sgminer only HW on driver 15.7
nice release.
well read past post for how to proceed... (and use small worksize and several threads... and adjust the intensity so that it doesn't use more memory than the card has....) nice release.
Topic: Vertcoin - 1 | ASIC - 0 | Lyra2RE | Decentralised | GPU Mineable | Open Source - page 76. (Read 415451 times)
August 10, 2015, 09:54:44 AM
August 10, 2015, 08:58:12 AM
sgminer only HW on driver 15.7
nice release.
nice release.
August 10, 2015, 08:44:01 AM
Quote
produce the bin with 14.4 driver version then move to your prefered catalyst version
use what is on the git not the couple of files I released yesterday
use what is on the git not the couple of files I released yesterday
I did just that, but the same error when starting the miner, all cards fail and restart is needed. Using old settings, with newest 15.7.1 x64 driver. Lyra2REv2Tahitigw256l4lgtc1024000.bin was made with 14.4.
"xintensity" : "500",
"worksize" : "256",
"kernel" : "Lyra2REv2",
"algorithm" : "Lyra2REv2",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"gpu-fan" : "100",
"gpu-threads" : "2",
"gpu-memclock" : "1600",
"gpu-engine" : "1120,1120,1120,1100",
"gpu-powertune" : "20",
Try using a worksize of 32 and an intensity of 17.
August 10, 2015, 08:32:35 AM
Quote
produce the bin with 14.4 driver version then move to your prefered catalyst version
use what is on the git not the couple of files I released yesterday
use what is on the git not the couple of files I released yesterday
I did just that, but the same error when starting the miner, all cards fail and restart is needed. Using old settings, with newest 15.7.1 x64 driver. Lyra2REv2Tahitigw256l4lgtc1024000.bin was made with 14.4.
"xintensity" : "500",
"worksize" : "256",
"kernel" : "Lyra2REv2",
"algorithm" : "Lyra2REv2",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"gpu-fan" : "100",
"gpu-threads" : "2",
"gpu-memclock" : "1600",
"gpu-engine" : "1120,1120,1120,1100",
"gpu-powertune" : "20",
August 10, 2015, 06:03:30 AM
https://wallet.thisisvtc.com is working after the fork.
August 10, 2015, 04:19:40 AM
Are exchanges notified of the mandatory wallet update?
Verters.com: Current Block 347029
cryptsy.com: Current Block 347016
bittrex.com: Current Block 347013
Verters.com: Current Block 347029
cryptsy.com: Current Block 347016
bittrex.com: Current Block 347013
FYI: https://www.reddit.com/r/vertcoin/comments/3f6kon/official_hard_fork_at_block_347000_mandatory/ctx26d7
August 10, 2015, 03:42:33 AM
Are exchanges notified of the mandatory wallet update?
Verters.com: Current Block 347029
cryptsy.com: Current Block 347016
bittrex.com: Current Block 347013
Verters.com: Current Block 347029
cryptsy.com: Current Block 347016
bittrex.com: Current Block 347013
August 09, 2015, 09:32:57 PM
i have the same thing,not looking good no amd miner and no help
it is all over the 2 past pages, it was repeated several times already... (and like I said a week ago: check your system before the fork...)what exactly you mean by check your system before the fork? those with 280x should..buy 290x to be able to mine ?
can you guys post what kernel/bin and catalyst you use to mine with 280x ?
14.4 with official kernel doesnt start
use what is on the git not the couple of files I released yesterday
August 09, 2015, 09:24:13 PM
i have the same thing,not looking good no amd miner and no help
it is all over the 2 past pages, it was repeated several times already... (and like I said a week ago: check your system before the fork...)what exactly you mean by check your system before the fork? those with 280x should..buy 290x to be able to mine ?
can you guys post what kernel/bin and catalyst you use to mine with 280x ?
14.4 with official kernel doesnt start
August 09, 2015, 09:16:58 PM
I'm using a .bin created with 14.4 drivers but I had to update to 15.7.1, now is working without HW errors and an R9 280X.
at least one 280x which works...what hashrate do you get ?
ok... can someone try using 14.4drivers and see if it works ?
4.006 Mhash @ 1050 MHz core, 1500 MHz Mem.
August 09, 2015, 08:43:16 PM
i have the same thing,not looking good no amd miner and no help
it is all over the 2 past pages, it was repeated several times already... (and like I said a week ago: check your system before the fork...) August 09, 2015, 07:48:57 PM
this are my settings for r9 290 = 7mh:
{
"pools" : [
{
"url" : "stratum+tcp://pool.verters.com:3333",
"user" : "xxxxx",
"pass" : "xxxxx"
}
]
,
"intensity" : "16",
"worksize" : "32",
"kernel" : "Lyra2REv2",
"algorithm" : "Lyra2REv2",
"no-submit-stale" : true,
"gpu-threads" : "18",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "85",
"temp-overheat" : "82",
"temp-target" : "67",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "20",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"verbose" : "true"
}
{
"pools" : [
{
"url" : "stratum+tcp://pool.verters.com:3333",
"user" : "xxxxx",
"pass" : "xxxxx"
}
]
,
"intensity" : "16",
"worksize" : "32",
"kernel" : "Lyra2REv2",
"algorithm" : "Lyra2REv2",
"no-submit-stale" : true,
"gpu-threads" : "18",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "85",
"temp-overheat" : "82",
"temp-target" : "67",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "20",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"verbose" : "true"
}
August 09, 2015, 07:39:40 PM
i have the same thing,not looking good no amd miner and no help
August 09, 2015, 05:38:35 PM
I forgot to change to the new Lyra2REv2 kernel and with the old one I had all rejected, share below target and with the new kernel the miner just doesnt start at all, the gpu's driver fail instantly, 4x R9 280x Win7 x64 with 14.4 catalyst. Is the problem with the kernel or settings are not the same as before ?
August 09, 2015, 05:19:43 PM
does anyone have a amd that works can you post full setting
August 09, 2015, 02:24:49 PM
Can someone help me? I am using vert.poolers testnet, but SGminer does not seem to be getting any accepted shares. I am using 280x, but have also tried on a 290 with the same result. I used 14.4 drivers and it shows that it is hashing, just all HW errors though.
August 09, 2015, 02:23:55 PM
Please UPDATE Your VTC Wallets 
* Countdown *
https://give-me-coins.com/pool/vtc-fork-countdown
MANDATORY UPDATE - HARD FORK AT BLOCK 347000 - UPDATE YOUR WALLETS NOW!
https://github.com/vertcoin/vertcoin/releases/tag/v0.10.0.0
New sgminer: https://github.com/djm34/sgminer/releases/
New ccminer: https://github.com/djm34/ccminer-lyra/releases
* Countdown *
https://give-me-coins.com/pool/vtc-fork-countdown
MANDATORY UPDATE - HARD FORK AT BLOCK 347000 - UPDATE YOUR WALLETS NOW!
https://github.com/vertcoin/vertcoin/releases/tag/v0.10.0.0
New sgminer: https://github.com/djm34/sgminer/releases/
New ccminer: https://github.com/djm34/ccminer-lyra/releases
August 09, 2015, 02:21:46 PM
stratum+tcp://pool.verters/com:3333 -a lyra2re2 or lyra2v2 depending on kernel. Port 4444 also after block 347000
Verters pool. The oldest Vertcoin pool. SSL enabled https://pool.verters.com. Get ready.. .Now
Verters pool. The oldest Vertcoin pool. SSL enabled https://pool.verters.com. Get ready.. .Now
August 09, 2015, 11:20:48 AM
OK same shit diffrent RIG...
On my RIG whit 5 280X, the Miner Do not Start
Driver Catalyst 14.4 Win 8.1
BUG:
WTF MUTEX ERROR ON LOCK! errno-0 in adl.c lock adl
in the Miner cmd field...
On my RIG whit 5 280X, the Miner Do not Start
Driver Catalyst 14.4 Win 8.1
BUG:
WTF MUTEX ERROR ON LOCK! errno-0 in adl.c lock adl
in the Miner cmd field...
Someone please post Tahiti kernel bin.
August 09, 2015, 11:11:06 AM
OK same shit diffrent RIG...
On my RIG whit 5 280X, the Miner Do not Start
Driver Catalyst 14.4 Win 8.1
BUG:
WTF MUTEX ERROR ON LOCK! errno-0 in adl.c lock adl
in the Miner cmd field...
On my RIG whit 5 280X, the Miner Do not Start
Driver Catalyst 14.4 Win 8.1
BUG:
WTF MUTEX ERROR ON LOCK! errno-0 in adl.c lock adl
in the Miner cmd field...
Jump to: