TT-Miner 2022.4.1 KAWPOW, PROGPOW, ETHASH, ETCHASH, EPIC, SHA512256D, GHOSTRIDER - page 48.

TrailingStop

member

Activity: 566

Merit: 16

Quote from: ouray on March 17, 2019, 04:17:36 PM

Quote from: TrailingStop on March 17, 2019, 03:57:44 PM

Quote from: ouray on March 17, 2019, 03:52:46 PM

Quote from: TrailingStop on March 17, 2019, 03:40:10 PM

New version 2.1.18 ready for download.

Release notes:
- New option: -log creates a logfile that contains the screen output and
        additional information that could be helpful to find bugs.
- New option: -luck shows a second statistic line - additional to the rig
        speed. It shows the time it may take to find a new solution(share)
        at the current difficulty. It also calculates a 'luck' value that
        show the luck in percent for the next share.
- New option: --api-type does nothing so far, TT-Miner support TCP connections only
- Remove the three stars in the 'Accepted share' message.
- The meaning of the -A parameter changed slightly. If you define an algo without
- cuda version, TT-Miner will load the algo that fits best to your installed
- driver version - it will no longer load the algo for the last cuda version!

Please report all issues and bugs you find.

Thanks.

Will test --api-type and report back to you. Thank you.
You rock!

I hope that is what you expect? I'm not sure that I really got your point with this option. Anyway - let me know if I should change something.

Thanks - any happy mining.

Report:

1. --api-type (parameter ignored) OR --api-type TCP : does not work
2. CTRL+C still does not work. Have to press 'q' then 'ctrl+c'

Thank so much for taking the time to fix and release v2.1.18.

Hi,

what do you expect with --api-type TCP? Huh

? Please let me know step by step what you are doing please? API uses TCP - so that should work.

ouray

newbie

Activity: 49

Merit: 0

Quote from: TrailingStop on March 17, 2019, 03:57:44 PM

Quote from: ouray on March 17, 2019, 03:52:46 PM

Quote from: TrailingStop on March 17, 2019, 03:40:10 PM

New version 2.1.18 ready for download.

Release notes:
  - New option: -log creates a logfile that contains the screen output and
       additional information that could be helpful to find bugs.
  - New option: -luck shows a second statistic line - additional to the rig
       speed. It shows the time it may take to find a new solution(share)
       at the current difficulty. It also calculates a 'luck' value that
       show the luck in percent for the next share.
  - New option: --api-type does nothing so far, TT-Miner support TCP connections only
  - Remove the three stars in the 'Accepted share' message.
  - The meaning of the -A parameter changed slightly. If you define an algo without
  - cuda version, TT-Miner will load the algo that fits best to your installed
  - driver version - it will no longer load the algo for the last cuda version!

Please report all issues and bugs you find.

Thanks.

Will test --api-type and report back to you. Thank you.
You rock!

I hope that is what you expect? I'm not sure that I really got your point with this option. Anyway - let me know if I should change something.

Thanks - any happy mining.

Report:

1. --api-type (parameter ignored) OR --api-type TCP : does not work
2. CTRL+C still does not work. Have to press 'q' then 'ctrl+c'
3. Miner start up with few lines has dark-blue color, please change to a diff. collor.
Hard to see the text in dark-blue with black in background.

Thank so much for taking the time to fix and release v2.1.18.

TrailingStop

member

Activity: 566

Merit: 16

Quote from: ouray on March 17, 2019, 03:52:46 PM

Quote from: TrailingStop on March 17, 2019, 03:40:10 PM

New version 2.1.18 ready for download.

Release notes:
- New option: -log creates a logfile that contains the screen output and
        additional information that could be helpful to find bugs.
- New option: -luck shows a second statistic line - additional to the rig
        speed. It shows the time it may take to find a new solution(share)
        at the current difficulty. It also calculates a 'luck' value that
        show the luck in percent for the next share.
- New option: --api-type does nothing so far, TT-Miner support TCP connections only
- Remove the three stars in the 'Accepted share' message.
- The meaning of the -A parameter changed slightly. If you define an algo without
- cuda version, TT-Miner will load the algo that fits best to your installed
- driver version - it will no longer load the algo for the last cuda version!

Please report all issues and bugs you find.

Thanks.

Will test --api-type and report back to you. Thank you.
You rock!

I hope that is what you expect? I'm not sure that I really got your point with this option. Anyway - let me know if I should change something.

Thanks - any happy mining.

ouray

newbie

Activity: 49

Merit: 0

Quote from: TrailingStop on March 17, 2019, 03:40:10 PM

New version 2.1.18 ready for download.

Release notes:
- New option: -log creates a logfile that contains the screen output and
        additional information that could be helpful to find bugs.
- New option: -luck shows a second statistic line - additional to the rig
        speed. It shows the time it may take to find a new solution(share)
        at the current difficulty. It also calculates a 'luck' value that
        show the luck in percent for the next share.
- New option: --api-type does nothing so far, TT-Miner support TCP connections only
- Remove the three stars in the 'Accepted share' message.
- The meaning of the -A parameter changed slightly. If you define an algo without
- cuda version, TT-Miner will load the algo that fits best to your installed
- driver version - it will no longer load the algo for the last cuda version!

Please report all issues and bugs you find.

Thanks.

Will test --api-type and report back to you. Thank you.
You rock!

stolarzz

newbie

Activity: 111

Merit: 0

Quote from: TrailingStop on March 17, 2019, 03:40:10 PM

New version 2.1.18 ready for download.

Release notes:
- New option: -log creates a logfile that contains the screen output and
        additional information that could be helpful to find bugs.
- New option: -luck shows a second statistic line - additional to the rig
        speed. It shows the time it may take to find a new solution(share)
        at the current difficulty. It also calculates a 'luck' value that
        show the luck in percent for the next share.
- New option: --api-type does nothing so far, TT-Miner support TCP connections only
- Remove the three stars in the 'Accepted share' message.
- The meaning of the -A parameter changed slightly. If you define an algo without
- cuda version, TT-Miner will load the algo that fits best to your installed
- driver version - it will no longer load the algo for the last cuda version!

Please report all issues and bugs you find.

Thanks.

This version does not work for me on any rig, it turns off without any message after "work received".

TrailingStop

member

Activity: 566

Merit: 16

New version 2.1.18 ready for download.

Release notes:
- New option: -log creates a logfile that contains the screen output and
        additional information that could be helpful to find bugs.
- New option: -luck shows a second statistic line - additional to the rig
        speed. It shows the time it may take to find a new solution(share)
        at the current difficulty. It also calculates a 'luck' value that
        show the luck in percent for the next share.
- New option: --api-type does nothing so far, TT-Miner support TCP connections only
- Remove the three stars in the 'Accepted share' message.
- The meaning of the -A parameter changed slightly. If you define an algo without
- cuda version, TT-Miner will load the algo that fits best to your installed
- driver version - it will no longer load the algo for the last cuda version!

Please report all issues and bugs you find.

Thanks.

ouray

newbie

Activity: 49

Merit: 0

Quote from: george2019 on March 17, 2019, 12:48:33 PM

i use mintpond pool average daily hashrate on whattomine calculator and zcoin 24 hours earnings that mintpond statistic shows, you can look this statistic on minpond as well, for example:

https://i.imgur.com/uBKtTBw.png your daily earnings will depend both on pool luck and pool average accepted daily hashrate, well last two days luck was very good, today it is worse, daily accepted hashrate should be more or less same everyday if there's no connection problems and pool is working fine during that period, Round Est. for each block depends on average miner hashrate during that period + pool total hashrate, well more you have more you earn

Thank you!

george2019

jr. member

Activity: 83

Merit: 3

i use mintpond pool average daily hashrate on whattomine calculator and zcoin 24 hours earnings that mintpond statistic shows, you can look this statistic on minpond as well, for example:

https://i.imgur.com/uBKtTBw.png your daily earnings will depend both on pool luck and pool average accepted daily hashrate, well last two days luck was very good, today it is worse, daily accepted hashrate should be more or less same everyday if there's no connection problems and pool is working fine during that period, Round Est. for each block depends on average miner hashrate during that period + pool total hashrate, well more you have more you earn

ouray

newbie

Activity: 49

Merit: 0

Quote from: george2019 on March 17, 2019, 04:29:39 AM

actually with default intensity i got even better results in 24 hours, whattominer said only 0.53 zcoin for 14.3mh/sec in last 24 hours, i got around 0.61 zcoins, so i will use default intensity, for my celeron g1840 maybe it is more optimal setting than intensity 21, so i should put around 16mh/sec in whattomine calculator, average mintpont 1 day hashrate is 16mh/sec, it's main reason that i got 0.61 vs 0.53, mintpond gives quite good 0.0010 bitcoin profit daily for my rig, luck was very good as well in last 24 hour

>>>mintpond gives quite good 0.0010 bitcoin profit daily for my rig
For everyone or just you?
I am at MintPont too, can you tell where to look for that profit on the website? Thanks

george2019

jr. member

Activity: 83

Merit: 3

actually with default intensity i got even better results in 24 hours, whattominer said only 0.53 zcoin for 14.3mh/sec in last 24 hours, i got around 0.61 zcoins, so i will use default intensity, for my celeron g1840 maybe it is more optimal setting than intensity 21, so i should put around 16mh/sec in whattomine calculator, average mintpont 1 day hashrate is 16mh/sec, it's main reason that i got 0.61 vs 0.53, mintpond gives quite good 0.0010 bitcoin profit daily for my rig, luck was very good as well in last 24 hour

kalyanzb

newbie

Activity: 4

Merit: 0

Hi dev !!!
When miner for Linux ?

Vivik

full member

Activity: 197

Merit: 100

got out of position with nicehash, in TT-Miner.exe I replaced it using WinHex MTP -> MTP1, and MTP-100 -> MTP and now starts with CUDA10.0.
This is a temporary solution, so I corrected LYRA2V3.

alivanich

newbie

Activity: 21

Merit: 0

A good miner gives more hashes than cryptodredge. But he ate all my RAM!

My config:
11 x RX470 mining ethereum
8 x p106-100 mining XZC
4Gb RAM
60-100gb at virtual memory (it's enough)

Cryptodredge works fine and system use 3.0-3.2 gb
TT-Miner ate 4gb memory and system crashes
I try to run only 4 card on tt-miner, and everything was fine, there was enough RAM.

PS: hashes and config
p106-100 6gb
pl63, core +100, memory +420
Cryptodredge 1250
TT-Miner (-i=20) 1350

You can get more hashes, but energy efficiency will get worse.

Alexios777

newbie

Activity: 42

Merit: 0

Quote from: TrailingStop on March 15, 2019, 06:12:38 PM

Quote from: Alexios777 on March 15, 2019, 04:34:56 PM

Not sure what is going on, here is the deal - with TTMiner (tried different AB and intensity settings) I barely ever get any shares found example: 8 cards in 15min only 4 cards found few shares and that's all, thus my results on pool are terrible, and completely different situation with a different miner. Am I doing something wrong? BTW hashrate in TTMiner is higher than other miners, but share problem makes it impossible for me to use TTMiner.

Hi Alexios777,

could you please share some more information so that I can try to help? I guess you are mining MTP? Can you please let me know which pool you use? Some pools start with a high diff so the it might take some time to find a share. TT-Miner shows you the diff if it receives an update from the pool. You can then calculate how long it should take in AVERAGE, until your system finds a share. If the diff from the pool is 1GH and your systems hashrate is 10MH/s it will take 1GH / 10MH/s = 100 seconds until you find a share - that is the statistical average over a long time. It can take longer and you system can also find shares faster than that.
I will add some output that gives you statistical information. So you can see if the system is low or fast - related to the diff it gets from the pool.

If you run TT-Miner with -logpool I can see if your system behaves as expected or if something is not OK and need to be fixed.

Thanks.

Mining MTP, 2miners pool, 8x1080ti, win10 not sure how to use logpool, and which intensity to use. thanks

TrailingStop

member

Activity: 566

Merit: 16

Quote from: george2019 on March 16, 2019, 04:52:12 AM

yes 160mh/sec is quite large hashrate, it's better to test at least 3 day (around 72 hours) to find out which give better profit, for my 14.3 mh/sec smaller rig mintpond was better, you should get around 6 zcoins daily

Hi stolarzz & george2019,

thanks that you spend your time for sharing your insights - they are very useful for others miners - that's really fair!

Thx.

george2019

jr. member

Activity: 83

Merit: 3

yes 160mh/sec is quite large hashrate, it's better to test at least 3 day (around 72 hours) to find out which give better profit, for my 14.3 mh/sec smaller rig mintpond was better, you should get around 6 zcoins daily

stolarzz

newbie

Activity: 111

Merit: 0

Quote from: george2019 on March 16, 2019, 04:38:21 AM

it's also luck but i compared whattomine 24 hour profit for that day and mintpond showed much better results at least for one day, actually difficulty was little bit higher when i tested mintpond

Just switched my 160mh/s to mintpond, last month it was on 2miners, im going to compare it after few days

george2019

jr. member

Activity: 83

Merit: 3

it's also luck but i compared whattomine 24 hour profit for that day and mintpond showed much better results at least for one day, actually difficulty was little bit higher when i tested mintpond, i also checked average pool hashrates and mintpond somehow showed better results, now i'm testing with default 20 intensity, maybe there's no difference in pool average hashrates VS intensity 21 let's see

stolarzz

newbie

Activity: 111

Merit: 0

Quote from: george2019 on March 16, 2019, 03:33:53 AM

for my rig mintpond was clear winner with hashrate of 14.3mh.sec TDP 70% + intensity 21 with 2miners i got only 0.475 zcoins (whattomine calculator showed 0.55) vs 0.60 zcoins on mintpond (whattomine calculator showed 0.545 zcoin) today i will test intensity 22 on mintpond european server for 24 hours, then default intensity 20 as well let's see which is more profitable, with intesnity 21 stability was fine, i think 22 intensity is too much for my rig (some slowdowns and rejected shares), then i will test with intensity 20 and find out which give better average hashrates 20 or 21, with intensity 20 hashrate is same as with intensity 21, intensity 22 had 15mh/sec, while intensity 20-21 both have 14.3mh/sec in miner

It's impossible to compare day by day. One day diff is a bit higher another day a bit lower.

george2019

jr. member

Activity: 83

Merit: 3

for my rig mintpond was clear winner with hashrate of 14.3mh.sec TDP 70% + intensity 21 with 2miners i got only 0.475 zcoins (whattomine calculator showed 0.55) vs 0.60 zcoins on mintpond (whattomine calculator showed 0.545 zcoin) today i will test intensity 22 on mintpond european server for 24 hours, then default intensity 20 as well let's see which is more profitable, with intesnity 21 stability was fine, i think 22 intensity is too much for my rig (some slowdowns and rejected shares), then i will test with intensity 20 and find out which give better average hashrates 20 or 21, with intensity 20 hashrate is same as with intensity 21, intensity 22 had 15mh/sec, while intensity 20-21 both have 14.3mh/sec in miner

Topic: TT-Miner 2022.4.1 KAWPOW, PROGPOW, ETHASH, ETCHASH, EPIC, SHA512256D, GHOSTRIDER - page 48. (Read 132259 times)