Pages:
Author

Topic: WildRig Multi 0.35.1 beta 2 multi-algo miner for AMD & NVIDIA - page 4. (Read 92264 times)

member
Activity: 724
Merit: 49
It was the SSL issue. Wrong port.
Interesting how it didn't give me a connection error, just kept saying N/A.
cpuminer would say it can't connect:

 stratum_recv_line failed
 ...retry after 15 seconds

Strange, after some time it should print timeout, but probably need to fix something.
member
Activity: 761
Merit: 15
It was the SSL issue. Wrong port.
Interesting how it didn't give me a connection error, just kept saying N/A.
cpuminer would say it can't connect:

 stratum_recv_line failed
 ...retry after 15 seconds
member
Activity: 724
Merit: 49
Hello.
Long time listener, first time caller...

Mining Ghostrider with 3060ti in windows and P2000 in linux still gets n/a for hashrate. I tried --opencl-launch 256 (and 512, 348, 128...) and still no luck.
Any thoughts?

Windows nVidia driver: 536.23

I did notice that in an older version, the 'cu:76' was higher than the current 'cu:38'. Is it calculating something differently?
I guess you use wrong port for pool, e.g. SSL one instead of non-SSL or vice versa. If you use SSL one, don't forget to use prefix stratum+tcps://, if non-SSL - just stratum+tcp:// or no preix at all. Also if you use newest version on 3060Ti, use additional parameter --opencl-launch 1024. For some reason without it you will get a lot of rejects(even they don't harm the real hashrate, but anyway).
member
Activity: 761
Merit: 15
Hello.
Long time listener, first time caller...

Mining Ghostrider with 3060ti in windows and P2000 in linux still gets n/a for hashrate. I tried --opencl-launch 256 (and 512, 348, 128...) and still no luck.
Any thoughts?

Windows nVidia driver: 536.23

I did notice that in an older version, the 'cu:76' was higher than the current 'cu:38'. Is it calculating something differently?
member
Activity: 724
Merit: 49
Hello, how can i select only specific gpu from rig to mine on wildrig, what is config argument (HiveOS)?
default parameter for almost any miner outhere: -d 0,1,2
newbie
Activity: 1
Merit: 0
Hello, how can i select only specific gpu from rig to mine on wildrig, what is config argument (HiveOS)?
member
Activity: 724
Merit: 49
Hello! On RX 6800 on skydoge, the low Hashrate is 4 Mh/s. Overclock settings with hashrate.no.
Hi, I guess you are using HiveOS? In this case you need latest drivers, e.g. 22.20.
newbie
Activity: 1
Merit: 0
Hello! On RX 6800 on skydoge, the low Hashrate is 4 Mh/s. Overclock settings with hashrate.no.
member
Activity: 724
Merit: 49
WildRig Multi 0.36.10
- improved memehashv2 on NVIDIA  gpu's and AMD Polaris/Vega gpu's
- fixed low hashrate of memehashv2 on AMD RDNA gpu's
member
Activity: 724
Merit: 49
Hello wher i can find --opencl-launch for memehash/memehashv2 ?
in most cases value 23 will be fine, maximum is 24 or 25, so just experiment a bit Smiley
newbie
Activity: 13
Merit: 0
Hello wher i can find --opencl-launch for memehash/memehashv2 ?
member
Activity: 223
Merit: 12
You can see my test on RTX 4090 - Skydoge Hashrate & Profit (WildRig 0.36.6b) - https://www.youtube.com/watch?v=eaoA56e9Bg8
newbie
Activity: 4
Merit: 0
how to lockcore lockmem on SMOS
jr. member
Activity: 53
Merit: 2
Hi, can WildRig be used for dual mining?

I doesn't found ".bat" file for dual mining, by example RVN+ZIL.

Thank's for help.
member
Activity: 724
Merit: 49
Дзякyй бpaцeнiк. Клacны мaйнep, пaвecялiў! putin khuylo ! 👍🇺🇦🤍♥️🤍
дзякyй зa вoдгyк Smiley

Hello, I get this error while mining kawpow with GTX 1080 and GTX 950:

Error CL_OUT_OF_RESOURCES when calling clBuildProgram
RaveOS? If so, you need to rollback drivers to some previous version, or update to latest one. They broek them at some point and fixed later.
newbie
Activity: 14
Merit: 0
Hello, I get this error while mining kawpow with GTX 1080 and GTX 950:

Error CL_OUT_OF_RESOURCES when calling clBuildProgram
newbie
Activity: 9
Merit: 0
Дзякyй бpaцeнiк. Клacны мaйнep, пaвecялiў! putin khuylo ! 👍🇺🇦🤍♥️🤍
member
Activity: 223
Merit: 12
Is there a exe file for this miner? I have setup everything right however the bat file doesnt work without an exe file unless I am missing something?

Disable antivirus software.
newbie
Activity: 14
Merit: 0
Is there a exe file for this miner? I have setup everything right however the bat file doesnt work without an exe file unless I am missing something?
sr. member
Activity: 1419
Merit: 275
Community built, Privacy driven
Nice to have WildRig support Pandanite project. We are glad to have your miner, more people can easily mine PDN
Pages:
Jump to: