Yeah I'm pretty happy with my SP20.
First unit had to be RMA'ed, as it only had 7 out of 8 ASICS going, but even with that, it was pulling 1300 gh/s. They shipped me the new replacement unit as soon as I got a tracking number for the old one, so it was only a couple of days worth of lost hashing.
New unit, is pulling 1500 and change gh/s with 240/240/240/240 W per PCI-E cable, running on a 1000 W power supply.
I have taken it to 1.7 gh/s with 2 different power supplies, 2 x PCI-E cables each, with 270x4, but it loses efficiency.
I'm happy with one power supply feeding it with a slight underclock and underpower.
Would buy one again, but I don't have the power to run all my miners. I'm already running a cable from the garage, and a cable from the other room. Lol !
Sucking down juice from 3 circuits.
Topic: Unofficial Spondoolies SP20 thread - page 47. (Read 126213 times)
Anyone know if I'll run into any issues with SP20 setup? It will be on a 10.10.90.x network, but the computer I will be using to access that network will be on a 192.168.1.x network. My IT guy has my miners on a different network than our main one, to keep some stuff off limits. I can typically just type in the ip address of my dragons, s3, etc and get to their interfaces.
It looks like the SP has a different web gui to do that.
You'll need to get the miner's IP manually (not through myminer.io) and then you'll be able to access the miner web UIIt looks like the SP has a different web gui to do that.
Wow, thanks for the quick response. Hopefully they'll arrive Monday and I'll get to work on them. Can't wait to compare them with a live S5 unit. I've got to do some year-end buying for tax reasons and I'm down to these 2 choices.
Maybe I'll be a legendary by the next time you send out review units
Well im not interested of underclock and dont care of low fan mode.
I just upgrade and i see cgminer4.8.0, last one was cgminer4.7.0 i think.
Im impressed, Sp tech provide so much updates. Keep good work guys.
I just upgrade and i see cgminer4.8.0, last one was cgminer4.7.0 i think.
Im impressed, Sp tech provide so much updates. Keep good work guys.
Anyone know if I'll run into any issues with SP20 setup? It will be on a 10.10.90.x network, but the computer I will be using to access that network will be on a 192.168.1.x network. My IT guy has my miners on a different network than our main one, to keep some stuff off limits. I can typically just type in the ip address of my dragons, s3, etc and get to their interfaces.
It looks like the SP has a different web gui to do that.
You'll need to get the miner's IP manually (not through myminer.io) and then you'll be able to access the miner web UI It looks like the SP has a different web gui to do that.
Anyone know if I'll run into any issues with SP20 setup? It will be on a 10.10.90.x network, but the computer I will be using to access that network will be on a 192.168.1.x network. My IT guy has my miners on a different network than our main one, to keep some stuff off limits. I can typically just type in the ip address of my dragons, s3, etc and get to their interfaces.
It looks like the SP has a different web gui to do that.
It looks like the SP has a different web gui to do that.
Found this yammy bitcoin under my tree this morning 
...
...
Sweet!
There is new firmware 2.5.58
yesterday was another 2.5.57
few days before again..
new version everyday. But i wonder if they have any sense to upgrade?
I install all upgrades till now i don't see any changing in performance.
I just want to see some info.
In technical blog there is info just for 2.5.54
Anyway i wish happy minning to everyone and merry Christmas !
yesterday was another 2.5.57
few days before again..
new version everyday. But i wonder if they have any sense to upgrade?I install all upgrades till now i don't see any changing in performance.
I just want to see some info.
In technical blog there is info just for 2.5.54
Anyway i wish happy minning to everyone and merry Christmas !
There is new firmware 2.5.58
yesterday was another 2.5.57
few days before again..
new version everyday. But i wonder if they have any sense to upgrade?
I install all upgrades till now i don't see any changing in performance.
I just want to see some info.
In technical blog there is info just for 2.5.54
Anyway i wish happy minning to everyone and merry Christmas !
yesterday was another 2.5.57
few days before again..
new version everyday. But i wonder if they have any sense to upgrade?I install all upgrades till now i don't see any changing in performance.
I just want to see some info.
In technical blog there is info just for 2.5.54
Anyway i wish happy minning to everyone and merry Christmas !
I am running on
2.5.57 = 2x machines
2.5.54 = 6x machines
54 allows fans to go to 20 instead of 40 if you underclock
57 has reboot if your hash drops to low.
58 ?? i have not tried it yet.
updated to 2.5.58 (2.5.54 and 2.5.57 were not available, so I guess there is something not optimal about them)-was running on 2.5.33 before, so not sure what's new: minimal hash is set to 500, but could be changed, there is a FPGA setting, asic stats look slightly different.
Found this yammy bitcoin under my tree this morning
There is new firmware 2.5.58
yesterday was another 2.5.57
few days before again..
new version everyday. But i wonder if they have any sense to upgrade?
I install all upgrades till now i don't see any changing in performance.
I just want to see some info.
In technical blog there is info just for 2.5.54
Anyway i wish happy minning to everyone and merry Christmas !
yesterday was another 2.5.57
few days before again..
new version everyday. But i wonder if they have any sense to upgrade?I install all upgrades till now i don't see any changing in performance.
I just want to see some info.
In technical blog there is info just for 2.5.54
Anyway i wish happy minning to everyone and merry Christmas !
I am running on
2.5.57 = 2x machines
2.5.54 = 6x machines
54 allows fans to go to 20 instead of 40 if you underclock
57 has reboot if your hash drops to low.
58 ?? i have not tried it yet.
Time + posts + a random number , but after you get to 1040 or 1060 it is automatic. IIRC
Ok, let me rephrase Time it's not the only thing that counts I was referring to my registration date .. and quite frankly I don't
The almighty Legendary members..I got like a year 
Time doesn't count LOL
However, what you do with it .. Time + posts + a random number , but after you get to 1040 or 1060 it is automatic. IIRC
The almighty Legendary members..I got like a year
Time doesn't count LOL
However, what you do with it .. 
Congrats guys
Thanks for all support nice to see the word legendary .
* Xian01 does the secret Legendary handshake with philipma1957
'grats and well deserved
We few, we happy few, we (Legendary) band of brothers;
spiccioli
The almighty Legendary members..I got like a year
By then we'll be Leet members.
Thanks for all support nice to see the word legendary .
* Xian01 does the secret Legendary handshake with philipma1957
'grats and well deserved
We few, we happy few, we (Legendary) band of brothers;
spiccioli
The almighty Legendary members..I got like a year
i'm just a little raskul, i'll never get there
Thanks for all support nice to see the word legendary .
* Xian01 does the secret Legendary handshake with philipma1957
'grats and well deserved
We few, we happy few, we (Legendary) band of brothers;
spiccioli
The almighty Legendary members..I got like a year
Thanks again.
I got my 7th and 8th sp20's today
I is running at 836 watts and 1385gh fan at 40 = .6 watts a gh and it is a bit hot. it is in the attached garage and with the rainstorm in NJ I have the garage shut so ambient temp is 87f
now the super under clock is in my spare bedroom fan at 10 via ssh and the db is 63
watts are 480 at the kwatt meter and gh is 1028
this is 0.467 watts
Current firmware version: 2.5.57
I look forward to the s-5 comparison. for the first time in a while I think we are going to see a close match in gear.
I got my 7th and 8th sp20's today
I is running at 836 watts and 1385gh fan at 40 = .6 watts a gh and it is a bit hot. it is in the attached garage and with the rainstorm in NJ I have the garage shut so ambient temp is 87f
now the super under clock is in my spare bedroom fan at 10 via ssh and the db is 63
watts are 480 at the kwatt meter and gh is 1028
this is 0.467 watts
Current firmware version: 2.5.57
I look forward to the s-5 comparison. for the first time in a while I think we are going to see a close match in gear.
Thanks for all support nice to see the word legendary .
* Xian01 does the secret Legendary handshake with philipma1957
'grats and well deserved
We few, we happy few, we (Legendary) band of brothers;
spiccioli
Thanks for all support nice to see the word legendary .
* Xian01 does the secret Legendary handshake with philipma1957
'grats and well deserved
Jump to: