Vertcoin - 1 | ASIC - 0 | Lyra2RE | Decentralised | GPU Mineable | Open Source - page 72.

fenomenhaa

sr. member

Activity: 248

Merit: 250

Quote from: djm34 on August 11, 2015, 01:37:43 PM

Quote from: fenomenhaa on August 11, 2015, 01:35:31 PM

Quote from: fenomenhaa on August 11, 2015, 06:58:13 AM

Quote from: ReiMomo on August 11, 2015, 05:49:04 AM

Quote from: fenomenhaa on August 11, 2015, 04:24:40 AM

Could anyone share the working bin(14.4 or not i don't know)

)

I would if I find a place to upload but then the bat settings will be tied to that bin, so the best thing to do is follow the instructions about the amdocl.dll File from post 1318 and someone upload the amdocl.dll file somewhere else.

i pasted the 14.4 amdocl.ddl files to sg miner folder.Still loe hashrate and %50 rejects and 1high-hash" error.

What's this high hash? How can i fix it? Anyone have an idea?

you need to change the difficulty (don't remember the name) --help should tell you and it is either 2 or 0.5

--difficulty-multiplier fixed my problem, now i'm able to run 4.3mh/s with hynix 280x..

fredeq

legendary

Activity: 1537

Merit: 1005

Quote from: pwpwpw on August 11, 2015, 02:05:29 PM

anyone else gets GF stratum disconnects on verters pool? About 3-4 every hour the pool disconnects for a second or 2 and starts with lowest diff again.

yep, same here

pwpwpw

hero member

Activity: 908

Merit: 503

anyone else gets GF stratum disconnects on verters pool? About 3-4 every hour the pool disconnects for a second or 2 and starts with lowest diff again.

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: djmic2k on August 11, 2015, 01:45:22 PM

ccminer v0.4 by djm34 shows more than 20000 khash but pool show only 10300 khash after 12+ hours mining. why?

--diff 2

fredeq

legendary

Activity: 1537

Merit: 1005

@gotchay many people already pasted configs, no need to keep reposting Wink

just for the sake of the question: `sgminer.exe --no-submit-stale --kernel Lyra2REv2 -o stratum+tcp://pool.verters.com:4444 -u fredeq.1 -p 123 -g 2 -w 64 -I 18`
and remember about copying amdocl.dll and msvcr110.dll from 14.4 catalyst (cant confirm 14.6 or .7)

djmic2k

newbie

Activity: 44

Merit: 0

ccminer v0.4 by djm34 shows more than 20000 khash but pool show only 10300 khash after 12+ hours mining. why?
http://i59.tinypic.com/2r7vcx5.jpg

gotchay

newbie

Activity: 21

Merit: 0

Quote from: fredeq on August 11, 2015, 12:57:14 PM

Managed to run my 280x at 4,1 Mhash.

Pool reports way more than that though, between 6 and 8Mhash.
Anyone else got that too?

Could you please post your config, this would help a lot of people.

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: fenomenhaa on August 11, 2015, 01:35:31 PM

Quote from: fenomenhaa on August 11, 2015, 06:58:13 AM

Quote from: ReiMomo on August 11, 2015, 05:49:04 AM

Quote from: fenomenhaa on August 11, 2015, 04:24:40 AM

Could anyone share the working bin(14.4 or not i don't know)

)

I would if I find a place to upload but then the bat settings will be tied to that bin, so the best thing to do is follow the instructions about the amdocl.dll File from post 1318 and someone upload the amdocl.dll file somewhere else.

i pasted the 14.4 amdocl.ddl files to sg miner folder.Still loe hashrate and %50 rejects and 1high-hash" error.

What's this high hash? How can i fix it? Anyone have an idea?

you need to change the difficulty (don't remember the name) --help should tell you and it is either 2 or 0.5

pwpwpw

hero member

Activity: 908

Merit: 503

Quote from: fenomenhaa on August 11, 2015, 01:35:31 PM

Quote from: fenomenhaa on August 11, 2015, 06:58:13 AM

Quote from: ReiMomo on August 11, 2015, 05:49:04 AM

Quote from: fenomenhaa on August 11, 2015, 04:24:40 AM

Could anyone share the working bin(14.4 or not i don't know)

)

I would if I find a place to upload but then the bat settings will be tied to that bin, so the best thing to do is follow the instructions about the amdocl.dll File from post 1318 and someone upload the amdocl.dll file somewhere else.

i pasted the 14.4 amdocl.ddl files to sg miner folder.Still loe hashrate and %50 rejects and 1high-hash" error.

What's this high hash? How can i fix it? Anyone have an idea?

I get this on give-me-coins only, try other pools maybe.

fenomenhaa

sr. member

Activity: 248

Merit: 250

Quote from: fenomenhaa on August 11, 2015, 06:58:13 AM

Quote from: ReiMomo on August 11, 2015, 05:49:04 AM

Quote from: fenomenhaa on August 11, 2015, 04:24:40 AM

Could anyone share the working bin(14.4 or not i don't know)

)

I would if I find a place to upload but then the bat settings will be tied to that bin, so the best thing to do is follow the instructions about the amdocl.dll File from post 1318 and someone upload the amdocl.dll file somewhere else.

i pasted the 14.4 amdocl.ddl files to sg miner folder.Still loe hashrate and %50 rejects and 1high-hash" error.

What's this high hash? How can i fix it? Anyone have an idea?

fredeq

legendary

Activity: 1537

Merit: 1005

Managed to run my 280x at 4,1 Mhash.

Pool reports way more than that though, between 6 and 8Mhash.
Anyone else got that too?

znewsham

newbie

Activity: 6

Merit: 0

Quote from: ?? on ??

Quote from: znewsham on August 11, 2015, 11:39:18 AM

Quote from: ?? on ??

Quote from: znewsham on August 11, 2015, 11:13:59 AM

Hi all,

I'm stuck getting sgminer to work with the new VTC algo, CPU miner works fine, and sgminer worked fine BEFORE the fork. Now I get a few hardware errors, and no shares whatsoever (not even stale). I've tried two pools (pool.verters.com and coinotron.com).

The hardware error I get is "Invalid Nonce". I've tried with different combinations of worksize and intensity, nothing seems to help.

I'm using 64bit Ubuntu 14.04, with the AMD 15.20 drivers. My graphics cards are a pair of R9 270.

Any thoughts on what could be going wrong? I've looked through previous posts but none of the potential solutions worked.

Thanks

Pitcairn is affected by the same issue with newer drivers - older ones should work.

How do you install multiple copies of the driver, or are you suggesting I should just permanently downgrade to 14? (Which version precisely works?)

I believe 14.4/14.6/14.7 all should be fine - as for multiple copies... don't fuck with the libs unless you've got an exellent handle on how they work - downgrading is better.

Thanks, silly question - where can I download those versions? AMD website only has 14.12 and 15.*

znewsham

newbie

Activity: 6

Merit: 0

Quote from: ?? on ??

Quote from: znewsham on August 11, 2015, 11:13:59 AM

Hi all,

I'm stuck getting sgminer to work with the new VTC algo, CPU miner works fine, and sgminer worked fine BEFORE the fork. Now I get a few hardware errors, and no shares whatsoever (not even stale). I've tried two pools (pool.verters.com and coinotron.com).

The hardware error I get is "Invalid Nonce". I've tried with different combinations of worksize and intensity, nothing seems to help.

I'm using 64bit Ubuntu 14.04, with the AMD 15.20 drivers. My graphics cards are a pair of R9 270.

Any thoughts on what could be going wrong? I've looked through previous posts but none of the potential solutions worked.

Thanks

Pitcairn is affected by the same issue with newer drivers - older ones should work.

How do you install multiple copies of the driver, or are you suggesting I should just permanently downgrade to 14? (Which version precisely works?)

znewsham

newbie

Activity: 6

Merit: 0

Quote from: jamesl22 on August 11, 2015, 11:25:37 AM

Quote from: znewsham on August 11, 2015, 11:13:59 AM

Hi all,

I'm stuck getting sgminer to work with the new VTC algo, CPU miner works fine, and sgminer worked fine BEFORE the fork. Now I get a few hardware errors, and no shares whatsoever (not even stale). I've tried two pools (pool.verters.com and coinotron.com).

The hardware error I get is "Invalid Nonce". I've tried with different combinations of worksize and intensity, nothing seems to help.

I'm using 64bit Ubuntu 14.04, with the AMD 15.20 drivers. My graphics cards are a pair of R9 270.

Any thoughts on what could be going wrong? I've looked through previous posts but none of the potential solutions worked.

Thanks

Quote from: zenrith on August 11, 2015, 11:21:54 AM

Still getting the same issue here. Hashing pretty well but doing no work. So, not actually doing anything well at all.

I16, worksize 32 or 64. 256 worksize gives 100% HW error rate.

Tried on coinotron and verters.

Suggestions? Yes, I am using the latest algorithm and I have my conf file set properly in accordance with changes....

Try using p2pool, I'm pretty sure its working perfectly for most people. There are no fees and you can either run your own node: https://github.com/metalicjames/p2pool-Lyra2RE/releases or use this one: http://p2pool.pl/ simply using your wallet address as a username. You have to use the --no-extranonce flag using sgminer.

Same problem, I'm using the right kernel:

Code:

[12:31:11] Initialising kernel Lyra2REv2.cl with bitalign, unpatched BFI, nfactor 10, n 1024

But I'm just getting "invalid nonce - HW error" my intensity is 8, worksize=32, threads=2

jamesl22

sr. member

Activity: 392

Merit: 250

Quote from: znewsham on August 11, 2015, 11:13:59 AM

Hi all,

I'm stuck getting sgminer to work with the new VTC algo, CPU miner works fine, and sgminer worked fine BEFORE the fork. Now I get a few hardware errors, and no shares whatsoever (not even stale). I've tried two pools (pool.verters.com and coinotron.com).

The hardware error I get is "Invalid Nonce". I've tried with different combinations of worksize and intensity, nothing seems to help.

I'm using 64bit Ubuntu 14.04, with the AMD 15.20 drivers. My graphics cards are a pair of R9 270.

Any thoughts on what could be going wrong? I've looked through previous posts but none of the potential solutions worked.

Thanks

Quote from: zenrith on August 11, 2015, 11:21:54 AM

Still getting the same issue here. Hashing pretty well but doing no work. So, not actually doing anything well at all.

I16, worksize 32 or 64. 256 worksize gives 100% HW error rate.

Tried on coinotron and verters.

Suggestions? Yes, I am using the latest algorithm and I have my conf file set properly in accordance with changes....

Try using p2pool, I'm pretty sure its working perfectly for most people. There are no fees and you can either run your own node: https://github.com/metalicjames/p2pool-Lyra2RE/releases or use this one: http://p2pool.pl/ simply using your wallet address as a username. You have to use the --no-extranonce flag using sgminer.

zenrith

newbie

Activity: 32

Merit: 0

Still getting the same issue here. Hashing pretty well but doing no work. So, not actually doing anything well at all.

I16, worksize 32 or 64. 256 worksize gives 100% HW error rate.

Tried on coinotron and verters.

Suggestions? Yes, I am using the latest algorithm and I have my conf file set properly in accordance with changes....

znewsham

newbie

Activity: 6

Merit: 0

Hi all,

I'm stuck getting sgminer to work with the new VTC algo, CPU miner works fine, and sgminer worked fine BEFORE the fork. Now I get a few hardware errors, and no shares whatsoever (not even stale). I've tried two pools (pool.verters.com and coinotron.com).

The hardware error I get is "Invalid Nonce". I've tried with different combinations of worksize and intensity, nothing seems to help.

I'm using 64bit Ubuntu 14.04, with the AMD 15.20 drivers. My graphics cards are a pair of R9 270.

Any thoughts on what could be going wrong? I've looked through previous posts but none of the potential solutions worked.

Thanks

thefix

legendary

Activity: 1049

Merit: 1001

Quote from: ocminer on August 11, 2015, 09:55:32 AM

Vertcoin changed algo AGAIN ?

Yes, its pretty sweet

http://cryptomining-blog.com/5310-vertcoin-has-hard-forked-to-new-lyra2re-algorithm/

TheCoinFinder

legendary

Activity: 938

Merit: 1001

Quote from: ocminer on August 11, 2015, 09:55:32 AM

Vertcoin changed algo AGAIN ?

Because of ipominer's botnet (well not their botnet, but they seem to work hand in hand with them), and the fact that cpumining was effectively as efficient as GPU mining. The new adjusted algo favours GPUs quite considerably.

coinotron

legendary

Activity: 1182

Merit: 1000

Quote from: pwpwpw on August 11, 2015, 08:18:11 AM

http://pastebin.com/4gNUhXMc config, changed user/pass, user is xxx.1 same as on pool settings

also,
coinotron has about 110confirmed coins, treshold is set to 10 and its not paying out, dont see any cashout options, is the payout laging?

Probably you changed your payout address or threshold and didn't use unlock code send to you by system.
Send your account name to [email protected] I will check out your payouts.

Topic: Vertcoin - 1 | ASIC - 0 | Lyra2RE | Decentralised | GPU Mineable | Open Source - page 72. (Read 415451 times)