Hey Mr. S.
Are you using windows 10?
If so, have you fully updated it?
Your previous configuration had windows 8, but are you sure of which software has been installed? How about Windows updates on this machine? Its possible that you are missing something in your newly installed windows that came from an update on your old machine (depending on how new the installation is, it may take a few days for it to get all of the updates it needs).
Topic: Wolf's XMR GPU Miner - page 2. (Read 117592 times)
Hi
Sorry to jump on this thread, but I'm pulling my hair out here.
I was running Wolf's XMR Miner without a problem on an ASRock H81 Pro, mining on a few RX460's. I was having problems with my Windows 8.1 License, so re-installed windows.
Since re-installing Windows, when I try to run Wolf's XMR Miner, I get "Error -1 when calling clGetDeviceIDs for number of devices".
I have tried several versions of the Radeon driver and re-installed windows from scratch again, with the same result.
I've tried with just 1 gpu, and swapped that a few times, and tried different risers and slots, in case it's a problem with one of the cards or risers.
I have disabled on board graphics.
The GPU's are recognised in MSI Afterburner with full control over all sliders. TechPowerUp GPU-Z also recognises each card.
I just can't figure out why Wolf won't work.
Any ideas?
Many thanks
Mr S
Sorry to jump on this thread, but I'm pulling my hair out here.
I was running Wolf's XMR Miner without a problem on an ASRock H81 Pro, mining on a few RX460's. I was having problems with my Windows 8.1 License, so re-installed windows.
Since re-installing Windows, when I try to run Wolf's XMR Miner, I get "Error -1 when calling clGetDeviceIDs for number of devices".
I have tried several versions of the Radeon driver and re-installed windows from scratch again, with the same result.
I've tried with just 1 gpu, and swapped that a few times, and tried different risers and slots, in case it's a problem with one of the cards or risers.
I have disabled on board graphics.
The GPU's are recognised in MSI Afterburner with full control over all sliders. TechPowerUp GPU-Z also recognises each card.
I just can't figure out why Wolf won't work.
Any ideas?
Many thanks
Mr S
Hi all...
How can i use wolfs miner with xmrig-proxy...
How can i use wolfs miner with xmrig-proxy...
I did some tests with my Asus Strix R9 380 2GB (990/1550 stable oc for me and stok rom)
and Claymore v10.2
Is there a recommendation for R9 380 2GB?
Code:
raw864 worksize4 550h
raw864 worksize8 572h
raw864 worksize16 561h
raw856 worksize8 570h
raw856 worksize4 546h
raw872 worksize16 563h
raw872 worksize8 573h
raw872 worksize4 549h
raw880 worksize8 513h
raw880 worksize4 494h
and Claymore v10.2
Code:
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
NsGpuCNMiner -xpool stratum+ssl://pool.minexmr.com:6666 -xwal xxxyyyzzz -xpsw x -allpools 1 -h 864 -dmem 0
Code:
XMR - Total Speed: 588 H/s, Total Shares: 1, Rejected: 0, Time: 00:00
XMR: GPU0 588 H/s
Is there a recommendation for R9 380 2GB
? My best conf for HIS RX580 IceQ X² OC 8GB GDDR5 256Bit
Core Clock 1366 / Memory Clock 2250
Modded Rom...
Total Hashrate: ~1719.65H/s
thanks for it........i did try it and it works nice on 3 RX480 8g and i get arround Core Clock 1366 / Memory Clock 2250
Modded Rom...
Total Hashrate: ~1719.65H/s
Code:
{
"Algorithms":
[
{
"name": "CryptoNight",
"devices":
[
{
"index": 0,
"corefreq": 500,
"memfreq": 1500,
"fanspeed": 65,
"powertune": 20,
"threads": 2,
"rawintensity": 896,
"worksize": 8
},
{
"index": 1,
"corefreq": 500,
"memfreq": 1500,
"fanspeed": 65,
"powertune": 20,
"threads": 2,
"rawintensity": 896,
"worksize": 8
}
],
"pools":
[
{
"url": "stratum+tcp://pool.minexmr.com:7777",
"user": "xzzxxzxzxzxzczxcvxzvzxczxczxc",
"pass": "x"
}
]
}
]
}[01:51:14] Share accepted: 13/13 (100.00%)
[01:51:19] Total Hashrate: 2658.71H/s
Thanks again.
i think this settings for RX 480 but not for mine rx 580 lol...
For RX 580
Code:
"index": 0,
"corefreq": 500,
"memfreq": 1500,
"fanspeed": 65,
"powertune": 20,
"threads": 2,
"rawintensity": 1024,
"worksize": 8
Wolf s hash is better.. but cpu miner is not so good.. wolf gets ~180h/s (i7 2600k)
Code:
"name": "CryptoNight",
"devices":
[
{
"index": -1,
"threads": 4,
"rawintensity": 16,
"worksize": 16
xmr-stak-amd gets ~270h/s
My best conf for HIS RX580 IceQ X² OC 8GB GDDR5 256Bit
Core Clock 1366 / Memory Clock 2250
Modded Rom...
Total Hashrate: ~1719.65H/s
thanks for it........i did try it and it works nice on 3 RX480 8g and i get arround Core Clock 1366 / Memory Clock 2250
Modded Rom...
Total Hashrate: ~1719.65H/s
Code:
{
"Algorithms":
[
{
"name": "CryptoNight",
"devices":
[
{
"index": 0,
"corefreq": 500,
"memfreq": 1500,
"fanspeed": 65,
"powertune": 20,
"threads": 2,
"rawintensity": 896,
"worksize": 8
},
{
"index": 1,
"corefreq": 500,
"memfreq": 1500,
"fanspeed": 65,
"powertune": 20,
"threads": 2,
"rawintensity": 896,
"worksize": 8
}
],
"pools":
[
{
"url": "stratum+tcp://pool.minexmr.com:7777",
"user": "xzzxxzxzxzxzczxcvxzvzxczxczxc",
"pass": "x"
}
]
}
]
}[01:51:14] Share accepted: 13/13 (100.00%)
[01:51:19] Total Hashrate: 2658.71H/s
Thanks again.
My best conf for HIS RX580 IceQ X² OC 8GB GDDR5 256Bit
Core Clock 1366 / Memory Clock 2250
Modded Rom...
Total Hashrate: ~1719.65H/s
Core Clock 1366 / Memory Clock 2250
Modded Rom...
Total Hashrate: ~1719.65H/s
Code:
{
"Algorithms":
[
{
"name": "CryptoNight",
"devices":
[
{
"index": 0,
"corefreq": 500,
"memfreq": 1500,
"fanspeed": 65,
"powertune": 20,
"threads": 2,
"rawintensity": 896,
"worksize": 8
},
{
"index": 1,
"corefreq": 500,
"memfreq": 1500,
"fanspeed": 65,
"powertune": 20,
"threads": 2,
"rawintensity": 896,
"worksize": 8
}
],
"pools":
[
{
"url": "stratum+tcp://pool.minexmr.com:7777",
"user": "xzzxxzxzxzxzczxcvxzvzxczxczxc",
"pass": "x"
}
]
}
]
}
There is something wrong with this miner. It exploited my rigs for a week with 'xmr-eu.suprnova.cc' without any earnings and without any error, so I was in delusion thal all OK. The rigs worked like it shound, and the electricity was wasted.
6990 «Rawintensity»:? «workize»?
Hello, I have the similar question: raw intensity and worksize for 6950 and 6850. Thanks in advance!
6990 «Rawintensity»:? «workize»?
Code:
--rawintensity 1008 --worksize 7 --gpu-threads 1 --no-extranonce
The miner is depreciated, i'd use this, comes with premade conf files.
https://github.com/zawawawa/gatelessgate/releases/download/v0.1.3-pre3/gatelessgate-0.1.3-pre3-win64.zip
Source for Linux too.
On my RX 580 4GB I get 830 H/s @ 90W.
Hi, one card RX50 8GB on my rig go with speed 830H/s, but others 5 only max.670H/s, windows 10 all updates, DAG fix driver 23 august, miner GG pre6
i try reinstall drivers with ddu + safe mode but do not help.
any help ?
thnx
----
BTC
reddevil 470 4gb x6 = 5048
@ 841H/s
mod reff:
Code:
https://bitcointalk.org/index.php?topic=1954245.0
http://www.overclock.net/t/1604567/polaris-bios-editing-rx5xx-rx4xx
6990 «Rawintensity»:? «workize»?
Code:
--rawintensity 1008 --worksize 7 --gpu-threads 1 --no-extranonce
The miner is depreciated, i'd use this, comes with premade conf files.
https://github.com/zawawawa/gatelessgate/releases/download/v0.1.3-pre3/gatelessgate-0.1.3-pre3-win64.zip
Source for Linux too.
On my RX 580 4GB I get 830 H/s @ 90W.
Hi, one card RX50 8GB on my rig go with speed 830H/s, but others 5 only max.670H/s, windows 10 all updates, DAG fix driver 23 august, miner GG pre6
i try reinstall drivers with ddu + safe mode but do not help.
any help ?
thnx
----
BTC
6990 «Rawintensity»:? «workize»?
Code:
--rawintensity 1008 --worksize 7 --gpu-threads 1 --no-extranonce
The miner is depreciated, i'd use this, comes with premade conf files.
https://github.com/zawawawa/gatelessgate/releases/download/v0.1.3-pre3/gatelessgate-0.1.3-pre3-win64.zip
Source for Linux too.
On my RX 580 4GB I get 830 H/s @ 90W.
6990 «Rawintensity»:? «workize»?
Says site cant be reached.
Trying to download this.
Trying to download this.
GitHub never goes down.
Says site cant be reached.
Trying to download this.
Trying to download this.
Thanks Wolf0. I have 3x rx570. After tweaking oc I was getting 2220 on claymore. Using 120 watts per card. Now I am using yours. I have 2190 hash. Which is more if you account for claymore fees. Best is I am down to 90 watts a gpu. That is 33% less power. Fantastic.
How did You get that hashrate?What parameters for "threads": ?, "rawintensity": ?, and "worksize": ? You are using for tweaking rx 570?!
TNX
hey guys, did you realize when using claymore's xmr miner with nofee option enabled you get the same hashrate as if you turned it on, I've been mining like that forever and no issues, it's like devfee is optional, and not necessary for the best speed since you already have it.
I don't know about other chips but I can confirm it for hawaii, fiji and polaris chips.
Can anyone else confirm this?
I thought about this too. And I think that Claymore can say that speed will be less to scare all of us ))) Maybe it's placebo?I don't know about other chips but I can confirm it for hawaii, fiji and polaris chips.
Can anyone else confirm this?
Anyway to check this we must look to the statistics on the pool to check accepted speed and verify it with miner speed except pool's fee.
I will check this too.
It's another way to not pay dev fee to Claymore - restart of miner every 16 min. But we lose the same or even more time that miner mines for dev.
EDIT: All day mined with -nofee 1 option. I don't see any difference on accepted speed by pool. It's not higher but not less..
hey guys, did you realize when using claymore's xmr miner with nofee option enabled you get the same hashrate as if you turned it on, I've been mining like that forever and no issues, it's like devfee is optional, and not necessary for the best speed since you already have it.
I don't know about other chips but I can confirm it for hawaii, fiji and polaris chips.
Can anyone else confirm this?
I don't know about other chips but I can confirm it for hawaii, fiji and polaris chips.
Can anyone else confirm this?
I remember in the readme or some post of Claymore stating that if you turn off the devfee, the hash rate will still report the same but the actual share acceptance rate of the miner will go down. (i think either 5 or 10%, can't remember)
What you see during miner running is what the program 'thinks' it's problem solving is as opposed to what the pool judges it to be.
hey guys, did you realize when using claymore's xmr miner with nofee option enabled you get the same hashrate as if you turned it on, I've been mining like that forever and no issues, it's like devfee is optional, and not necessary for the best speed since you already have it.
I don't know about other chips but I can confirm it for hawaii, fiji and polaris chips.
Can anyone else confirm this?
I don't know about other chips but I can confirm it for hawaii, fiji and polaris chips.
Can anyone else confirm this?
Interesting. But in the readme I can read :
"This miner is free-to-use, however, current developer fee is 2% if you use secure SSL/TLS connection to mining pool, miner mines 49 rounds for you and 1 round for developer.
If you use unsecure connection to mining pool, current developer fee is 2.5%, miner mines 39 rounds for you and 1 round for developer.
If you don't agree with the dev fee - don't use this miner, or use "-nofee" option.
Attempts to cheat and remove dev fee will cause a bit slower mining speed (same as "-nofee 1") though miner will show same hashrate."
So maybe your hashrate seems the same but is not ?
Hard to say. But I'm going to try too
I have a server with no gpu that I wanted to use my spare cpu power to mine.
However when I run this program I get an error saying opencl.dll is not installed.
Is there any way to run this miner or am I stuck with claymore?
Thanks
Krev
Look:However when I run this program I get an error saying opencl.dll is not installed.
Is there any way to run this miner or am I stuck with claymore?
Thanks
Krev
Quote
Wolf's XMR GPU Miner
Do you know what it is?Can you see a word GPU there?
Quote
Wolf's XMR GPU Miner
now I am hope you are clear?So it seems there's only GPU miner so you cannot use it to mine with CPU.
I used this miner before ETH was all the rage a year or so ago, I had to disable CPU mining because of the excessive load on the CPU. So yes it does or did have CPU mining.
Jump to: