WildRig Multi 0.35.1 beta 2 multi-algo miner for AMD & NVIDIA - page 38.

Biggums

newbie

Activity: 45

Merit: 0

Quote from: Biggums on March 16, 2019, 04:20:32 PM

You are the best! Grin

OK dev...

I'll take any optimizations you have got for my RX Vega cards....
Just talked to my buddy getting 75Mh pool side with 3x 1080ti's

I can't believe that his 3x 1080ti's are hasing almost what my 9x vegas are. Huh

Biggums

newbie

Activity: 45

Merit: 0

You are the best! Grin

andrucrypt

member

Activity: 720

Merit: 49

Quote from: Biggums on March 14, 2019, 07:01:50 PM

Quote from: andrucrypt on March 14, 2019, 01:56:08 AM

Quote from: Biggums on March 13, 2019, 09:16:09 PM

Hi dev,

Thanks again for a great miner. I have been using wildrig since version 12.0 for my RX Vega rig to mine x16 algos and HEX

I am currently mining hex and the miner is reporting over 10Mh per card at all times, highest is ~15Mh. However, pool side I am averaging less than 10Mh. Any suggestions on improving pool side performance?

My current config is

Code:

--algo hex --opencl-platform=1 --opencl-threads 2 --opencl-launch=23x0 --strategy=1 --multiple-instance --url

I have tried 22x64 22x128 22x256 and 23x64 23x128 23x256

I seem to get similar results over time with all different intensities and worksizes

Thanks,
B

Hi, what pool are you using? Also what clocks of Vega do you get in dynamic?

I have vega56 cards at 1408 & vega64's 1504
I have tried 3 pools now for hex algo gpuhash, the cryptominerpool, and thepoollife
I usually let it run for 4-6 hours before even trying to judge pools side performance

Damn, looks like found a problem... As a solution add parameter --diff-factor 128. Will fix this in next release.

UPDATE: started here my own test on zergpool for hex-algo, hashrate is pretty stable without --diff-factor 128 and around that values I have in miner, so maybe your problem with something else.

andrucrypt

member

Activity: 720

Merit: 49

Quote from: pinky1234 on March 15, 2019, 01:02:21 PM

Am getting 20-30 sol/s on beam with WildRig its this is normal! using one AMD RADEON VII

lol

pinky1234

full member

Activity: 375

Merit: 124

Am getting 20-30 sol/s on beam with WildRig its this is normal! using one AMD RADEON VII

grenwolde

newbie

Activity: 22

Merit: 0

Really nice job on the rainforest algo -- used auto on rig with 480/570/580 8gb working wonderfully. Oc'd on core left mem at stock and power alone.

Biggums

newbie

Activity: 45

Merit: 0

Quote from: andrucrypt on March 14, 2019, 01:56:08 AM

Quote from: Biggums on March 13, 2019, 09:16:09 PM

Hi dev,

Thanks again for a great miner. I have been using wildrig since version 12.0 for my RX Vega rig to mine x16 algos and HEX

I am currently mining hex and the miner is reporting over 10Mh per card at all times, highest is ~15Mh. However, pool side I am averaging less than 10Mh. Any suggestions on improving pool side performance?

My current config is

Code:

--algo hex --opencl-platform=1 --opencl-threads 2 --opencl-launch=23x0 --strategy=1 --multiple-instance --url

I have tried 22x64 22x128 22x256 and 23x64 23x128 23x256

I seem to get similar results over time with all different intensities and worksizes

Thanks,
B

Hi, what pool are you using? Also what clocks of Vega do you get in dynamic?

I have vega56 cards at 1408 & vega64's 1504
I have tried 3 pools now for hex algo gpuhash, the cryptominerpool, and thepoollife
I usually let it run for 4-6 hours before even trying to judge pools side performance

andrucrypt

member

Activity: 720

Merit: 49

Quote from: WhyMe on March 14, 2019, 01:05:30 PM

Quote from: andrucrypt on March 14, 2019, 10:28:24 AM

Looks like some private pool appeared... so I improved miner again to resist it %)
0.15.4 preview 7, special x2 boost for rainforest algo
Download

Why this version is catched by Windows antivirus ? That never happened with previous versions I've used

Program:Win32/Unwaders.C!ml

Because AntiViruses don't like miners at all, and with every update of miner or AntiVirus - thing changes. Anyway, latest version(preview 7) is most clean: VirusTotal 3 / 71, but I don't care.

WhyMe

sr. member

Activity: 661

Merit: 250

Quote from: andrucrypt on March 14, 2019, 10:28:24 AM

Looks like some private pool appeared... so I improved miner again to resist it %)
0.15.4 preview 7, special x2 boost for rainforest algo
Download

Why this version is catched by Windows antivirus ? That never happened with previous versions I've used

Program:Win32/Unwaders.C!ml

Azzgard1980

newbie

Activity: 15

Merit: 0

Quote from: justoiurii on March 14, 2019, 07:54:45 AM

Quote from: andrucrypt on March 14, 2019, 01:57:40 AM

0.15.4 preview 6, special for rainforest algo
- less power consumption
- no more "wrong share"
- slightly higher hashrate
Download

Thanks, Master.
What afterburner overclock would you recommend for RX 480 8 G bc drivers? Now I set 1130/2100

i use rx 588 and rx 578 - 1230/1750, Memory dont up hs

andrucrypt

member

Activity: 720

Merit: 49

Looks like some private pool appeared... so I improved miner again to resist it %)
0.15.4 preview 7, special x2 boost for rainforest algo
Download

justoiurii

newbie

Activity: 103

Merit: 0

Quote from: andrucrypt on March 14, 2019, 01:57:40 AM

0.15.4 preview 6, special for rainforest algo
- less power consumption
- no more "wrong share"
- slightly higher hashrate
Download

Thanks, Master.
What afterburner overclock would you recommend for RX 480 8 G bc drivers? Now I set 1130/2100

nordmann666

member

Activity: 363

Merit: 16

Quote from: andrucrypt on March 14, 2019, 01:57:40 AM

0.15.4 preview 6, special for rainforest algo
- less power consumption
- no more "wrong share"
- slightly higher hashrate
Download

Rainforest
6x Vega 1440\865
down from 1200W to 950W

awesome work

andrucrypt

member

Activity: 720

Merit: 49

0.15.4 preview 6, special for rainforest algo
- less power consumption
- no more "wrong share"
- slightly higher hashrate
Download

andrucrypt

member

Activity: 720

Merit: 49

Quote from: Biggums on March 13, 2019, 09:16:09 PM

Hi dev,

Thanks again for a great miner. I have been using wildrig since version 12.0 for my RX Vega rig to mine x16 algos and HEX

I am currently mining hex and the miner is reporting over 10Mh per card at all times, highest is ~15Mh. However, pool side I am averaging less than 10Mh. Any suggestions on improving pool side performance?

My current config is

Code:

--algo hex --opencl-platform=1 --opencl-threads 2 --opencl-launch=23x0 --strategy=1 --multiple-instance --url

I have tried 22x64 22x128 22x256 and 23x64 23x128 23x256

I seem to get similar results over time with all different intensities and worksizes

Thanks,
B

Hi, what pool are you using? Also what clocks of Vega do you get in dynamic?

john1010

hero member

Activity: 2100

Merit: 562

The dev of this miner brings all the miners a big help, it's easy to use and the updates is regular to add more features and specially, to improve the performance of the miner in the new algo, kudos the the team!

Biggums

newbie

Activity: 45

Merit: 0

Hi dev,

Thanks again for a great miner. I have been using wildrig since version 12.0 for my RX Vega rig to mine x16 algos and HEX

I am currently mining hex and the miner is reporting over 10Mh per card at all times, highest is ~15Mh. However, pool side I am averaging less than 10Mh. Any suggestions on improving pool side performance?

My current config is

Code:

--algo hex --opencl-platform=1 --opencl-threads 2 --opencl-launch=23x0 --strategy=1 --multiple-instance --url

I have tried 22x64 22x128 22x256 and 23x64 23x128 23x256

I seem to get similar results over time with all different intensities and worksizes

Thanks,
B

andrucrypt

member

Activity: 720

Merit: 49

Quote from: melloyellow on March 12, 2019, 05:44:20 PM

I just noticed you have this on the 1st post

Quote

NOTE: Update in progress. XFX R9 290X benchmark done with new auto parameters from next release.

It has been a while since I checked the first post, has this released already happened or is it going to be a future release like 15.3.9 or 15.4

Thank you for continuing to support GCN2.

You can use 0.15.4 preview versions. Currently I'm working on rainforest there, but all other changes are included.

melloyellow

full member

Activity: 176

Merit: 100

I just noticed you have this on the 1st post

Quote

NOTE: Update in progress. XFX R9 290X benchmark done with new auto parameters from next release.

It has been a while since I checked the first post, has this released already happened or is it going to be a future release like 15.3.9 or 15.4

Thank you for continuing to support GCN2.

andrucrypt

member

Activity: 720

Merit: 49

Quote from: rdbase on March 12, 2019, 12:37:55 PM

Quote from: pepsykolya on March 12, 2019, 09:09:12 AM

MTP algo supported?

Was wondering about this too.
Looking for any information for how to mine on amd cards using this algorithm.

No, dropped it time ago, and have no time to improve.

Topic: WildRig Multi 0.35.1 beta 2 multi-algo miner for AMD & NVIDIA - page 38. (Read 92082 times)