Pages:
Author

Topic: XMR-stak-JK 2.10.7 Compiled with no devfee (Updated: 2019-8-18) - page 2. (Read 28606 times)

legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
What version of VS and cmake (respectively) did you update to?

If this is so, I should submit a note to fireice-uk to have it noted in his build notes.
jr. member
Activity: 77
Merit: 6
came across 8 GT 690 to add mining XMR.

the auto config is detecting 2 cards (per card), is this correct? can anyone share the optimal configuration? blocks, threads?

which cuda version should be used with GTX 690?

thanks

some cards like multiple threads as they can multitask better...

check http://www.xmrstak.com for user-uploaded settings.


Yep;  its beautiful over here!   I will definitely enjoy my time!

I am trying to run cn-gpu but im getting invalid submits. With the release version its working fine?? Even when I compiled myself I was getting invalid submits. Can you try it on your end to see if its working properly?

cn-gpu?   is that a separate algo?  where are you mining to?

I could remotely test, but when I left for vacation I powered off my test rig and need to be there to physically power it on.

Send me the details of what pool you are mining to, a copy of your AMD/NVIDIA.txt file(s) or cpu.txt files using this format:
nvidia.txt
Code:
Code quoting examples like this one using the hashtag button

As well as provide the model of graphics card and vendor of card you are using; and any other applicable specific details I may need to know to test.

I will do a little research and see if I can have an answer for you.


I literally remotely compiled and uploaded the recent build while away on vacation, and could not test myself, though the initial party(s) haven't complained about any issue other than a potential reduced hashrate to other versions which may have just been the .txt files being reset to the new relaxed settings that were noted in the changelog/release notes on fireice's github.

I personally only use xmr-stak 100% for XMR; and no other coins/algos.   If you are mining a different coin/algo... I would have to set up to mine at whatever pool you are using so if that is so;  provide me your username and hopefully it has no password (or just an 'x') so i can use your profile to test and not worry about setting up a wallet for an address to mine-to, etc. because to be frank;  that is too much hassle for this free service I am providing.  If you are going to provide me your pool credentials;  send me a PM with your pools.txt using the code quoting example above.

And as a side note, im not sure if XTL-stak is even a thing that is present/used today.... I only compiled it once upon request because it uses almost identical code structures and compile settings.


It seems 2.16 is bugged for cn-GPU (RYO). I had to update my visual studios and cmake to get rid of the invalid shares.  Just a heads up if you want to mine another cn-GPU (ryo) this one will throw invalid submits.

Try it for yourself when you're back https://miningpoolstats.stream/ryo
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
came across 8 GT 690 to add mining XMR.

the auto config is detecting 2 cards (per card), is this correct? can anyone share the optimal configuration? blocks, threads?

which cuda version should be used with GTX 690?

thanks

some cards like multiple threads as they can multitask better...

check http://www.xmrstak.com for user-uploaded settings.


Yep;  its beautiful over here!   I will definitely enjoy my time!

I am trying to run cn-gpu but im getting invalid submits. With the release version its working fine?? Even when I compiled myself I was getting invalid submits. Can you try it on your end to see if its working properly?

cn-gpu?   is that a separate algo?  where are you mining to?

I could remotely test, but when I left for vacation I powered off my test rig and need to be there to physically power it on.

Send me the details of what pool you are mining to, a copy of your AMD/NVIDIA.txt file(s) or cpu.txt files using this format:
nvidia.txt
Code:
Code quoting examples like this one using the hashtag button

As well as provide the model of graphics card and vendor of card you are using; and any other applicable specific details I may need to know to test.

I will do a little research and see if I can have an answer for you.


I literally remotely compiled and uploaded the recent build while away on vacation, and could not test myself, though the initial party(s) haven't complained about any issue other than a potential reduced hashrate to other versions which may have just been the .txt files being reset to the new relaxed settings that were noted in the changelog/release notes on fireice's github.

I personally only use xmr-stak 100% for XMR; and no other coins/algos.   If you are mining a different coin/algo... I would have to set up to mine at whatever pool you are using so if that is so;  provide me your username and hopefully it has no password (or just an 'x') so i can use your profile to test and not worry about setting up a wallet for an address to mine-to, etc. because to be frank;  that is too much hassle for this free service I am providing.  If you are going to provide me your pool credentials;  send me a PM with your pools.txt using the code quoting example above.

And as a side note, im not sure if XTL-stak is even a thing that is present/used today.... I only compiled it once upon request because it uses almost identical code structures and compile settings.
jr. member
Activity: 77
Merit: 6
came across 8 GT 690 to add mining XMR.

the auto config is detecting 2 cards (per card), is this correct? can anyone share the optimal configuration? blocks, threads?

which cuda version should be used with GTX 690?

thanks

some cards like multiple threads as they can multitask better...

check http://www.xmrstak.com for user-uploaded settings.


Yep;  its beautiful over here!   I will definitely enjoy my time!

I am trying to run cn-gpu but im getting invalid submits. With the release version its working fine?? Even when I compiled myself I was getting invalid submits. Can you try it on your end to see if its working properly?
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
came across 8 GT 690 to add mining XMR.

the auto config is detecting 2 cards (per card), is this correct? can anyone share the optimal configuration? blocks, threads?

which cuda version should be used with GTX 690?

thanks

some cards like multiple threads as they can multitask better...

check http://www.xmrstak.com for user-uploaded settings.


Yep;  its beautiful over here!   I will definitely enjoy my time!
full member
Activity: 500
Merit: 105
came across 8 GT 690 to add mining XMR.

the auto config is detecting 2 cards (per card), is this correct? can anyone share the optimal configuration? blocks, threads?

which cuda version should be used with GTX 690?

thanks
jr. member
Activity: 77
Merit: 6
im on my way to hawaii.  ill do it as soon as i can.

screw that... enjoy Hawaii instead.  Grin

Compiled and uploaded 2.10.6 remotely.  Did not have time to test.  Hopefully I remembered all the DLL files this time.

Enjoy!

I was just there (Maui) 2 weeks ago! Enjoy your trip  Cool
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
im on my way to hawaii.  ill do it as soon as i can.

screw that... enjoy Hawaii instead.  Grin

Compiled and uploaded 2.10.6 remotely.  Did not have time to test.  Hopefully I remembered all the DLL files this time.

Enjoy!
sr. member
Activity: 703
Merit: 272
im on my way to hawaii.  ill do it as soon as i can.

screw that... enjoy Hawaii instead.  Grin
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
im on my way to hawaii.  ill do it as soon as i can.
sr. member
Activity: 703
Merit: 272
Will you be releasing a version for XMR-stak version 2.10.6?

https://github.com/fireice-uk/xmr-stak/releases
sr. member
Activity: 703
Merit: 272
Quote
has anyone tried it with a 5700XT yet?

Bits Be Trippin' did a review recently: https://www.youtube.com/watch?v=1j5WM29ECPk

Edit: edited.

don't need to see it... i verified.  it doesn't.

Rather than spitting empty sentences, base your opinions on facts.

It is a 12 minutes recap from 2 hours livestream, where Phoenix Miner was the only one he got working and JCE for cryptonight. Card still new and need driver improvement to work.



sure... i ran in on my card.. .it doesn't run.   there's nothing empty about that.  I don't need to see a two hour video on something i already know.  if you want to talk about JCE, then go over to that thread.  I was posting in the "XMR-stak-JK 2.10.5 Compiled with no devfee" thread
sr. member
Activity: 633
Merit: 267
Quote
has anyone tried it with a 5700XT yet?

Bits Be Trippin' did a review recently: https://www.youtube.com/watch?v=1j5WM29ECPk

Edit: edited.

don't need to see it... i verified.  it doesn't.

Rather than spitting empty sentences, base your opinions on facts.

It is a 12 minutes recap from 2 hours livestream, where Phoenix Miner was the only one he got working and JCE for cryptonight. Card still new and need driver improvement to work.

sr. member
Activity: 703
Merit: 272
Quote
has anyone tried it with a 5700XT yet?

Bits Be Trippin' did a review recently: https://www.youtube.com/watch?v=1j5WM29ECPk

Edit: edited.

don't need to see it... i verified.  it doesn't.
sr. member
Activity: 633
Merit: 267
Quote
has anyone tried it with a 5700XT yet?

Bits Be Trippin' did a review recently: https://www.youtube.com/watch?v=1j5WM29ECPk

Edit: edited.
sr. member
Activity: 703
Merit: 272
regards; someone has a valid configuration for 7970 or rx280 the most I get is 400 h / s

sounds about right for the older cards...

do you mean R9-280?

I run a RX560  and see at most 380h/s but typically ~320.

check https://www.xmrstak.com/  It is the place people post their configs.

You may need to mess with the AMD.txt file and fine tune your particular cards.

has anyone tried it with a 5700XT yet?
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
regards; someone has a valid configuration for 7970 or rx280 the most I get is 400 h / s

sounds about right for the older cards...

do you mean R9-280?

I run a RX560  and see at most 380h/s but typically ~320.

check https://www.xmrstak.com/  It is the place people post their configs.

You may need to mess with the AMD.txt file and fine tune your particular cards.
newbie
Activity: 26
Merit: 0
regards; someone has a valid configuration for 7970 or rx280 the most I get is 400 h / s
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
when I start xmr stak jk 2.10.5 there is the missing dll error, LIBEAY32 and SSLEAY32

I forgot to include them in the package, you can download an older copy from here and copy the two files, or you can download the original build from github and copy them from there...

they are just the SSL libraries.
newbie
Activity: 1
Merit: 0
when I start xmr stak jk 2.10.5 there is the missing dll error, LIBEAY32 and SSLEAY32
Pages:
Jump to: