How can I trade my tokens?
1. https://idex.market/eth/3des
2. https://forkdelta.app/#!/trade/0x115e7b7ecdd9792d6995cb426b2ef4d6119682a7-ETH
Topic: [Trade launch] ❤️❤️❤️ 3DES - The First Decentralized 3D Printing Slicer (Read 10981 times)
December 24, 2018, 12:04:36 AM
1. https://idex.market/eth/3des
2. https://forkdelta.app/#!/trade/0x115e7b7ecdd9792d6995cb426b2ef4d6119682a7-ETH
December 23, 2018, 05:20:03 PM
Tell me. Last fall, I participated in PreICO. The team after reported that there will be a future exchange of tokens for coins. This is true? Do I need to change my tokens somewhere?
Yes the Scam is a man.I took their shit on pre ICO, too.It's not worth anything and probably won't be.The team that put on the community, what else to expect from them 
November 20, 2018, 09:51:58 AM
Tell me. Last fall, I participated in PreICO. The team after reported that there will be a future exchange of tokens for coins. This is true? Do I need to change my tokens somewhere?
October 14, 2018, 06:06:15 PM
Hi, everybody.What's with the guys,he's still alive?The index is trading token 3DES,it is not yours?Proof https://idex.market/eth/3des
July 28, 2018, 09:48:43 AM
I bought some tokens before. Think that project has good chances to bring us x10 at least. Of course there are some risks.
July 28, 2018, 07:05:24 AM
Looks like those guys know what they're doing. I'm not famiar with 3d pronting, but that must be very relevant now.
July 28, 2018, 06:50:45 AM
You should reach more exchanges though.
July 24, 2018, 04:23:14 AM
if I look at the information in the whitepaper that, "The network members who have computing capacities will be able to provide slicing services to other members who need it and get paid in cryptocurrency", then the computer with specifications like what is needed to be able to provide slicing services and how much is the cost, do we set ourselves so that bargaining takes place?
July 24, 2018, 03:39:14 AM
Good desition to reach exchanges now. The market is very low.
July 22, 2018, 02:47:53 PM
I'm curious as to when everything will still be aware of the launch of the new token and the beginning of the auction? I also want to congratulate you on the successful end of the ICO!
July 22, 2018, 01:56:35 PM
How can I trade my tokens?
July 22, 2018, 11:39:45 AM
Will your ICO end tomorrow?
Not tomorrow but ended on 20 July 2018. 421,381.526 tokens sold. If you need more information contact their admin. July 22, 2018, 10:53:32 AM
Will your ICO end tomorrow?
July 17, 2018, 03:14:07 AM
3DES exchange listing changes my attention to the project from moderately negative to positive
July 16, 2018, 05:16:45 AM
Launching trades with a new token
The 3DES project is scaling up, announces a new token launch and the trade starts. At the moment the tokens are already listed on a decentralized exchange EtherDelta and soon will be listed on other exchanges. The 3DES team is actively developing the project.
Stay tuned!
exchange
Stay tuned!
exchange
July 13, 2018, 09:05:54 AM
I think that this plan is pretty a lucrative investment at the moment. Good luck all!
You're right. We all hope for the successful implementation of this project. Because he is able to change the industry for the better. One of the few projects that are attractive for long-term investment! A well-designed roadmap, transparency and projected growth - all this is not indifferent and does pass up! Definitely worth to participate!
July 08, 2018, 06:20:28 PM
I can sell 7000 DES tokens with price 0.25$ per token
June 26, 2018, 06:17:39 PM
wow A 3d designer and a owner of a bunch of 3d printers im super excited about this project and cant wait to see it in action as this would be a great new world of 3D community and software.
over the past few years ive spent a lot of money on 3D software that slows down your pc and tends to cause problems.
this would take 3D slicing into another level and i cant wait to use such a platform.
i wonder what would be the cost using this and interesting to see how it will be priced as the best software out on the market right now is about $149 and its a lifetime version.
one thing i know is that there would no longer be such a heavy usage of the cpu and if you really want to get into details than the lifespan of your pc will extend without this cpu stress.
over the past few years ive spent a lot of money on 3D software that slows down your pc and tends to cause problems.
this would take 3D slicing into another level and i cant wait to use such a platform.
i wonder what would be the cost using this and interesting to see how it will be priced as the best software out on the market right now is about $149 and its a lifetime version.
one thing i know is that there would no longer be such a heavy usage of the cpu and if you really want to get into details than the lifespan of your pc will extend without this cpu stress.
June 25, 2018, 05:35:30 AM
Hello,
Our team is thrilled to share a new feature of 3DES project!
The 3DES team’s task is to optimize the process of proceeding a large number of models using minimal resources. For this goal, we developed a decentralized computing capacities exchange for slicing tasks. While developing the system we assumed that the exchange can be scaled up for other tasks as well, besides only working with 3D models.
https://medium.com/@3desteam/new-feature-of-3des-project-336cc45a672b
Our team is thrilled to share a new feature of 3DES project!
The 3DES team’s task is to optimize the process of proceeding a large number of models using minimal resources. For this goal, we developed a decentralized computing capacities exchange for slicing tasks. While developing the system we assumed that the exchange can be scaled up for other tasks as well, besides only working with 3D models.
https://medium.com/@3desteam/new-feature-of-3des-project-336cc45a672b
June 16, 2018, 10:19:24 PM
as a graphic designer, 3d designer and a printer owner that have spent a LOT of money on software that mostly slows down any pc while working on a project, now this is one thing that im sure everyone hates and that is also what makes the process become longer than should.
i strongly believe this is a great solution to provide us the 3d printer owners, designers to create a bigger database of STL files.
we all know as designers that sometimes when you working on something that is NOT a 10 min simple design you would sometimes need another set of eyes that can get you through that part that is an issue, now if we have some sort of an STL market place / hire or just if you even want to contribute a group project that would make 3d software become old news and we would see a new era of 3d printing and designing.
just checked out the new site and im going to read the white paper again as i did about 4 months ago and most likely would also invest in this ico if US investors are allowed.
keep up the great project going as this would be a revolution in the 3d printing world.
i strongly believe this is a great solution to provide us the 3d printer owners, designers to create a bigger database of STL files.
we all know as designers that sometimes when you working on something that is NOT a 10 min simple design you would sometimes need another set of eyes that can get you through that part that is an issue, now if we have some sort of an STL market place / hire or just if you even want to contribute a group project that would make 3d software become old news and we would see a new era of 3d printing and designing.
just checked out the new site and im going to read the white paper again as i did about 4 months ago and most likely would also invest in this ico if US investors are allowed.
keep up the great project going as this would be a revolution in the 3d printing world.
Jump to: