WildRig Multi 0.35.1 beta 2 multi-algo miner for AMD & NVIDIA - page 51.

andrucrypt

member

Activity: 724

Merit: 49

Quote from: WhyMe on December 06, 2018, 06:47:53 PM

Quote from: andrucrypt on December 06, 2018, 07:39:56 AM

Support for Lyra2vc0ban algo can be found here (there i a bug with avg. effort for this algo, so don't worry about red numbers)

So you've added a new algo for one, old, coin with 'no' exchange ?

It wasn't hard and not time consuming, and I added it because it was implemented in CryptoDredge for NVIDIA. Mostly I didn't check coins itself, and warn people about risks in Discord. Anyway, this is the last one algo like this I'm adding. Further I will focus on improvements and check some other interesting algo's.

WhyMe

sr. member

Activity: 661

Merit: 250

Quote from: andrucrypt on December 06, 2018, 07:39:56 AM

Support for Lyra2vc0ban algo can be found here (there i a bug with avg. effort for this algo, so don't worry about red numbers)

So you've added a new algo for one, old, coin with 'no' exchange ?

QuintLeo

legendary

Activity: 1498

Merit: 1030

Quote from: TasosRiv on December 06, 2018, 02:30:51 PM

It seems a lot of people use the 570 cards, didn't the VEGA had any success with the miners?
What coins do you guys find most profitable to mine with your setups?

Vega was not an efficient option on ETH mining (where most 4xx/5xx cards are used), fairly low hashrate vs quite high power consumption.
It DID shine on the original Cryptonight algorithm, once the drivers got fixed for large page support - but that was about the ONLY bright spot for it.

TasosRiv

member

Activity: 232

Merit: 24

It seems a lot of people use the 570 cards, didn't the VEGA had any success with the miners?
What coins do you guys find most profitable to mine with your setups?

Is XDNA's mining doing well?

didle

newbie

Activity: 29

Merit: 0

Good jobs!!!! GRAC!!!!

4*480 8GB MSI Armor(samsung)

http://prntscr.com/lrm3ve

lyra2vc0ban 195 Mh/s

Thank U

Glane

newbie

Activity: 9

Merit: 0

Quote from: Doommann on September 17, 2018, 06:25:59 AM

Quote from: andrucrypt on September 17, 2018, 04:09:46 AM

Quote from: platedscrap on September 16, 2018, 03:48:27 PM

is there any way to add gfx804 kernel for sapphire pulse rx 550?

Unfortunately no. Because of toolchain restrictions, this will be hard to maintain. Maybe someday in future.

Quote from: justoiurii on September 17, 2018, 03:19:13 AM

Hi, master!
How about deeponion (x13), lux(phi2) into todo list?
Thanks in advance))

X11, X13, X14 and X15 are ASIC minable, so I don't see any reason to add it into miner

What about phi2 - no plans for it right now, need some time to learn Lyra2 family algo's and difference between them.

You can implement the protocol YescryptR32?

!!! Great WildRig Multi Developers - Please support protocol YescryptR32 in next build WildRig Multi...

AMD GPU Mining Community is !!! REALY NEED !!! solution for AMD GPU Cards not support mining algorithm YescryptR32...

(Algorithm YescryptR16 / YescryptR32 is released for NVIDIA GPU Mining - Supported on ccMiner CUDA release KlausTyescryptv10...)

andrucrypt

member

Activity: 724

Merit: 49

Support for Lyra2vc0ban algo can be found here (there i a bug with avg. effort for this algo, so don't worry about red numbers)
note: consider your risks while mining new coins.

arierep60

newbie

Activity: 50

Merit: 0

thank you for this great miner

john1010

hero member

Activity: 2114

Merit: 562

Quote from: UselessGuru on December 02, 2018, 03:42:30 AM

RX560 2GB does not work (RX570 4GB is OK):

wildrig.exe --algo=exosis --api-port=4002 --url=stratum+tcp://exosis.eu.mine.zpool.ca:3557 --user=****************************** --pass=multipoolminer,c=BTC --multiple-instance --opencl-threads 2 --opencl-launch 18x128 --donate-level 1 --opencl-platform=1 --opencl-devices=1

Code:

* VERSIONS: WildRig/0.13.4 beta libuv/1.21.0 OpenCL/2.0 MSVC/2015
* CPU: Intel(R) Core(TM) i5-8600K CPU @ 3.60GHz x64 AES-NI
* ALGO: exosis
* POOL #1: exosis.eu.mine.zpool.ca:3557
* API PORT: 4002
* COMMANDS: hashrate, pause, resume
[09:35:50] donation: 1%
[09:35:50] strategy: 0
[09:35:50] send-stale: no
[09:35:50] watchdog: disabled
[09:35:50] good-risers: default
[09:35:50] compiling code and initializing GPUs. This will take a while...
[09:35:50] GPU #1 [BusID: #5] [Baffin] AMD Radeon (TM) RX 560
[09:35:50] threads: 2, intensity: 18, worksize: 128/256, cu: 16
[09:35:51] use pool exosis.eu.mine.zpool.ca:3557 51.38.99.97
[09:35:51] Stratum set difficulty to 8.0000
[09:35:51] new job from exosis.eu.mine.zpool.ca:3557 diff 134.22M
[09:35:51] hash order: Jh5SknBlkBmwLufGroCubKck
[09:36:21] new job from exosis.eu.mine.zpool.ca:3557 diff 134.22M
[09:36:21] hash order: Jh5SknBlkLufBmwCubGroKck
[09:36:54] speed 10s/60s/15m n/a n/a n/a kH/s max: n/a kH/s
[09:37:15] GPU #1: 10s/60s/15m n/a n/a n/a kH/s
...
[09:41:55] GPU #1: 10s/60s/15m n/a n/a n/a kH/s
[09:41:55] speed 10s/60s/15m n/a n/a n/a kH/s max: n/a kH/s
[09:41:55] GPU #1: 10s/60s/15m n/a n/a n/a kH/s
[09:41:55] speed 10s/60s/15m n/a n/a n/a kH/s max: n/a kH/s

Try this command:

wildrig.exe --algo=exosis --api-port=4002 --url=stratum+tcp://exosis.eu.mine.zpool.ca:3557 --user=****************************** --pass=multipoolminer,c=BTC --multiple-instance --opencl-threads 2 --opencl-launch 18x0 --donate-level 1 --opencl-platform=1 --opencl-devices=1

Try to remove the 128 and replace it wit zero. let me know if it is working.

john1010

hero member

Activity: 2114

Merit: 562

I'm always amaze of every each release version of this miner, there's a lot of features, improvement added, kudos to the developer of this miner and we are always happy to support and to use your miner. Thanks

FFI2013

hero member

Activity: 906

Merit: 507

I'm running my gigabyte 560 4gb on x22i along with the rest of my cards but I'm wondering if you where thinking to add the new sia there's not alot of obelisk miners out there so I was wondering if adding gpu's on the chain could make a few coins

Suhofrukt

newbie

Activity: 10

Merit: 0

Will the use of the RX550?

ivvi30

newbie

Activity: 18

Merit: 0

Hello. Hashdrait on algorithm x21s on a card asus ROG-STRIX-RX570-O4G-GAMING 5.56kh

lost2217

newbie

Activity: 8

Merit: 0

for algorithm x21r and cards rx470\570 at 1300/1500 gives 60++
@echo off

:loop
wildrig.exe --algo x21s --api-port=4002 --opencl-threads 2 --opencl-launch 22x256 --opencl-devices=0,1,2 --url stratum+tcp://pool.minermore.com:4545 --user lost2217.worker --pass x
--opencl-platform=1 --opencl-devices=1
if ERRORLEVEL 1000 goto custom
timeout /t 5
goto loop

:custom
echo Custom command here
timeout /t 5
goto loop

andrucrypt

member

Activity: 724

Merit: 49

Quote from: Bigpiggy01 on December 01, 2018, 12:15:41 PM

Might something like polaris 12 support be in the works? RX550 and 560?

I will check possibility to add it next week. Main problem is that AMD compiler doesn't support those cards in "offline mode".

andrucrypt

member

Activity: 724

Merit: 49

Quote from: UselessGuru on December 02, 2018, 03:42:30 AM

RX560 2GB does not work (RX570 4GB is OK):

wildrig.exe --algo=exosis --api-port=4002 --url=stratum+tcp://exosis.eu.mine.zpool.ca:3557 --user=****************************** --pass=multipoolminer,c=BTC --multiple-instance --opencl-threads 2 --opencl-launch 18x128 --donate-level 1 --opencl-platform=1 --opencl-devices=1

Code:

* VERSIONS: WildRig/0.13.4 beta libuv/1.21.0 OpenCL/2.0 MSVC/2015
* CPU: Intel(R) Core(TM) i5-8600K CPU @ 3.60GHz x64 AES-NI
* ALGO: exosis
* POOL #1: exosis.eu.mine.zpool.ca:3557
* API PORT: 4002
* COMMANDS: hashrate, pause, resume
[09:35:50] donation: 1%
[09:35:50] strategy: 0
[09:35:50] send-stale: no
[09:35:50] watchdog: disabled
[09:35:50] good-risers: default
[09:35:50] compiling code and initializing GPUs. This will take a while...
[09:35:50] GPU #1 [BusID: #5] [Baffin] AMD Radeon (TM) RX 560
[09:35:50] threads: 2, intensity: 18, worksize: 128/256, cu: 16
[09:35:51] use pool exosis.eu.mine.zpool.ca:3557 51.38.99.97
[09:35:51] Stratum set difficulty to 8.0000
[09:35:51] new job from exosis.eu.mine.zpool.ca:3557 diff 134.22M
[09:35:51] hash order: Jh5SknBlkBmwLufGroCubKck
[09:36:21] new job from exosis.eu.mine.zpool.ca:3557 diff 134.22M
[09:36:21] hash order: Jh5SknBlkLufBmwCubGroKck
[09:36:54] speed 10s/60s/15m n/a n/a n/a kH/s max: n/a kH/s
[09:37:15] GPU #1: 10s/60s/15m n/a n/a n/a kH/s
...
[09:41:55] GPU #1: 10s/60s/15m n/a n/a n/a kH/s
[09:41:55] speed 10s/60s/15m n/a n/a n/a kH/s max: n/a kH/s
[09:41:55] GPU #1: 10s/60s/15m n/a n/a n/a kH/s
[09:41:55] speed 10s/60s/15m n/a n/a n/a kH/s max: n/a kH/s

GPU hanged, try increase voltage or lower your OC(probably too high mem).

UselessGuru

jr. member

Activity: 200

Merit: 3

RX560 2GB does not work (RX570 4GB is OK):

wildrig.exe --algo=exosis --api-port=4002 --url=stratum+tcp://exosis.eu.mine.zpool.ca:3557 --user=****************************** --pass=multipoolminer,c=BTC --multiple-instance --opencl-threads 2 --opencl-launch 18x128 --donate-level 1 --opencl-platform=1 --opencl-devices=1

Code:

* VERSIONS: WildRig/0.13.4 beta libuv/1.21.0 OpenCL/2.0 MSVC/2015
* CPU: Intel(R) Core(TM) i5-8600K CPU @ 3.60GHz x64 AES-NI
* ALGO: exosis
* POOL #1: exosis.eu.mine.zpool.ca:3557
* API PORT: 4002
* COMMANDS: hashrate, pause, resume
[09:35:50] donation: 1%
[09:35:50] strategy: 0
[09:35:50] send-stale: no
[09:35:50] watchdog: disabled
[09:35:50] good-risers: default
[09:35:50] compiling code and initializing GPUs. This will take a while...
[09:35:50] GPU #1 [BusID: #5] [Baffin] AMD Radeon (TM) RX 560
[09:35:50] threads: 2, intensity: 18, worksize: 128/256, cu: 16
[09:35:51] use pool exosis.eu.mine.zpool.ca:3557 51.38.99.97
[09:35:51] Stratum set difficulty to 8.0000
[09:35:51] new job from exosis.eu.mine.zpool.ca:3557 diff 134.22M
[09:35:51] hash order: Jh5SknBlkBmwLufGroCubKck
[09:36:21] new job from exosis.eu.mine.zpool.ca:3557 diff 134.22M
[09:36:21] hash order: Jh5SknBlkLufBmwCubGroKck
[09:36:54] speed 10s/60s/15m n/a n/a n/a kH/s max: n/a kH/s
[09:37:15] GPU #1: 10s/60s/15m n/a n/a n/a kH/s
...
[09:41:55] GPU #1: 10s/60s/15m n/a n/a n/a kH/s
[09:41:55] speed 10s/60s/15m n/a n/a n/a kH/s max: n/a kH/s
[09:41:55] GPU #1: 10s/60s/15m n/a n/a n/a kH/s
[09:41:55] speed 10s/60s/15m n/a n/a n/a kH/s max: n/a kH/s

Bigpiggy01

hero member

Activity: 1138

Merit: 523

Might something like polaris 12 support be in the works? RX550 and 560?

andrucrypt

member

Activity: 724

Merit: 49

Quote from: UlrichN on November 28, 2018, 07:03:49 AM

Have I gotten blind on the old kernel folder or is there really none for Pitcairn ?

Quote from: Alecsandro on November 29, 2018, 01:23:04 PM

Do you have found something I just discovered about this miner but I only have old cards here R7 370 Sad

* VERSIONS: WildRig/0.13.2 beta libuv/1.8.0 OpenCL/2.0 gcc/5.4.0
* CPU: Intel(R) Celeron(R) CPU G3930 @ 2.90GHz x64 AES-NI
* ALGO: x16r
* POOL #1: pool.minermore.com:4501
* COMMANDS: hashrate, pause, resume
[16:13:03] donation: 2%
[16:13:03] strategy: 0
[16:13:03] send-stale: no
[16:13:03] watchdog: disabled
[16:13:03] good-risers: default
[16:13:03] compiling code and initializing GPUs. This will take a while...
[16:13:03] GPU #0 [BusID: #3] [Pitcairn] AMD Radeon (TM) R7 300 Series
[16:13:03] threads: 1, intensity: 18, worksize: 0/256, cu: 8
[16:13:03] There is no suitable kernel for GPU #0: failed to open kernel-pitcairn.bin
[16:13:03] Failed to start OpenCL threads

Sorry guys, so old hardware i not supported and there is no plans for this in near future.

andrucrypt

member

Activity: 724

Merit: 49

Quote from: shumway on December 01, 2018, 10:21:59 AM

x221 squa algo on 0,13.4 if u set to mine that for some reason aergo algo it sets too may want to look into that this is on hive results it rejected shares only

x221 is wrong, you need x22i

Topic: WildRig Multi 0.35.1 beta 2 multi-algo miner for AMD & NVIDIA - page 51. (Read 92264 times)