All sorted, thanks.
Here to hoping these coins will be worth a lot as its hard to get many of them
Topic: ✪✪✪ VIRTUAL COIN ✪✪✪ | P2P VIRTUAL MONEY | VC | X11 | ReLaunch: Date Feb 2017 ✪✪ - page 117. (Read 192548 times)
April 13, 2014, 03:32:48 AM
April 13, 2014, 03:25:43 AM
does the config file go in the virtualcoin folder in appdata roaming?
April 13, 2014, 03:20:56 AM
can you please try again.
Also no need to add any nodes, sync issue has been resolved.
Please test it & reply back if you still have issues. Allow 1-3 mins to sync after you run it first time.
[/size]
Code:
https://mega.co.nz/#!SQYx3JjC!L2imw2BPG0zfQ7xprv4i8PiMzgfINrweojZmLY1xFxg
Also no need to add any nodes, sync issue has been resolved.
Please test it & reply back if you still have issues. Allow 1-3 mins to sync after you run it first time.
[/size]
Been a while now, you can see the nodes ive added in my post above...
Try adding this node
182.91.6.14
Make sure you have removed any beta version & old virtualcoin folder before you run new file. Try downloading the above file again, just did a test on new PC, took 30 secs to sync.
Have only ever had the launch version of the wallet, that new node gave me a connection for 2 seconds then dropped out
Try this, remove old exe file.
download from above link again.
rename old "virtualcoin" folder & then run the new file & allow 5 mins to sync, otherwise add node, then close & open the program again.
April 13, 2014, 03:14:44 AM
POOL added.
April 13, 2014, 03:12:38 AM
can you please try again.
Also no need to add any nodes, sync issue has been resolved.
Please test it & reply back if you still have issues. Allow 1-3 mins to sync after you run it first time.
[/size]
Code:
https://mega.co.nz/#!SQYx3JjC!L2imw2BPG0zfQ7xprv4i8PiMzgfINrweojZmLY1xFxg
Also no need to add any nodes, sync issue has been resolved.
Please test it & reply back if you still have issues. Allow 1-3 mins to sync after you run it first time.
[/size]
Been a while now, you can see the nodes ive added in my post above...
Try adding this node
182.91.6.14
Make sure you have removed any beta version & old virtualcoin folder before you run new file. Try downloading the above file again, just did a test on new PC, took 30 secs to sync.
Have only ever had the launch version of the wallet, that new node gave me a connection for 2 seconds then dropped out
April 13, 2014, 03:11:22 AM
No exchanges yet?
AGX Exchange is been tested, expect it to be live for trade within 24hrs.
April 13, 2014, 03:07:25 AM
can you please try again.
Also no need to add any nodes, sync issue has been resolved.
Please test it & reply back if you still have issues. Allow 1-3 mins to sync after you run it first time.
[/size]
Code:
https://mega.co.nz/#!SQYx3JjC!L2imw2BPG0zfQ7xprv4i8PiMzgfINrweojZmLY1xFxg
Also no need to add any nodes, sync issue has been resolved.
Please test it & reply back if you still have issues. Allow 1-3 mins to sync after you run it first time.
[/size]
Been a while now, you can see the nodes ive added in my post above...
Try adding this node
182.91.6.14
Make sure you have removed any beta version & old virtualcoin folder before you run new file. Try downloading the above file again, just did a test on new PC, took 30 secs to sync.
April 13, 2014, 03:01:30 AM
can you please try again.
Also no need to add any nodes, sync issue has been resolved.
Please test it & reply back if you still have issues. Allow 1-3 mins to sync after you run it first time.
[/size]
Code:
https://mega.co.nz/#!SQYx3JjC!L2imw2BPG0zfQ7xprv4i8PiMzgfINrweojZmLY1xFxg
Also no need to add any nodes, sync issue has been resolved.
Please test it & reply back if you still have issues. Allow 1-3 mins to sync after you run it first time.
[/size]
Been a while now, you can see the nodes ive added in my post above...
April 13, 2014, 02:59:45 AM
No exchanges yet?
April 13, 2014, 02:54:13 AM
can you please try again.
Also no need to add any nodes, sync issue has been resolved.
Please test it & reply back if you still have issues. Allow 1-3 mins to sync after you run it first time.
[/size]
Code:
https://mega.co.nz/#!SQYx3JjC!L2imw2BPG0zfQ7xprv4i8PiMzgfINrweojZmLY1xFxg
Also no need to add any nodes, sync issue has been resolved.
Please test it & reply back if you still have issues. Allow 1-3 mins to sync after you run it first time.
[/size]
April 13, 2014, 02:53:56 AM
Hey guys,
Need some help, get get my wallet to connect, here is my .conf details:
testnet=0
listen=1
server=1
daemon=1
rpcuser=vcoinrpc
rpcpassword=myrandompassword
addnode=virtualcoin.hopto.org
addnode=195.154.215.74
addnode=54.81.141.1
addnode=37.187.200.117
addnode=58.7.134.2
addnode=99.225.240.68
addnode=174.95.71.30
addnode=173.74.122.155
addnode=89.173.203.81
addnode=62.249.146.165
addnode=62.210.141.204
addnode=62.249.146.165
addnode=195.154.215.74
gen=1
genproclimit=2
rcpallowip=127.0.0.1
rpcport=20950
port=2095
where am I going wrong?
Thanks,
Laughyboy
Need some help, get get my wallet to connect, here is my .conf details:
testnet=0
listen=1
server=1
daemon=1
rpcuser=vcoinrpc
rpcpassword=myrandompassword
addnode=virtualcoin.hopto.org
addnode=195.154.215.74
addnode=54.81.141.1
addnode=37.187.200.117
addnode=58.7.134.2
addnode=99.225.240.68
addnode=174.95.71.30
addnode=173.74.122.155
addnode=89.173.203.81
addnode=62.249.146.165
addnode=62.210.141.204
addnode=62.249.146.165
addnode=195.154.215.74
gen=1
genproclimit=2
rcpallowip=127.0.0.1
rpcport=20950
port=2095
where am I going wrong?
Thanks,
Laughyboy
Finally got the wallet downloaded again but no sync, can some take 2 minutes to help me with this....
April 13, 2014, 02:53:27 AM
April 13, 2014, 02:49:56 AM
Update:-
Please use SPH-MINER from (https://bitcointalk.org/index.php?topic=475795.0;all)
The reason their was issue in the original Windows client sync was error in the code, causing it to randomly award blocks, it had some beta test code still left.
Please disregard the wallet.dat file included, it was meant was beta testing. Please DO NOT USE this wallet.dat file on live system.
Follow these steps...
delete old virtualcoin.exe file.
delete virtualcoin folder from roaming.
LOCATION OF THE FOLDER...
C:\Documents and Settings\[windows username]\Application data\Virtualcoin (XP)
C:\Users\[windows username]\Appdata\Roaming\Virtualcoin (Vista and 7)
Now run the new virtualcoin file.
Wait for it to sync (takes about 1-2 mins)
Will add new pools, as well go along.
Please use SPH-MINER from (https://bitcointalk.org/index.php?topic=475795.0;all)
The reason their was issue in the original Windows client sync was error in the code, causing it to randomly award blocks, it had some beta test code still left.
Please disregard the wallet.dat file included, it was meant was beta testing. Please DO NOT USE this wallet.dat file on live system.
Follow these steps...
delete old virtualcoin.exe file.
delete virtualcoin folder from roaming.
LOCATION OF THE FOLDER...
C:\Documents and Settings\[windows username]\Application data\Virtualcoin (XP)
C:\Users\[windows username]\Appdata\Roaming\Virtualcoin (Vista and 7)
Now run the new virtualcoin file.
Wait for it to sync (takes about 1-2 mins)
Will add new pools, as well go along.
download link for windows wallet doesn't work... ive been unable to get mine to sync and have had no help from yourself or the users here after many posts. Ive deleted the roaming folder and want to replace the wallet but cant download it....
April 13, 2014, 12:03:40 AM
Holy shit, why is this coin network hashrate passed 800MH, it's not even 24hrs since launch & so many users already mining it. I can't recall any coin getting that popular in the past, coin is on fire lol.
It's time that this coin also gets listed on btc-e and Vircurex as well.
why their is so much buzz???
It's time that this coin also gets listed on btc-e and Vircurex as well.
why their is so much buzz???
lol it's x11 nub, 800mh/s is nothing, barely 400 miners if u take 2 Mh/s average per gpu
April 12, 2014, 11:34:00 PM
Holy shit, why is this coin network hashrate passed 800MH, it's not even 24hrs since launch & so many users already mining it. I can't recall any coin getting that popular in the past, coin is on fire lol.
It's time that this coin also gets listed on btc-e and Vircurex as well.
why their is so much buzz???
It's time that this coin also gets listed on btc-e and Vircurex as well.
why their is so much buzz???
I am also mining since yesterday, holds very promising future. I like the support for QR CODE in Windows Client.
How do we use that feature?
April 12, 2014, 11:22:41 PM
Holy shit, why is this coin network hashrate passed 800MH, it's not even 24hrs since launch & so many users already mining it. I can't recall any coin getting that popular in the past, coin is on fire lol.
It's time that this coin also gets listed on btc-e and Vircurex as well.
why their is so much buzz???
It's time that this coin also gets listed on btc-e and Vircurex as well.
why their is so much buzz???
I am also mining since yesterday, holds very promising future. I like the support for QR CODE in Windows Client.
How do we use that feature?
April 12, 2014, 10:42:22 PM
Holy shit, why is this coin network hashrate passed 800MH, it's not even 24hrs since launch & so many users already mining it. I can't recall any coin getting that popular in the past, coin is on fire lol.
It's time that this coin also gets listed on btc-e and Vircurex as well.
why their is so much buzz???
It's time that this coin also gets listed on btc-e and Vircurex as well.
why their is so much buzz???
April 12, 2014, 07:50:21 PM
VirtualCoin Exchange Update
Got an update from AGX exchange, they are in the process of enabling VC/BTC trading, please wait for further update before depositing your VC coins.
April 12, 2014, 07:42:21 PM
Something seems to be wrong with this coin.
April 12, 2014, 06:48:41 PM
Trying to figure out what you are going for here, but to start...
Any feedback, suggestions are welcome
Code:
if(nHeight >= 1000) {
if((nHeight >= 101 && dDiff > 75) || nHeight >= 1000) { ///wouldn't this always evaluate to true because of the line above it?
// 222000/(((x+2600)/9)^2)
nSubsidy = (222000.0 / (pow((dDiff+2600.0)/9.0,2.0)));
if (nSubsidy > 25) nSubsidy = 25;
if (nSubsidy < 5) nSubsidy = 5;
} else {
nSubsidy = (1112.0 / (pow((dDiff+51.0)/6.0,2.0)));
if (nSubsidy > 500) nSubsidy = 50;
if (nSubsidy < 25) nSubsidy = 5;
}
} else {
nSubsidy = (1111.0 / (pow((dDiff+1.0),2.0)));
if (nSubsidy > 500) nSubsidy = 50;
if (nSubsidy < 1) nSubsidy = 1;
}Any feedback, suggestions are welcome
it would be something like...
Code:
if(nHeight >= 1000)
{
nSubsidy = (222000.0 / (pow((dDiff+2600.0)/9.0,2.0)));
if (nSubsidy > 25) nSubsidy = 250; // increase from 25 to 250 per block
if (nSubsidy < 5) nSubsidy = 50; // increase from 5 to 50 per block
}
else {
nSubsidy = (1112.0 / (pow((dDiff+51.0)/6.0,2.0)));
if (nSubsidy > 500) nSubsidy = 50;
if (nSubsidy < 25) nSubsidy = 5;
}
}
Jump to: