Pages:
Author

Topic: WildRig Multi 0.35.1 beta 2 multi-algo miner for AMD & NVIDIA - page 47. (Read 92020 times)

member
Activity: 473
Merit: 18
Can you add SHA256t?
Still can be pretty profitable (especially if you can pull over 500Mh/s on a rx580, which is the best miner I found does)
member
Activity: 720
Merit: 49
Well, Mr Andrucrypt, you've got work to do again since the release of CryptoDredge... There's approx 100% performance to be gained to be about on par with Pascal cards (at least for Vegas that is)... Come on, enough xmas turkey for you, get back to work! Grin
No more plans for MTP this year Smiley Probably only fee lowering to default scheme and release with x16rt support.
hero member
Activity: 1274
Merit: 556
Well, Mr Andrucrypt, you've got work to do again since the release of CryptoDredge... There's approx 100% performance to be gained to be about on par with Pascal cards (at least for Vegas that is)... Come on, enough xmas turkey for you, get back to work! Grin
newbie
Activity: 18
Merit: 0
"Version with MTP algo support for ZCoin is here" > WildRig Multi 0.15.0.7 mtp 3% donation!!!
full member
Activity: 180
Merit: 100
I understand that only mtp works.
As I was with What error do you get? I was just writing the details.
Sorry for inconvenience caused by lack of understanding.
Oh, now I see ) That question about error was for another user Smiley

How to work in Hawaii Huh
Donwload kernel-hawaii-mtp.7z file and put *.bin file from it into same folder where wildrig.exe.
Thank you Smiley
member
Activity: 720
Merit: 49
I understand that only mtp works.
As I was with What error do you get? I was just writing the details.
Sorry for inconvenience caused by lack of understanding.
Oh, now I see ) That question about error was for another user Smiley

How to work in Hawaii Huh
Donwload kernel-hawaii-mtp.7z file and put *.bin file from it into same folder where wildrig.exe.
full member
Activity: 180
Merit: 100
How to work in Hawaii Huh
newbie
Activity: 42
Merit: 0
Hi, Master. Unfortunately, I can't start new ver. with  --max-difficulty parameter(
What error do you get?
@kokodesu this version for mtp algo only, everything else not tested.

It remains hardened or hangs. The message when you hang is as follows.

* VERSIONS:     WildRig/0.15.0.7 beta libuv/1.21.0 OpenCL/2.0 MSVC/2015
 * CPU:                  Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz x64 AES-NI
 * ALGO:         lyra2vc0ban
 * POOL #1:      asia.bsod.pw:2514
 * COMMANDS:     hashrate, pause, resume
[18:47:25] donation: 2%
[18:47:25] strategy: 0
[18:47:25] send-stale: no
[18:47:25] watchdog: enabled
[18:47:25] good-risers: default
[18:47:25] compiling code and initializing GPUs. This will take a while...
[18:47:25] GPU #0 [BusID: #3] [Ellesmere] Radeon RX 580 Series
[18:47:25] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:25] GPU #1 [BusID: #4] [Ellesmere] Radeon RX 580 Series
[18:47:25] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:26] GPU #2 [BusID: #5] [Ellesmere] Radeon RX 580 Series
[18:47:26] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:26] GPU #3 [BusID: #6] [Ellesmere] Radeon RX 580 Series
[18:47:26] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:26] GPU #5 [BusID: #11] [Ellesmere] Radeon RX 580 Series
[18:47:26] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:32] use pool asia.bsod.pw:2514 139.99.116.172
[18:47:32] Stratum set difficulty to 128.0000
[18:47:32] new job from asia.bsod.pw:2514 diff 2.15G
[18:47:44] Stratum set difficulty to 64.0000
[18:47:44] new job from asia.bsod.pw:2514 diff 1.07G
[18:48:02] GPU #0: hangs in OpenCL kernel for more than 30 seconds, exit
Again, why do you use version 0.15 for algo that's not MTP? I wrote that this version ONLY FOR MTP ALGO

I understand that only mtp works.
As I was with What error do you get? I was just writing the details.
Sorry for inconvenience caused by lack of understanding.
member
Activity: 720
Merit: 49
Hi, Master. Unfortunately, I can't start new ver. with  --max-difficulty parameter(
What error do you get?
@kokodesu this version for mtp algo only, everything else not tested.

It remains hardened or hangs. The message when you hang is as follows.

* VERSIONS:     WildRig/0.15.0.7 beta libuv/1.21.0 OpenCL/2.0 MSVC/2015
 * CPU:                  Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz x64 AES-NI
 * ALGO:         lyra2vc0ban
 * POOL #1:      asia.bsod.pw:2514
 * COMMANDS:     hashrate, pause, resume
[18:47:25] donation: 2%
[18:47:25] strategy: 0
[18:47:25] send-stale: no
[18:47:25] watchdog: enabled
[18:47:25] good-risers: default
[18:47:25] compiling code and initializing GPUs. This will take a while...
[18:47:25] GPU #0 [BusID: #3] [Ellesmere] Radeon RX 580 Series
[18:47:25] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:25] GPU #1 [BusID: #4] [Ellesmere] Radeon RX 580 Series
[18:47:25] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:26] GPU #2 [BusID: #5] [Ellesmere] Radeon RX 580 Series
[18:47:26] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:26] GPU #3 [BusID: #6] [Ellesmere] Radeon RX 580 Series
[18:47:26] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:26] GPU #5 [BusID: #11] [Ellesmere] Radeon RX 580 Series
[18:47:26] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:32] use pool asia.bsod.pw:2514 139.99.116.172
[18:47:32] Stratum set difficulty to 128.0000
[18:47:32] new job from asia.bsod.pw:2514 diff 2.15G
[18:47:44] Stratum set difficulty to 64.0000
[18:47:44] new job from asia.bsod.pw:2514 diff 1.07G
[18:48:02] GPU #0: hangs in OpenCL kernel for more than 30 seconds, exit
Again, why do you use version 0.15 for algo that's not MTP? I wrote that this version ONLY FOR MTP ALGO
newbie
Activity: 42
Merit: 0
Hi, Master. Unfortunately, I can't start new ver. with  --max-difficulty parameter(
What error do you get?
@kokodesu this version for mtp algo only, everything else not tested.

It remains hardened or hangs. The message when you hang is as follows.

* VERSIONS:     WildRig/0.15.0.7 beta libuv/1.21.0 OpenCL/2.0 MSVC/2015
 * CPU:                  Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz x64 AES-NI
 * ALGO:         lyra2vc0ban
 * POOL #1:      asia.bsod.pw:2514
 * COMMANDS:     hashrate, pause, resume
[18:47:25] donation: 2%
[18:47:25] strategy: 0
[18:47:25] send-stale: no
[18:47:25] watchdog: enabled
[18:47:25] good-risers: default
[18:47:25] compiling code and initializing GPUs. This will take a while...
[18:47:25] GPU #0 [BusID: #3] [Ellesmere] Radeon RX 580 Series
[18:47:25] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:25] GPU #1 [BusID: #4] [Ellesmere] Radeon RX 580 Series
[18:47:25] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:26] GPU #2 [BusID: #5] [Ellesmere] Radeon RX 580 Series
[18:47:26] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:26] GPU #3 [BusID: #6] [Ellesmere] Radeon RX 580 Series
[18:47:26] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:26] GPU #5 [BusID: #11] [Ellesmere] Radeon RX 580 Series
[18:47:26] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:32] use pool asia.bsod.pw:2514 139.99.116.172
[18:47:32] Stratum set difficulty to 128.0000
[18:47:32] new job from asia.bsod.pw:2514 diff 2.15G
[18:47:44] Stratum set difficulty to 64.0000
[18:47:44] new job from asia.bsod.pw:2514 diff 1.07G
[18:48:02] GPU #0: hangs in OpenCL kernel for more than 30 seconds, exit
newbie
Activity: 103
Merit: 0
Hi, Master. Unfortunately, I can't start new ver. with  --max-difficulty parameter(
What error do you get?


no error: just can't start. Now I'm mining without it. Thanks for reducing.....)
member
Activity: 720
Merit: 49
Hi, Master. Unfortunately, I can't start new ver. with  --max-difficulty parameter(
What error do you get?

@kokodesu this version for mtp algo only, everything else not tested.
newbie
Activity: 103
Merit: 0
Hi, Master. Unfortunately, I can't start new ver. with  --max-difficulty parameter(
newbie
Activity: 42
Merit: 0
Currently, I am mining mtp and lyra2c0ban with 1PC (mtp: RX580x8Gx1, lyra2c0ban: RX570x4Gx5), 0.15.0.7 opencl error will occur when mining lyra2c0ban.
Does this version move only mtp? Since I get an error for the time being, lyra2c0ban is moving at 0.14.0.
member
Activity: 720
Merit: 49
any tips on how to use getwork and mine direct to wallet with wildrig ?

tried that using coinbase as user



wildrig_avx.exe --algo mtp --opencl-threads 1 --opencl-launch 16x0 --url http://192.168.0.15:8382 --user a8rGMA67WQ2DkTU6XYtsgjjFzSxKBFP7B6

this works for ccminer

ccminer.exe -a mtp -o http://192.168.0.15:8382 -u zcoin -p x --no-getwork --coinbase-addr a8rGMA67WQ2DkTU6XYtsgjjFzSxKBFP7B6

SOLO mining not supported.
member
Activity: 720
Merit: 49
0.15.0.7, changelog included.
newbie
Activity: 27
Merit: 0
Mtp hasrate 580?
member
Activity: 418
Merit: 21
0.15.0.5 and .6 both have the 5% fee bug, which cant be changed.

If you start 0.15.0.6, the miner prints tons of these lines:
Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for Kernel 'search'

But after a while it will mine. These lines only follow after the miner window starts.
hero member
Activity: 1274
Merit: 556
any tips on how to use getwork and mine direct to wallet with wildrig ?

tried that using coinbase as user



wildrig_avx.exe --algo mtp --opencl-threads 1 --opencl-launch 16x0 --url http://192.168.0.15:8382 --user a8rGMA67WQ2DkTU6XYtsgjjFzSxKBFP7B6

this works for ccminer

ccminer.exe -a mtp -o http://192.168.0.15:8382 -u zcoin -p x --no-getwork --coinbase-addr a8rGMA67WQ2DkTU6XYtsgjjFzSxKBFP7B6

Think you could get your pool to work for XZC or is it going to be a massive pain in the ass? Seeing that there really aren't many pools around I'm guessing the latter...
full member
Activity: 1148
Merit: 132
any tips on how to use getwork and mine direct to wallet with wildrig ?

tried that using coinbase as user



wildrig_avx.exe --algo mtp --opencl-threads 1 --opencl-launch 16x0 --url http://192.168.0.15:8382 --user a8rGMA67WQ2DkTU6XYtsgjjFzSxKBFP7B6

this works for ccminer

ccminer.exe -a mtp -o http://192.168.0.15:8382 -u zcoin -p x --no-getwork --coinbase-addr a8rGMA67WQ2DkTU6XYtsgjjFzSxKBFP7B6
Pages:
Jump to: