Topic: Vertcoin - 1 | ASIC - 0 | Lyra2RE | Decentralised | GPU Mineable | Open Source - page 75. (Read 415451 times)

Try to copy `msvcr110.dll` as well

@anatolikostis with the exact same settings? Well not on my card then

I can't seem to get my miner working using an AMD R9 280X running on Windows 10 Pro 64bit with AMD Catalyst 15.7.1 drivers. I tried copying the amdocl.dll from the 14.4 drivers along with tweaking my old sgminer config to use the new kernel/algo. No luck.

you should have at least 4mh/s

I can confirm that 280x works on catalyst 14.12 when you copy both `amdocl.dll` and `msvcr110.dll` directly to miners folder.

Just used standard 280x settings with g2, w256 and I18 making 3,55Mhash/s
Didnt try to optimize yet.

You don't need the binary from 14.4. I have gigabyte and asus r9 280x cards, one the asus rig I installed 15.7.1, copied the amdocl.dll from the 14.4 driver to the mining folder ( I tried copying the 15.7.1 amdocl.dll and with that it didn't work) and msvcr120.dll to the system64wow/system32 and mining folder too (not sure if that is needed, dont remember why I did it). Setting are same as with older lyra2 but xintensity=500, worksize=256 didnt work for me, intensity=17 and worksize=32 did work both on 14.4 drivers and on 15.7.1 (on my gigabyte rig I didnt install 15.7.1 and it still worked). Also the bin was not needed because my miner .bat did have del *.bin so the bin I'm using was generated with 15.7.1 and not 14.4.

I noticed one thing tho, if in the config file you dont put case sensitive Lyra2REv2 as kernel/algo, then it will compile a ckolivas kernel and you will get an error like, high hash target or something like that and it will give you only HW. even if you rename the kernel .cl file to lowercase, it will still not work, I cant understand why but it doesnt. The WTF ... error comes when you have too high gpu-threads, leave it at 2 or 4 (had no effect for me)

me as well but I have no way to test as it works perfectly on my 290x...(no matter which driver version I use)
actually I also think it is coming from some other part...

Sgminer is giving "high hash" rejects on give me coins pool (ccminer works fine).

OK Vertans

Sorry for my english, im not the best...

My RIG whit 5 R9 280X ASUS DCU2 and Sapphire VaporX works now!
Not so fast, but running @ Low energy and Cool
All Cards by 65° @ 40% Fan Speed!

System:
Windows 8.1 64 bit on SSD
Driver Catalyst 15.7.1 not Beta...

I put the amdocl.dll File from AMD Catalyst 14.4 driver, direct to the Miner folder!

Find here:

C:\AMD\AMD-Catalyst-14.4-64Bit-Win8.1-Win8-Win7-WHQL-Aug\Packages\Drivers\Display\WB6A_INF\B171094\amdocl.dll

For all People that have Problem to Start the Miner! HW Error`s or what else...

Please set gpu-threads to "2" i d`ont now why, but more work not!
Intesity not tooo high, i have testet 17-19, but 19 is Limit!

Here my sgminer conf:

{
  "pools": [
    {
      "url": "stratum+tcp://pool.verters.com:3333",
      "user": "***",
      "pass": "***"
    }
  ],
  "algorithm": "Lyra2REv2",
  "intensity": "19,19,19,19,19",
  "worksize": "256,256,256,256,256",
  "gpu-threads": "2,2,2,2,2",
  "gpu-engine" : "850,850,850,850,850",
  "gpu-memclock" : "1500,1500,1500,1500,1500",
  "gpu-powertune" : "-30,-30,-30,-30,-30",
  "temp-cutoff": "95,95,95,95,95",
  "temp-overheat": "85,85,85,85,85",
  "temp-target": "66,66,66,66,66",
  "gpu-fan" : "0-80,0-80,0-80,0-80,0-80",
  "auto-fan" : true,
  "shares": "0",
  "api-mcast-port": "4028",
  "api-port": "4028",
  "expiry": "30",
  "gpu-dyninterval": "7",
  "log": "5",
  "queue": "1",
  "scan-time": "7",
  "tcp-keepalive": "30",
  "temp-hysteresis": "3",
  "failover-only": true,
  "no-pool-disable": true,
  "failover-switch-delay": "60",
  "kernel-path": "/usr/local/bin"
}

I hope that help you

Greez Don

Please donate!
VTC Adress: Vdz6qUszDNDMXaCbRUfPDT9fKuWr8Z5aY7

Vertcoin Difficulty Chart    UP UP -> 148

http://www.coinwarz.com/cryptocurrency/coins/vertcoin

Can anyone please share 280x bin from 14.4?

Ok, I have put the mask back to its original setting on verters - and upped the minimum difficulty to 0.4

anyone uses temp-cutoff ? I cant make it to work, tried with auto-gpu / auto-fan, without, but nothing, both cutoff and overheat don't do anything.
I can confirm, coinotron is getting 100% accepted shares

Try another pool with your miner, if share above target happens that would be consistent for all the share, not 50%, at least that's what I had when changing the setting of sgminer.

The same here. I switched to Coinotron until Verters sort out their problems.

Anyone else having 50%+ rejected "share above target" on verters? Should I switch to another miner or something? I didn't have any problems until like half an hour ago 

actually I think they are making adjustment on verter, I had the same problem a few minutes ago with ccminer and getting now half of my nominal hashrate (worked all day long and was ok until now...)
also vardiff hasn't been working well on verters

did you produced bin with 14.4 catalyst drivers ?
what card are you using ?

Could be a problem with difficulty, I still use the same diff as the old lyra2re

edit: min diff on verter is also too small

djm34, try it => only HW.

I changed these settings and it started to work, on verters pool, but after like 10minutes, share above target, 50%+ rejects, is this a pool error or it comes from me? Also, the new miner doesnt have temp-cutoff ? I have it set to 90 but it went up to 98 before I stopped it.