[XCR] Crypti | Dapps | Sidechains | Dapp Store | OPEN SOURCE | 100% own code | DPoS - page 302.

matrix961

full member

Activity: 150

Merit: 100

Quote from: schmelix on September 01, 2014, 09:09:19 AM

Quote from: matrix961 on September 01, 2014, 07:04:23 AM

I'm posting an updated blockchain for anyone that has to start from scratch instead of syncing the whole thing again. This one was copied at 7:22am EST 9/1/2014. I know for me having to sync from scratch takes forever. I've tested this and it does load back up fine and starts syncing again. The initial load up can take some time tho. To make sure it was a clean copy I shutdown my node first after making sure it wasn't in the middle of a write operation then copied it.

The file is about 45mb so I went ahead and zipped it up so the download will be about 16mb.

https://drive.google.com/file/d/0BxcKUsP4qnerTl9TcUFKT2I0Qmc

Thanks!

But my nodes are still not able to sync since 1,5 hours

Figured it was worth a try for anyone having issues. Hopefully 0.1.6 will release soon.

schmelix

newbie

Activity: 49

Merit: 0

Quote from: matrix961 on September 01, 2014, 07:04:23 AM

I'm posting an updated blockchain for anyone that has to start from scratch instead of syncing the whole thing again. This one was copied at 7:22am EST 9/1/2014. I know for me having to sync from scratch takes forever. I've tested this and it does load back up fine and starts syncing again. The initial load up can take some time tho. To make sure it was a clean copy I shutdown my node first after making sure it wasn't in the middle of a write operation then copied it.

The file is about 45mb so I went ahead and zipped it up so the download will be about 16mb.

https://drive.google.com/file/d/0BxcKUsP4qnerTl9TcUFKT2I0Qmc

Thanks!

But my nodes are still not able to sync since 1,5 hours

Litoshi

hero member

Activity: 700

Merit: 500

Member of the Crypti Foundation Board of Directors

Quote from: Sammie Sna on September 01, 2014, 07:57:00 AM

Oh.the price is so low and i don't have money to buy more.....What i can do..!! Grin

Get some BTC from faucets:

Link is below

Litoshi

hero member

Activity: 700

Merit: 500

Member of the Crypti Foundation Board of Directors

I sent .2 BTC from Coinbase to Cryptsy yesterday, ( 1 months worth of faucet BTC) and after 10 hours it still did not show. Now this AM, I see this on Cryptsy:

Deposits delayed

Due to a failure we are bringing an older wallet back online and it is affecting deposits for users with an address in that wallet. If you want more rapid transactions then generating a new address should help the issue. We know this is not a long term solution and are working to reinstate addresses from the other wallet as rapidly as possible.

informer

member

Activity: 238

Merit: 10

Crypti mentioned in Cryptomen Weekly report:

http://cryptomen.com/2014/08/cryptomen-weekly-report-august-27-2014/

informer

Sammie Sna

member

Activity: 92

Merit: 10

Oh.the price is so low and i don't have money to buy more.....What i can do..!! Grin

informer

member

Activity: 238

Merit: 10

Quote from: luckygenough56 on September 01, 2014, 07:09:02 AM

Where i'm supposed to put that blockchain ?

If you trust it you can place it in your root directory and overwrite the current one. Personally, I'm waiting for 0.1.6. It will be probably be released today or tomorrow.

informer

mydearvoice

sr. member

Activity: 250

Merit: 250

Looking forward to the arrival of the Windows wallet Grin

luckygenough56

legendary

Activity: 1526

Merit: 1012

Where i'm supposed to put that blockchain ?

matrix961

full member

Activity: 150

Merit: 100

I'm posting an updated blockchain for anyone that has to start from scratch instead of syncing the whole thing again. This one was copied at 7:22am EST 9/1/2014. I know for me having to sync from scratch takes forever. I've tested this and it does load back up fine and starts syncing again. The initial load up can take some time tho. To make sure it was a clean copy I shutdown my node first after making sure it wasn't in the middle of a write operation then copied it.

The file is about 45mb so I went ahead and zipped it up so the download will be about 16mb.

https://drive.google.com/file/d/0BxcKUsP4qnerTl9TcUFKT2I0Qmc

luckygenough56

legendary

Activity: 1526

Merit: 1012

I would say it's rather a lack of Windows wallet right now Grin

ebite

member

Activity: 70

Merit: 10

Quote from: crypti on June 16, 2014, 10:07:39 AM

It's built to solve the biggest problem with current crypto-currencies, a lack of purchase motivation.

It seems people lack of purchase of XCR right now. Huh

Wulfcastle

hero member

Activity: 546

Merit: 500

@Devs

Any update

luckygenough56

legendary

Activity: 1526

Merit: 1012

BTC is cheap

hala

hero member

Activity: 546

Merit: 500

Quote from: luckygenough56 on September 01, 2014, 03:53:55 AM

nom nom nom

Thanks weak hands

i am not happy that i dont have enough BTC to buy them . Angry

luckygenough56

legendary

Activity: 1526

Merit: 1012

nom nom nom

Thanks weak hands

pigheadbig

hero member

Activity: 742

Merit: 500

why the price dump?
buy some in cheap. good .

schmelix

newbie

Activity: 49

Merit: 0

Quote from: canej on September 01, 2014, 01:59:14 AM

Quote from: informer on August 31, 2014, 08:24:22 PM

Quote from: canej on August 31, 2014, 03:40:00 PM

Quote from: schmelix on August 31, 2014, 03:36:06 PM

Quote from: canej on August 31, 2014, 02:24:17 PM

I just cannot get block chain to sync... Any suggestions to try?

I have deleted the log file, deleted blockchain.db left it over night and .db file only like 3mb. Re done it again and been running for about 3 hours and db only 536k/b

What more can I do to get it to work?

same here

Still syncing for me.... blockchain is now 10 days behind nearly 5 hours sync. Can someone post a updated blockchain.db?

@canej and schmelix

Run

free -m

And see what your RAM is running at. Most likely this is due to a memory issue that has been addressed in the 0.1.6 release (which will be released very soon). If its more than 90% of your available RAM the kernel will not be able to function properly.

informer

@Informer
I have 4gb free I purposely added more memory and restarted the process. It seems to just stop syncing after 10 mins. So have to restart the service and then it sync's again for 10 mins then stops.

@informer: nope. There is still enough free memory avaiable on my servers.
@canej: free memory is not the cause of the issue. Can see the same behavior on my maschines... The blockchain stopps growing after a while ( ~960K )

canej

full member

Activity: 278

Merit: 100

Quote from: informer on August 31, 2014, 08:24:22 PM

Quote from: canej on August 31, 2014, 03:40:00 PM

Quote from: schmelix on August 31, 2014, 03:36:06 PM

Quote from: canej on August 31, 2014, 02:24:17 PM

I just cannot get block chain to sync... Any suggestions to try?

I have deleted the log file, deleted blockchain.db left it over night and .db file only like 3mb. Re done it again and been running for about 3 hours and db only 536k/b

What more can I do to get it to work?

same here

Still syncing for me.... blockchain is now 10 days behind nearly 5 hours sync. Can someone post a updated blockchain.db?

@canej and schmelix

Run

free -m

And see what your RAM is running at. Most likely this is due to a memory issue that has been addressed in the 0.1.6 release (which will be released very soon). If its more than 90% of your available RAM the kernel will not be able to function properly.

informer

@Informer
I have 4gb free I purposely added more memory and restarted the process. It seems to just stop syncing after 10 mins. So have to restart the service and then it sync's again for 10 mins then stops.

jiuge

sr. member

Activity: 280

Merit: 250

I think we should give dev some time.
What we can do:
1.If you are a day trader I have nothing to say.
2.If you are a fan of xcr , hold it and give some suggestion
3.If you have a lot of xcr,you can do some marketing for it.
4.If you are a investor,so just hold it. Grin

Topic: [XCR] Crypti | Dapps | Sidechains | Dapp Store | OPEN SOURCE | 100% own code | DPoS - page 302. (Read 804700 times)