I think that pool is down. No information is displayed on the site.
I can see their stats updating fine.
Topic: [XMR] Monero Mining - page 53. (Read 264872 times)
I think that pool is down. No information is displayed on the site.
I can see their stats updating fine.
I think that pool is down. No information is displayed on the site.
Could be a stuck daemon (to which I was referring in my last post), or extremely bad luck.
http://kippo.eu hasn't had an orphan in over 3 days / 27 blocks. Maybe it's just luck, or maybe it's the simple tweaks I made on the daemon.
Hard to tell for sure. I'm happy with how things are going nonetheless.
Been tinkering with a node script that should keep the daemon online automatically, as opposed to forced periodical restarts that some people have been recommending (which seems a bit inelegant in my opinion)
Hard to tell for sure. I'm happy with how things are going nonetheless.
Been tinkering with a node script that should keep the daemon online automatically, as opposed to forced periodical restarts that some people have been recommending (which seems a bit inelegant in my opinion)
That's a great support site!
After i read the post, i've changed my pool, now i'm mining on a small one, but i don't see my
hashrate and nothing i'm only getting this in my miner:
What am i dooing wrong?
Should i change again to the bigger pool?
After i read the post, i've changed my pool, now i'm mining on a small one, but i don't see my
hashrate and nothing i'm only getting this in my miner:
Code:
Stratum detected new block
Stratum connection timed out
Stratum connection interrupted
What am i dooing wrong?
Should i change again to the bigger pool?
Are you blind or what? Stop with this font man...
They have now paidIt's not all 100% finished but much better.
Still on it.
Are you blind or what? Stop with this font man...
They have now paid
Are you blind or what? Stop with this font man...
have anyone are mining XMR by solo or by P2Pool?
Tell me how to do it ?
P2Pool is currently not implemented. You could solo CPU mine from the daemon:Tell me how to do it ?
start_mining
You could solo mine on a single address from multiple machines. Currently if you have 3500 H/s you should get about a block each 2 days on average (more if you are lucky or less if you are not). With the difficulty raising each day I would not recommend you to solo mine with less then 2000-3000 H/s, but if you have 7000 H/s (this is a lot) you should solo mine for sure. If you want to GPU solo mine you should set a private pool of yours in order to do it (the pool software is open source), because you can't GPU mine from the daemon. If you set a pool you should automate the checking if the daemon freezes and restart it, because it's happening with the current code and you won't find blocks.
that is very helpful what you said upon,thanks a lot!
Any guide on how to set up a private pool to GPU mine ?
Yes, take a look at README there https://github.com/zone117x/node-cryptonote-pool
I always can set up a pool for you for small bounty like 0.12 BTC on Linux. But I believe you can do it easy.
BTW, you can just use my pool, it's small and you will get normal payouts if you want just avoid dust.
Do these mines have a JSON API to get their available information?
have anyone are mining XMR by solo or by P2Pool?
Tell me how to do it ?
P2Pool is currently not implemented. You could solo CPU mine from the daemon:Tell me how to do it ?
start_mining
You could solo mine on a single address from multiple machines. Currently if you have 3500 H/s you should get about a block each 2 days on average (more if you are lucky or less if you are not). With the difficulty raising each day I would not recommend you to solo mine with less then 2000-3000 H/s, but if you have 7000 H/s (this is a lot) you should solo mine for sure. If you want to GPU solo mine you should set a private pool of yours in order to do it (the pool software is open source), because you can't GPU mine from the daemon. If you set a pool you should automate the checking if the daemon freezes and restart it, because it's happening with the current code and you won't find blocks.
that is very helpful what you said upon,thanks a lot!
Any guide on how to set up a private pool to GPU mine ?
have anyone are mining XMR by solo or by P2Pool?
Tell me how to do it ?
P2Pool is currently not implemented. You could solo CPU mine from the daemon:Tell me how to do it ?
start_mining
You could solo mine on a single address from multiple machines. Currently if you have 3500 H/s you should get about a block each 2 days on average (more if you are lucky or less if you are not). With the difficulty raising each day I would not recommend you to solo mine with less then 2000-3000 H/s, but if you have 7000 H/s (this is a lot) you should solo mine for sure. If you want to GPU solo mine you should set a private pool of yours in order to do it (the pool software is open source), because you can't GPU mine from the daemon. If you set a pool you should automate the checking if the daemon freezes and restart it, because it's happening with the current code and you won't find blocks.
that is very helpful what you said upon,thanks a lot!
Yesterday I left few hashes on few smaller pools. Today I got payed from every pool, except http://monero.crypto-pool.fr/, so either they cheating miners or they don't have a clue what are they doing.
Address ?
Sent you an address also, hope it's OK. Thank you!
After the pools DDOS attack it's obvious that this should be prevented from the pools. There are some BTC pools on constant multi-layer different protocols attacks. For example Eligius pool (https://bitcointalksearch.org/topic/eligius-0-fee-btc-105-pps-nmc-no-registration-cppsrb-441465), operated by wizkid057 is always accepting shares and you are always mining no matter how hard the DDOS attack is to mitigate. If wizkid057, or other competent operators of big pools (constantly ddosed) could help the XMR pools in exchange of some XMR this would be of great help for the stability of the network on the long run.
Yesterday I left few hashes on few smaller pools. Today I got payed from every pool, except http://monero.crypto-pool.fr/, so either they cheating miners or they don't have a clue what are they doing.
Address ?
Yesterday I left few hashes on few smaller pools. Today I got payed from every pool, except http://monero.crypto-pool.fr/, so either they cheating miners or they don't have a clue what are they doing.
I'm sick of these attacks.
Everyone complain but what can we do ?
have anyone are mining XMR by solo or by P2Pool?
Tell me how to do it ?
P2Pool is currently not implemented. You could solo CPU mine from the daemon:Tell me how to do it ?
start_mining
You could solo mine on a single address from multiple machines. Currently if you have 3500 H/s you should get about a block each 2 days on average (more if you are lucky or less if you are not). With the difficulty raising each day I would not recommend you to solo mine with less then 2000-3000 H/s, but if you have 7000 H/s (this is a lot) you should solo mine for sure. If you want to GPU solo mine you should set a private pool of yours in order to do it (the pool software is open source), because you can't GPU mine from the daemon. If you set a pool you should automate the checking if the daemon freezes and restart it, because it's happening with the current code and you won't find blocks.
Jump to: