Hy guys can anyone help me about my new sp20
i´m using 2x Inter-Tech Combat Power, aktive PFC, 750 Watt (
http://www.future-x.at/inter-tech-combat-power-aktive-pfc-750-watt-p-73253/ )
what i´m getting is a shutdown after slow start
as long as i have the settings on 150 w everything works great
when i put it to 170w or more the shit breaks and first the psu and few seconds later the sp20 shuts down.
best regards
//
12/01 11:23:04:---- RUNNING SLOWSTART -----
12/01 11:23:04:Started!
spond-manager stop
Stopping MG
12/01 11:23:13:Signal
spond-manager start
12/01 11:36:27:---- RUNNING SLOWSTART -----
12/01 11:36:27:Started!
Stopping MG
12/01 11:42:27:Signal
12/01 11:42:27:DC2DC ASIC WARNING [2]: 7B=0x 0, 7A= 0, 78= 0, 7D=ff 79=0 80=1
12/01 11:42:27:dc2dc i2c error ASIC:2
12/01 11:42:27:restart_asics_full (Dc2Dc i2c error)
12/01 11:42:27:Testing LOOPs (verbose=0)
12/01 11:42:27:Testing DC2DC
12/01 11:42:27:Testing LOOPs done = ret=0
12/01 11:42:28:Restart ASICS done :)0
spond-manager start
12/01 11:42:34:---- RUNNING SLOWSTART -----
12/01 11:42:34:Started!
12/01 11:42:36:DC2DC ASIC WARNING [1]: 7B=0xa0, 7A= 0, 78=11, 7D= 0 79=4011 80=1
12/01 11:45:29:Testing LOOPs (verbose=1)
12/01 11:45:29:Testing DC2DC
12/01 11:45:29:DC2DC ASIC WARNING
- : 7B=0x 0, 7A= 0, 78= 0, 7D= 0 79=0 80=1
12/01 11:45:29:DC2DC ASIC WARNING
- : 7B=0x 0, 7A= 0, 78= 0, 7D= 0 79=0 80=1
12/01 11:45:29:DC2DC ASIC WARNING
- : 7B=0x 0, 7A= 0, 78= 0, 7D= 0 79=0 80=3
12/01 11:45:29:DC2DC ASIC WARNING
- : 7B=0x 0, 7A= 0, 78= 0, 7D= 0 79=0 80=3
12/01 11:45:29:DC2DC ASIC WARNING [1]: 7B=0x 0, 7A= 0, 78= 0, 7D= 0 79=0 80=1
12/01 11:45:29:DC2DC ASIC WARNING [1]: 7B=0x 0, 7A= 0, 78= 0, 7D= 0 79=0 80=1
12/01 11:45:29:DC2DC ASIC WARNING [1]: 7B=0x 0, 7A= 0, 78= 0, 7D= 0 79=0 80=3
12/01 11:45:29:DC2DC ASIC WARNING [1]: 7B=0x 0, 7A= 0, 78= 0, 7D= 0 79=0 80=3
12/01 11:45:29:DC2DC ASIC WARNING [2]: 7B=0x 0, 7A= 0, 78= 0, 7D= 0 79=0 80=1
12/01 11:45:29:DC2DC ASIC WARNING [2]: 7B=0x 0, 7A= 0, 78= 0, 7D= 0 79=0 80=1
12/01 11:45:29:DC2DC ASIC WARNING [2]: 7B=0x 0, 7A= 0, 78= 0, 7D= 0 79=0 80=3
12/01 11:45:29:DC2DC ASIC WARNING [2]: 7B=0x 0, 7A= 0, 78= 0, 7D= 0 79=0 80=3
12/01 11:45:29:DC2DC ASIC WARNING [3]: 7B=0x 0, 7A= 0, 78= 0, 7D= 0 79=0 80=1
12/01 11:45:29:DC2DC ASIC WARNING [3]: 7B=0x 0, 7A= 0, 78= 0, 7D= 0 79=0 80=1
12/01 11:45:29:DC2DC ASIC WARNING [3]: 7B=0x 0, 7A= 0, 78= 0, 7D= 0 79=0 80=3
12/01 11:45:29:DC2DC ASIC WARNING [3]: 7B=0x 0, 7A= 0, 78= 0, 7D= 0 79=0 80=3
12/01 11:45:29:dc2dc i2c error ASIC:4
12/01 11:45:29:dc2dc i2c error ASIC:5
12/01 11:45:29:dc2dc i2c error ASIC:6
12/01 11:45:29:dc2dc i2c error ASIC:7
12/01 11:45:29:ERROR: Loop failed 2 (1) - look for bad ASICs there!
12/01 11:45:29:ERROR: Loop failed 3 (1) - look for bad ASICs there!
12/01 11:45:29:Testing LOOPs done = ret=6
12/01 11:45:29:Data Timeout on read fffe:70 (0), (problem:6)
12/01 11:45:29:restart_asics_full (read timeout on problem or AC2DC fail)
12/01 11:45:29:Testing LOOPs (verbose=0)
12/01 11:45:29:Testing DC2DC
12/01 11:45:29:dc2dc i2c error ASIC:4
12/01 11:45:29:dc2dc i2c error ASIC:5
12/01 11:45:29:dc2dc i2c error ASIC:6
12/01 11:45:29:dc2dc i2c error ASIC:7
12/01 11:45:29:ERROR: Loop failed 2 (2) - look for bad ASICs there!
12/01 11:45:29:ERROR: Loop failed 3 (2) - look for bad ASICs there!
12/01 11:45:29:Testing LOOPs done = ret=6
12/01 11:45:29:Loop missing in discovery 2 (code 5)
12/01 11:45:29:Loop missing in discovery 3 (code 5)
12/01 11:45:29:Not all ASICs recover
Minergate died and restarted
12/01 11:45:42:---- RUNNING SLOWSTART -----
Cgminer died and restarted
12/01 11:45:43:Started!
12/01 11:45:44:Loop missing in discovery 2 (code 1)
12/01 11:45:44:Loop missing in discovery 3 (code 1)
Cgminer died and restarted
Stopping MG
12/01 11:46:04:Signal
spond-manager start
12/01 11:46:11:---- RUNNING SLOWSTART -----
12/01 11:46:11:Started!
12/01 11:46:12:Loop missing in discovery 2 (code 1)
12/01 11:46:12:Loop missing in discovery 3 (code 1)