Topic: [WTS] ATX PSU to 2.5 or 2.1/5.5mm 12V coaxial plug power cables [New Product!!] - page 7. (Read 68389 times)
March 09, 2014, 04:45:01 PM
@purp - yes, that will do in a pinch. Just be sure that the yellow wire goes to the center part of the plug. The devices require center positive, ground ring plugs. Also, you will max out at 3 plugs per PCIe extender.
March 09, 2014, 04:28:23 PM
Could I just hack off the ends of a PCIE extenstion cable like this:
http://i.imgur.com/m9FqSF4.jpg
And plug the bare wires into barrel plug adapters like this?
http://i.imgur.com/UGoL9x3.jpg
Basically, inserting one yellow and one black wire into the back of each barrel plug?
http://i.imgur.com/m9FqSF4.jpg
And plug the bare wires into barrel plug adapters like this?
http://i.imgur.com/UGoL9x3.jpg
Basically, inserting one yellow and one black wire into the back of each barrel plug?
March 09, 2014, 02:01:04 PM
** forming an orderly queue for this cable ** - hope those pictures helped Cablez
PS. anyone have a top choice of PSU/recommendations, just read over on the Gridseed post a 30W saving on using a Platinum PSU over the supplied PSU!. Any advice appreciated.
PS. anyone have a top choice of PSU/recommendations, just read over on the Gridseed post a 30W saving on using a Platinum PSU over the supplied PSU!. Any advice appreciated.
March 09, 2014, 08:34:16 AM
Any idea when these will be available to purchase? (The ATX Gridseed cables)
I have quotes outstanding with two places currently and I hope to hear back from them both soon. The bad part is they only work M-F.
These like the ones grid seed gives with orders now?? ATX female --> barrel plug??
The base cable is similar as it is 3 barrel plugs per PCIe which is safe for dual mode mining and it looks to be much shorter for less cable mess.
For those that are scrypt mode mining, I have designed the extensions that can safely add up to 15 miners (in groups of 5) per PCIe. Therein lies the difference. 
March 09, 2014, 08:32:49 AM
These like the ones grid seed gives with orders now?? ATX female --> barrel plug??
March 09, 2014, 06:44:13 AM
Any idea when these will be available to purchase? (The ATX Gridseed cables)
March 08, 2014, 11:06:15 PM
Cablez, are you planning to have strait or right angle plugs on the x5 extensions?
Current design is for straight plugs and I also altered them for 2.1mmID as well for a more snug fit as per the discussions around the gridseed threads.
March 08, 2014, 08:36:50 PM
Cablez, are you planning to have strait or right angle plugs on the x5 extensions?
March 08, 2014, 12:16:21 PM
I would like to put in a request for a Molex connector option. I have some old PSU's sitting around that would be perfect for scrypt only mining with a raspberry pi.
March 07, 2014, 09:11:10 AM
I have seen their offering and agree it is the safe option as their clientele could dual mode mine as well and three plugs would be the maximum per PCIe. This is why I went the modular route so miners could decide which way they want to go and the cabling solution would be ready for either.
I have refined some points with the manf. house and am awaiting a final quote. I hopefully should hear something today.
I have refined some points with the manf. house and am awaiting a final quote. I hopefully should hear something today.
March 07, 2014, 04:27:50 AM
Found this from liteningasic on the board. They are providing them for free on new and old orders from them. They look rather long. 3 plugs per PCIe.
Cablez, would rather buy from you...just thought you should know. I asked them for a cost but I don't know if they will sell them separate.
Cablez, would rather buy from you...just thought you should know. I asked them for a cost but I don't know if they will sell them separate.
they do 3 plugs ... one cable is around 8$
March 07, 2014, 01:32:50 AM
Found this from liteningasic on the board. They are providing them for free on new and old orders from them. They look rather long. 3 plugs per PCIe.
Cablez, would rather buy from you...just thought you should know. I asked them for a cost but I don't know if they will sell them separate.
Cablez, would rather buy from you...just thought you should know. I asked them for a cost but I don't know if they will sell them separate.
March 06, 2014, 09:54:50 AM
@Cablez Looking to power 20 gridseed miners on scrypt only mode. Any ETA when on these?
March 06, 2014, 12:10:19 AM
@Cartman - That is another nice layout. I would like to mention two things if you were to use the cables I am trying to build. The first is that your vertical side to side spacing might be a bit generous for the miners as the cable legs are specified at 14in/355mm per which gives a furthest end to end of about 20in/508mm for the five plug cable. Secondly, the wire cutouts for a cable design like this one would favor a central exit point to go between levels as its basically five equal legs joined in the center. No criticisms, just some thoughts.
Thanks...my original thought was to design with the 11PWR002-360W power supply in mind but looking at the sketch you drew up of the modular cables I can see what you mean.
March 05, 2014, 11:55:49 PM
edit *
March 05, 2014, 11:11:31 PM
Thanks for all the responses everyone. As soon as I hear something back I will let you all know.
Thanks for the measurements Spotswood. I left a bit of extra on the cables for those that will have their own setups but i really like your compact design. And with 200W ish a shelf, that is easily dealt with.
@Cartman - That is another nice layout. I would like to mention two things if you were to use the cables I am trying to build. The first is that your vertical side to side spacing might be a bit generous for the miners as the cable legs are specified at 14in/355mm per which gives a furthest end to end of about 20in/508mm for the five plug cable. Secondly, the wire cutouts for a cable design like this one would favor a central exit point to go between levels as its basically five equal legs joined in the center. No criticisms, just some thoughts.
Thanks for the measurements Spotswood. I left a bit of extra on the cables for those that will have their own setups but i really like your compact design. And with 200W ish a shelf, that is easily dealt with.
@Cartman - That is another nice layout. I would like to mention two things if you were to use the cables I am trying to build. The first is that your vertical side to side spacing might be a bit generous for the miners as the cable legs are specified at 14in/355mm per which gives a furthest end to end of about 20in/508mm for the five plug cable. Secondly, the wire cutouts for a cable design like this one would favor a central exit point to go between levels as its basically five equal legs joined in the center. No criticisms, just some thoughts.
March 05, 2014, 10:52:15 PM
Just throwing this out. Planning a multi level case to be used in a 4-post 19" server rack.
The first level will be the accessory section with stackable Gridseed levels. Haven't decided on 20 or 24 per Gridseed level.
The first level will be the accessory section with stackable Gridseed levels. Haven't decided on 20 or 24 per Gridseed level.
March 05, 2014, 10:22:08 PM
I am down for enough to power 30 gridseed units using spotswoods most recent design posting
March 05, 2014, 09:39:54 PM
@ADutchGamer - you read my mind. Here is my modular cable design for ATX powering of gridseed miners.
...
You can see from the design that this setup allows for dual mode miners to run safely with only 3 plugs per PCIe and allows for expansion of up to 15 plugs for scrypt miners on a single PCIe connector from the PSU. It also works well for those with 10 units as it leaves a single plug free to power a 12V usb hub if needed.
I have pretty much finalized the design except for the actual lengths needed. I could really use some help on that from anyone who has these units. I need to know approximately how long 5 units are end to end similar to how they would be in a spotswood case and also how far apart the individual plugs on the units are (pitch).
I have been pointed to a manufacturing house and will be getting a quote in to them as soon as the BOM, final measurements and order tally are finished. Once that is done I should get the prototype for testing from them and have pricing for you guys. If you haven't already drop a message here or in PM about how many devices you will be powering so I can determine what size order to put in, thanks.
If you have any comments or questions please feel free.
Here is my modular cable design for ATX powering of gridseed miners....
You can see from the design that this setup allows for dual mode miners to run safely with only 3 plugs per PCIe and allows for expansion of up to 15 plugs for scrypt miners on a single PCIe connector from the PSU. It also works well for those with 10 units as it leaves a single plug free to power a 12V usb hub if needed.
I have pretty much finalized the design except for the actual lengths needed. I could really use some help on that from anyone who has these units. I need to know approximately how long 5 units are end to end similar to how they would be in a spotswood case and also how far apart the individual plugs on the units are (pitch).
I have been pointed to a manufacturing house and will be getting a quote in to them as soon as the BOM, final measurements and order tally are finished. Once that is done I should get the prototype for testing from them and have pricing for you guys. If you haven't already drop a message here or in PM about how many devices you will be powering so I can determine what size order to put in, thanks.
If you have any comments or questions please feel free.
Approx 12-inches from the PSU to the front miner.
March 05, 2014, 09:31:55 PM
Put me down for 10 scrypt only connections.
Jump to: