I cant find the website for subscribing to your newsletter burnin, where is it? 
First post in this thread:
http://eepurl.com/zNH7v
Topic: [Work in progess] Burnins Avalon Chip to mining board service - page 109. (Read 624200 times)
First post in this thread:
http://eepurl.com/zNH7v
I cant find the website for subscribing to your newsletter burnin, where is it?
So I have a manufacturing question, will the chips and boards be tested before they are shipped. I ordered 150 chips, my question is if I opt to get just 7 bitburners, can I opt to have the last 10 chips used to replace any defective ones before it ships to me?
Also I am not sure about how I would like to do shipping, will I be able to pay for shipping separately?
Also I am not sure about how I would like to do shipping, will I be able to pay for shipping separately?
Yes all boards will be tested at the factory, any defective chip will be replaced by me free of charge as part of my service.
(The chip failure rate should be low, as they are factory tested as well)
Some teasers for the stacked BitBurners:
Which heatsink will be delivered ? The big black or the tiny silver one ?
Can I order the board pre-assembled without chips? and will it be the same price?
burnin,
I know it was mentioned earlier that both versions (10/20 chip) use the same pcb but will the 10 chip version come with support components placed and soldered for the other empty chain? That way we could at a later time add 10 more chips without having to place all those pesky smd parts and just reflow the chips.
Or maybe we can order a special 10 chip version or order the 20 chip but only solder 10 chips. Or this is a dumb idea...just wondering because many of us have an "extra" 10 chips.
I know it was mentioned earlier that both versions (10/20 chip) use the same pcb but will the 10 chip version come with support components placed and soldered for the other empty chain? That way we could at a later time add 10 more chips without having to place all those pesky smd parts and just reflow the chips.
Or maybe we can order a special 10 chip version or order the 20 chip but only solder 10 chips. Or this is a dumb idea...just wondering because many of us have an "extra" 10 chips.
Yes all boards will be tested at the factory, any defective chip will be replaced by me free of charge as part of my service.
(The chip failure rate should be low, as they are factory tested as well)
(The chip failure rate should be low, as they are factory tested as well)
perfect
that's what I call service!Cant wait to see the shop.
Can I order there 2 BitBurner XX stacked ready to run / complete kit, or do I have to get these stacking utilities by myself?
(of course, when chips delivered to you)
So I have a manufacturing question, will the chips and boards be tested before they are shipped. I ordered 150 chips, my question is if I opt to get just 7 bitburners, can I opt to have the last 10 chips used to replace any defective ones before it ships to me?
Also I am not sure about how I would like to do shipping, will I be able to pay for shipping separately?
Also I am not sure about how I would like to do shipping, will I be able to pay for shipping separately?
Yes all boards will be tested at the factory, any defective chip will be replaced by me free of charge as part of my service.
(The chip failure rate should be low, as they are factory tested as well)
Some teasers for the stacked BitBurners:
Hey guys,
what exactly means without cooler ? Without heatsink or wothout fan ?
Are those stacking pins included in every package ?
Regards.
what exactly means without cooler ? Without heatsink or wothout fan ?
Are those stacking pins included in every package ?
Regards.
Without heatsink or fan.
Hey guys,
what exactly means without cooler ? Without heatsink or wothout fan ?
Are those stacking pins included in every package ?
Regards.
what exactly means without cooler ? Without heatsink or wothout fan ?
Are those stacking pins included in every package ?
Regards.
So I have a manufacturing question, will the chips and boards be tested before they are shipped. I ordered 150 chips, my question is if I opt to get just 7 bitburners, can I opt to have the last 10 chips used to replace any defective ones before it ships to me?
Also I am not sure about how I would like to do shipping, will I be able to pay for shipping separately?
Also I am not sure about how I would like to do shipping, will I be able to pay for shipping separately?
TL;DR : 9PM CET email with shop URL
Dear Ben,
At 21:00 GMT (9PM) you will receive a second email indicating the shop's URL.
Dear Ben,
At 21:00 GMT (9PM) you will receive a second email indicating the shop's URL.
TL;DR is not the same
CET is not GMTTL;DR : 9PM CET email with shop URL
Dear Ben,
At 21:00 GMT (9PM) you will receive a second email indicating the shop's URL.
Dear Ben,
At 21:00 GMT (9PM) you will receive a second email indicating the shop's URL.
TL;DR is not the same
CET is not GMTSo we'll see if we get it at 9 CET or 11 CET (GMT is currently 2 hours earlier, see: http://www.worldtimebuddy.com/gmt-to-cet-converter?qm=1&lid=0,12,2790676&h=0&date=2013-7-22&sln=21-22)
Great stuff burnin, bring it on!
TL;DR : 9PM GMT / 11PM CET email with shop URL
Dear Ben,
the moment you have all been waiting for has come, i am about to open my webshop for ordering the BitBurner boards.
At 21:00 GMT (9PM) you will receive a second email indicating the shop's URL.
This is less advance warning then I had promised, but a bug in the shop kept me from announcing it.
Final prices:
BitBurner 10 Chip Complete: 98 eur
BitBurner 20 Chip Complete: 105 eur
BitBurner 10 Chip without cooler: 90 eur
BitBurner 20 Chip without cooler: 96 eur
Water cooler: 50eur
Bare PCB: 25eur <
All prices are without VAT, when ordering from the EU 19% VAT is added.
If you have an valid EuSt number you can also order tax-exempt from the EU.
Payment can be done through: Bitcoin, SEPA wire transfer and PayPal.
The policy for assigning the chips has changed:
The previous scheme of gathering all the signed messages turned out to be too much work load on my side.
Now you must inform your chip supplier that you want your chips to be assembled by me.
The way how that is done varies throughout the suppliers, but in most cases its done through a signed message like before.
Only that you send it to your supplier instead of me.
Zefir for example has a dedicated website for that.
Thats all for now
Burnin
Dear Ben,
the moment you have all been waiting for has come, i am about to open my webshop for ordering the BitBurner boards.
At 21:00 GMT (9PM) you will receive a second email indicating the shop's URL.
This is less advance warning then I had promised, but a bug in the shop kept me from announcing it.
Final prices:
BitBurner 10 Chip Complete: 98 eur
BitBurner 20 Chip Complete: 105 eur
BitBurner 10 Chip without cooler: 90 eur
BitBurner 20 Chip without cooler: 96 eur
Water cooler: 50eur
Bare PCB: 25eur <
All prices are without VAT, when ordering from the EU 19% VAT is added.
If you have an valid EuSt number you can also order tax-exempt from the EU.
Payment can be done through: Bitcoin, SEPA wire transfer and PayPal.
The policy for assigning the chips has changed:
The previous scheme of gathering all the signed messages turned out to be too much work load on my side.
Now you must inform your chip supplier that you want your chips to be assembled by me.
The way how that is done varies throughout the suppliers, but in most cases its done through a signed message like before.
Only that you send it to your supplier instead of me.
Zefir for example has a dedicated website for that.
Thats all for now
Burnin
Looks like separate batch orders, ordered closely to each other, will not be in same shipment if they were about to be delivered to same address. Bummer 
A logical continuation of the previous highly professional business behavior. 
13 weeks passed since zefirs first orders 
Which now has been shipped
https://bitcointalksearch.org/topic/m.2778325
Looks like separate batch orders, ordered closely to each other, will not be in same shipment if they were about to be delivered to same address. Bummer
13 weeks passed since zefirs first orders
Which now has been shipped
https://bitcointalksearch.org/topic/m.2778325
13 weeks passed since zefirs first orders
Which now has been shipped
https://bitcointalksearch.org/topic/m.2778325
13 weeks passed since zefirs first orders
EMC sensitivity? oh boy! thats something you definitely not want with your mining board.
My contractor has already stocked all needed parts, 1st. batch of pcb's should arrive next week.
Fridge starts and K16 reset itself, laptop USB port generated noise lead 10% hw errors, but raspi usb port "only" ~1-2% hw erros. But you can read more in kolondike thread from pages ~80 -> (but do more important jobs first so we get boards
Btw have your PCB's bottom full painted? I mean have chip thermal vias solder only? (Solder is better heat conductor than paint). Your three test PCB have full painted bottom. Avalon boards have paint free squares.
Please read after page 80 yourself, page 123 to be exact, 0.6% stable at 340mhz.. But its very irrelevant to this thread, the only similarities between the boards are use of Avalon chips and custom CgMiner drivers.. https://bitcointalk.org/index.php?topic=190731.2440
Jump to: