Topic: [Work in progess] Burnins Avalon Chip to mining board service - page 21. (Read 624211 times)
October 19, 2013, 11:39:01 AM
No tracking yet for (zefir chips) order 5xx.
October 19, 2013, 11:36:39 AM
Update: I just got tracking numbers for my zefir order.
whats your order number?Wow, my order number is 37x with chips from Zefir, received no tracking number also. And i idiot paid for EXPRESS shipping. Very nice.
October 19, 2013, 11:07:56 AM
Update: I just got tracking numbers for my zefir order.
got my #79x (sebastian) number also
So, 79x gets done, 6xx doesnt.
Awesome...?
October 19, 2013, 06:27:31 AM
Code:
Avalon: Fan1: 0/m, Fan2: 0/m, Fan3: 0/m Temp1: 55C, Temp2: 55C, Temp3: 55C, TempMAX: 59C
What's the option in cgminer to see detailed stats like that?
roy
In the window, I press D for display options, and then V for verbose output (and then Enter to return to the main screen).
October 19, 2013, 04:54:58 AM
Code:
Avalon: Fan1: 0/m, Fan2: 0/m, Fan3: 0/m Temp1: 55C, Temp2: 55C, Temp3: 55C, TempMAX: 59C
What's the option in cgminer to see detailed stats like that?
roy
October 19, 2013, 04:40:24 AM
no trackingnumber
no miner
zefir order 6xx
no miner
zefir order 6xx
October 19, 2013, 04:27:19 AM
Update: I just got tracking numbers for my zefir order.
got my #79x (sebastian) number also
October 18, 2013, 04:58:26 PM
Update: I just got tracking numbers for my zefir order.
whats your order number?
October 18, 2013, 04:56:40 PM
Update: I just got tracking numbers for my zefir order.
whats your order number? October 18, 2013, 04:42:03 PM
Update: I just got tracking numbers for my zefir order.
October 18, 2013, 12:13:32 PM
Quote
Did you already use Zadig to switch the device to use the WinUSB driver like the cgminer README says?
http://ck.kolivas.org/apps/cgminer/zadig/
Ok, now it worked. Tried the Zadig yesterday night. But no avail - didn't figure out that you would have to check 'list all devices' before the BitBurner can be chosen. Thanks!
October 18, 2013, 12:05:15 PM
Finally got my Bitburner XX. Just one, as as toy. The remainder of the order I had cancelled.
But it seems it is not recognized on the USB bus on Windows7:
running the command line:
gives this output:
So what is missing?
Already flashed the latest firmware from burnin's page, to be sure. Also tried different USB slots, but no success.
But it seems it is not recognized on the USB bus on Windows7:
running the command line:
Quote
"C:\Program Files\cgminer-3.6.3-windows\cgminer.exe" -o stratum.mining.eligius.st:3334 -u 1E1igiusfEjs1pCaGjEERExE9gYcrFwow7 -p password --avalon-options 115200:2:10:d:350 --bitburner-voltage 1270 --avalon-temp 60 --debug -nogpu
gives this output:
Quote
[2013-10-18 18:52:53] CL Platform 0 vendor: Intel(R) Corporation
[2013-10-18 18:52:53] CL Platform 0 name: Intel(R) OpenCL
[2013-10-18 18:52:53] CL Platform 0 version: OpenCL 1.1
[2013-10-18 18:52:53] Platform 0 devices: 1
[2013-10-18 18:52:53] 0 Intel(R) HD Graphics 4000
[2013-10-18 18:52:53] Unable to load ati adl library
[2013-10-18 18:52:53] 1 GPU devices max detected
[2013-10-18 18:52:53] USB all: found 6 devices - listing known devices
.USB dev 0: Bus 1 Device 2 ID: 0403:6001
** dev 0: Failed to open, err -12
[2013-10-18 18:52:53] 1 known USB devices
[2013-10-18 18:52:53] CL Platform 0 name: Intel(R) OpenCL
[2013-10-18 18:52:53] CL Platform 0 version: OpenCL 1.1
[2013-10-18 18:52:53] Platform 0 devices: 1
[2013-10-18 18:52:53] 0 Intel(R) HD Graphics 4000
[2013-10-18 18:52:53] Unable to load ati adl library
[2013-10-18 18:52:53] 1 GPU devices max detected
[2013-10-18 18:52:53] USB all: found 6 devices - listing known devices
.USB dev 0: Bus 1 Device 2 ID: 0403:6001
** dev 0: Failed to open, err -12
[2013-10-18 18:52:53] 1 known USB devices
So what is missing?
Already flashed the latest firmware from burnin's page, to be sure. Also tried different USB slots, but no success.
Did you already use Zadig to switch the device to use the WinUSB driver like the cgminer README says?
http://ck.kolivas.org/apps/cgminer/zadig/
October 18, 2013, 11:59:36 AM
Finally got my Bitburner XX. Just one, as as toy. The remainder of the order I had cancelled.
But it seems it is not recognized on the USB bus on Windows7:
running the command line:
gives this output:
So what is missing?
Already flashed the latest firmware from burnin's page, to be sure. Also tried different USB slots, but no success.
But it seems it is not recognized on the USB bus on Windows7:
running the command line:
Quote
"C:\Program Files\cgminer-3.6.3-windows\cgminer.exe" -o stratum.mining.eligius.st:3334 -u 1E1igiusfEjs1pCaGjEERExE9gYcrFwow7 -p password --avalon-options 115200:2:10:d:350 --bitburner-voltage 1270 --avalon-temp 60 --debug -nogpu
gives this output:
Quote
[2013-10-18 18:52:53] CL Platform 0 vendor: Intel(R) Corporation
[2013-10-18 18:52:53] CL Platform 0 name: Intel(R) OpenCL
[2013-10-18 18:52:53] CL Platform 0 version: OpenCL 1.1
[2013-10-18 18:52:53] Platform 0 devices: 1
[2013-10-18 18:52:53] 0 Intel(R) HD Graphics 4000
[2013-10-18 18:52:53] Unable to load ati adl library
[2013-10-18 18:52:53] 1 GPU devices max detected
[2013-10-18 18:52:53] USB all: found 6 devices - listing known devices
.USB dev 0: Bus 1 Device 2 ID: 0403:6001
** dev 0: Failed to open, err -12
[2013-10-18 18:52:53] 1 known USB devices
[2013-10-18 18:52:53] CL Platform 0 name: Intel(R) OpenCL
[2013-10-18 18:52:53] CL Platform 0 version: OpenCL 1.1
[2013-10-18 18:52:53] Platform 0 devices: 1
[2013-10-18 18:52:53] 0 Intel(R) HD Graphics 4000
[2013-10-18 18:52:53] Unable to load ati adl library
[2013-10-18 18:52:53] 1 GPU devices max detected
[2013-10-18 18:52:53] USB all: found 6 devices - listing known devices
.USB dev 0: Bus 1 Device 2 ID: 0403:6001
** dev 0: Failed to open, err -12
[2013-10-18 18:52:53] 1 known USB devices
So what is missing?
Already flashed the latest firmware from burnin's page, to be sure. Also tried different USB slots, but no success.
October 18, 2013, 10:56:43 AM
Is the fan speed actually controlled by cgminer or the firmware?
I see this in cgminer window:
I see this in cgminer window:
Code:
Avalon: Fan1: 0/m, Fan2: 0/m, Fan3: 0/m Temp1: 55C, Temp2: 55C, Temp3: 55C, TempMAX: 59C
However, I can hear that the fan speed actually changes but never gets to maximum (what I hear when the board is powered but not connected). Also, --avalon-fan and --avalon-temp options seem to have no effect at all. Using the latest cgminer on Raspbian. If the speed is controlled by the board itself, it would be great to see the firmware source code or at least the full communication protocol specs. October 18, 2013, 03:13:39 AM
Zefir sent you the chips on 21st of september, you should have received them by 23/24 september. Now I'm not sure if you said you will send the unit within 4 weeks or a month, but nice to see that the only speeding this mess up is your own deadline, so you don't need to fear consequences here. What a joke
The website says he gurantees shipping within a month after recieving the chips...
Im also looking for my tracking number... my chips are from Sebastian so I should get it tomorrow otherwise the month is over
October 18, 2013, 02:47:26 AM
Zefir sent you the chips on 21st of september, you should have received them by 23/24 september. Now I'm not sure if you said you will send the unit within 4 weeks or a month, but nice to see that the only speeding this mess up is your own deadline, so you don't need to fear consequences here. What a joke
PS: It's friday, no tracking, nothing.
This interprets to "Shipping will begin sunday. So basically Monday."
PS: It's friday, no tracking, nothing.
Zefirs batch will begin shipping this week and will probably be finished next week.
This interprets to "Shipping will begin sunday. So basically Monday."
You do see that "the end of next week" is later as you promised?
Edit:
5PM in germany, still nothing. I don't expect them to work on saturday or sunday. Would you like to comment on this, burnin?
October 17, 2013, 02:05:50 PM
Hi Burnin,
Just received a partial refund from you (50%)
However, I actually had 2 orders.
Are you refunding based on the orders, rather than customer?
I just wanted to check that my other one wasn't missed.
Thanks,
Just received a partial refund from you (50%)
However, I actually had 2 orders.
Are you refunding based on the orders, rather than customer?
I just wanted to check that my other one wasn't missed.
Thanks,
Yes, the refunds are performed on a per Order base.
So you need to mark all the orders you want refunded on cryptx's website.
If i missed some either mark them on their site OR drop me a mail.
It would have taken too much time to follow all the background on all orders of a particular user.
Since some people only wanted a single order refunded and sold another etc pp.
I will go through the remaining orders once the dust has settled to catch any orders left then.
As soon as i receive the cash for the Bitfury boards the other refunds will go through.
October 17, 2013, 01:37:56 PM
I payed via PayPal and also just received a partial refund (via PayPal) for:
50%*(Miner with VAT) + Power Supply with VAT + Shipping
In other words, full refund on power supply and shipping, 50% on the miner. Just as Burnin promised. As much as I'd like to see more, I can live with that, considering Burnin's situation. Thanks.
50%*(Miner with VAT) + Power Supply with VAT + Shipping
In other words, full refund on power supply and shipping, 50% on the miner. Just as Burnin promised. As much as I'd like to see more, I can live with that, considering Burnin's situation. Thanks.
October 17, 2013, 12:38:01 PM
Hello everybody,
today I got my Bitburner. But it seems that it does not work. I connected it with the power supply, but nothing happens. The fan does not move and the leds do not flash. What can I do? Is it corrupted?
today I got my Bitburner. But it seems that it does not work. I connected it with the power supply, but nothing happens. The fan does not move and the leds do not flash. What can I do? Is it corrupted?
Have you connected pin4 (green) of your ATX PSU to ground so the PSU will actually power itself on?
Yes, I did. It really doesn't work. I hope someone has another idea, and if not I hope burnin will change the miner.
I'd also recommend taking a multimeter and checking to see if the fuse is blown on the board. I had one that either blew the fuse instantly when I plugged in my psu (no visible or audible sound when it blew) or it was blown when I received it. I ended up replacing it a few times only to realize there was a short on the board somewhere. I just have it sitting right now.
October 17, 2013, 12:11:12 PM
Hello everybody,
today I got my Bitburner. But it seems that it does not work. I connected it with the power supply, but nothing happens. The fan does not move and the leds do not flash. What can I do? Is it corrupted?
today I got my Bitburner. But it seems that it does not work. I connected it with the power supply, but nothing happens. The fan does not move and the leds do not flash. What can I do? Is it corrupted?
Have you connected pin4 (green) of your ATX PSU to ground so the PSU will actually power itself on?
Yes, I did. It really doesn't work. I hope someone has another idea, and if not I hope burnin will change the miner.
Try one of the other power supply options burnin built into. In theory you only need 12V (or was it 9V) power supply from a source to test it.
Jump to: