[XPM]unofficial jhPrimeminer thread - page 14.

tandyuk

newbie

Activity: 28

Merit: 0

Quote from: dma88 on September 17, 2013, 11:54:54 PM

Quote from: ivanlabrie on September 09, 2013, 05:11:20 AM

Quote from: Quirlorimbo on September 09, 2013, 03:40:07 AM

Quote from: Roger3636 on September 09, 2013, 03:32:56 AM

Quote from: geofflosophy on September 09, 2013, 03:18:39 AM

tried running the primeminer on the beeeeer thread but it crashed on me. Anyone have it working with any of the jhPrimeminer versions?

it crashed because the server was down .. should work ok now servers back up

in the op
http://www.ppcointalk.org/index.php?topic=485.0 is a .diff file attached to the post.

it will fix the getwork protocol for mumus 7.x ...

The less technically inclined will have to live with pre compiled win binaries (cough me cough) Sad

I'm in the same boat, i can't code. I tried using the various jhPrimeiners with beeeeer, no luck since they all used getwork. I'm trying out beer bc apparently it's better for smaller (single cpu) miners. and it's always good to support new pools. xolo's miner seems to work about as fast as ypool's, I''m getting ~1.5xpm/day on my 6-core. some ppl said they got 3x more mining at beer, do they have jhprimeminer patched with the diff file? or is it just more stuff that's over my head lol

my latest linux build will work on beeeeer, but it has way more invalid shares than their miners which use getworx.
Im trying to port getworx over to my miner, unsuccessfully so far, because my c++ isnt that great yet!

ivanlabrie

hero member

Activity: 812

Merit: 1000

Quote from: dma88 on September 18, 2013, 09:48:42 AM

Quote from: ivanlabrie on September 18, 2013, 04:52:40 AM

I've gotten 6.42xpm in four days, but I only mined for short intervals, I'd estimate 12hs per day.

so you're getting ~~way more~~ ~2x more than I am. are you using any special settings? what cpu do you have?

I7 3820 at 4.3ghz, compiled the primeminer myself using hp10 optimizations posted in mikaelh's linux compilation guide.
Getting 2 chains per day, vs the 1.2 chains per day windows build gave me.
Settings I cannot post them right now since my pc is off and I didn't install ssh to connect via putty yet (lazy lol) That's why I don't mine 24/7 yet :p
I'll post them here for you later today.

dma88

member

Activity: 117

Merit: 10

Quote from: ivanlabrie on September 18, 2013, 04:52:40 AM

I've gotten 6.42xpm in four days, but I only mined for short intervals, I'd estimate 12hs per day.

so you're getting ~~way more~~ ~2x more than I am. are you using any special settings? what cpu do you have?

ivanlabrie

hero member

Activity: 812

Merit: 1000

I've gotten 6.42xpm in four days, but I only mined for short intervals, I'd estimate 12hs per day.

dma88

member

Activity: 117

Merit: 10

Quote from: ivanlabrie on September 09, 2013, 05:11:20 AM

Quote from: Quirlorimbo on September 09, 2013, 03:40:07 AM

Quote from: Roger3636 on September 09, 2013, 03:32:56 AM

Quote from: geofflosophy on September 09, 2013, 03:18:39 AM

tried running the primeminer on the beeeeer thread but it crashed on me. Anyone have it working with any of the jhPrimeminer versions?

it crashed because the server was down .. should work ok now servers back up

in the op
http://www.ppcointalk.org/index.php?topic=485.0 is a .diff file attached to the post.

it will fix the getwork protocol for mumus 7.x ...

The less technically inclined will have to live with pre compiled win binaries (cough me cough) Sad

I'm in the same boat, i can't code. I tried using the various jhPrimeiners with beeeeer, no luck since they all used getwork. I'm trying out beer bc apparently it's better for smaller (single cpu) miners. and it's always good to support new pools. xolo's miner seems to work about as fast as ypool's, I''m getting ~1.5xpm/day on my 6-core. some ppl said they got 3x more mining at beer, do they have jhprimeminer patched with the diff file? or is it just more stuff that's over my head lol

tandyuk

newbie

Activity: 28

Merit: 0

Due to the issues some people have been having with my jsonrpc mod, I have made some changes to my repo.

https://github.com/tandyuk/jhPrimeminer

The master branch is now a plain fork of Rdebourbon's 3.3 for linux.
This can be downloaded using "git clone https://github.com/tandyuk/jhPrimeminer.git"
All the extra headers have been removed, and I have updated the readme and makefiles accordingly.

My json rpc code has been moved to its own branch, and can be downloaded by instead using
"git clone --branch jsonrpc https://github.com/tandyuk/jhPrimeminer.git"

As always, donations are greatfully recieved.

Happy mining

refer_2_me

full member

Activity: 213

Merit: 100

Quote from: one4many on September 16, 2013, 09:33:35 AM

Quote from: refer_2_me on September 16, 2013, 08:37:48 AM

Quote from: one4many on September 16, 2013, 08:35:22 AM

Quote from: sva_h4cky0 on September 16, 2013, 07:37:09 AM

Quote from: refer_2_me on September 16, 2013, 06:38:57 AM

Quote from: brampower on September 12, 2013, 10:31:55 PM

Quote from: ?? on ??

Quote from: brampower on September 12, 2013, 10:07:57 PM

Is there any way to check the current balance of your account on Beeeer, or do you just wait until you get paid out?

You can see it on the payout pages.
But it's not very convenient.

Thanks. Even on the latest payout, my address is not there though? Where exactly am I supposed to see it?

**EDIT: I get it now. Thanks for your help

Sy on ppcointalk made this really cool stats page: http://xpm.syware.de/?address=0 Put your payout address in the URL.

great

http://xpm.syware.de/?address=YOURXPMADDRESS

Except for the big error message:

as sva_h4cky0 mentioned, you need to put in your own payout address into the URL. Like this (not my address): http://xpm.syware.de/?address=AbB7cgdEXr3hJ254qFW1QqAecLGfW9XyGU

Yes, I get it .... but I get the error instead of some nice page .. look for yourself: http://xpm.syware.de/?address=AZRU4BQmTUyfdKTFo9Xhm3nxeLruJJ7N8Q

Have you mined valid shared on beeeeer yet? The stats page will only work after you have.

one4many

hero member

Activity: 516

Merit: 500

Quote from: refer_2_me on September 16, 2013, 08:37:48 AM

Quote from: one4many on September 16, 2013, 08:35:22 AM

Quote from: sva_h4cky0 on September 16, 2013, 07:37:09 AM

Quote from: refer_2_me on September 16, 2013, 06:38:57 AM

Quote from: brampower on September 12, 2013, 10:31:55 PM

Quote from: ?? on ??

Quote from: brampower on September 12, 2013, 10:07:57 PM

Is there any way to check the current balance of your account on Beeeer, or do you just wait until you get paid out?

You can see it on the payout pages.
But it's not very convenient.

Thanks. Even on the latest payout, my address is not there though? Where exactly am I supposed to see it?

**EDIT: I get it now. Thanks for your help

Sy on ppcointalk made this really cool stats page: http://xpm.syware.de/?address=0 Put your payout address in the URL.

great

http://xpm.syware.de/?address=YOURXPMADDRESS

Except for the big error message:

as sva_h4cky0 mentioned, you need to put in your own payout address into the URL. Like this (not my address): http://xpm.syware.de/?address=AbB7cgdEXr3hJ254qFW1QqAecLGfW9XyGU

Yes, I get it .... but I get the error instead of some nice page .. look for yourself: http://xpm.syware.de/?address=AZRU4BQmTUyfdKTFo9Xhm3nxeLruJJ7N8Q

refer_2_me

full member

Activity: 213

Merit: 100

Quote from: one4many on September 16, 2013, 08:35:22 AM

Quote from: sva_h4cky0 on September 16, 2013, 07:37:09 AM

Quote from: refer_2_me on September 16, 2013, 06:38:57 AM

Quote from: brampower on September 12, 2013, 10:31:55 PM

Quote from: ?? on ??

Quote from: brampower on September 12, 2013, 10:07:57 PM

Is there any way to check the current balance of your account on Beeeer, or do you just wait until you get paid out?

You can see it on the payout pages.
But it's not very convenient.

Thanks. Even on the latest payout, my address is not there though? Where exactly am I supposed to see it?

**EDIT: I get it now. Thanks for your help

Sy on ppcointalk made this really cool stats page: http://xpm.syware.de/?address=0 Put your payout address in the URL.

great

http://xpm.syware.de/?address=YOURXPMADDRESS

Except for the big error message:

as sva_h4cky0 mentioned, you need to put in your own payout address into the URL. Like this (not my address): http://xpm.syware.de/?address=AbB7cgdEXr3hJ254qFW1QqAecLGfW9XyGU

one4many

hero member

Activity: 516

Merit: 500

Quote from: sva_h4cky0 on September 16, 2013, 07:37:09 AM

Quote from: refer_2_me on September 16, 2013, 06:38:57 AM

Quote from: brampower on September 12, 2013, 10:31:55 PM

Quote from: ?? on ??

Quote from: brampower on September 12, 2013, 10:07:57 PM

Is there any way to check the current balance of your account on Beeeer, or do you just wait until you get paid out?

You can see it on the payout pages.
But it's not very convenient.

Thanks. Even on the latest payout, my address is not there though? Where exactly am I supposed to see it?

**EDIT: I get it now. Thanks for your help

Sy on ppcointalk made this really cool stats page: http://xpm.syware.de/?address=0 Put your payout address in the URL.

great

http://xpm.syware.de/?address=YOURXPMADDRESS

Except for the big error message:

sva_h4cky0

sr. member

Activity: 308

Merit: 250

onore dikeido

Quote from: refer_2_me on September 16, 2013, 06:38:57 AM

Quote from: brampower on September 12, 2013, 10:31:55 PM

Quote from: ?? on ??

Quote from: brampower on September 12, 2013, 10:07:57 PM

Is there any way to check the current balance of your account on Beeeer, or do you just wait until you get paid out?

You can see it on the payout pages.
But it's not very convenient.

Thanks. Even on the latest payout, my address is not there though? Where exactly am I supposed to see it?

**EDIT: I get it now. Thanks for your help

Sy on ppcointalk made this really cool stats page: http://xpm.syware.de/?address=0 Put your payout address in the URL.

great

http://xpm.syware.de/?address=YOURXPMADDRESS

refer_2_me

full member

Activity: 213

Merit: 100

Quote from: brampower on September 12, 2013, 10:31:55 PM

Quote from: ?? on ??

Quote from: brampower on September 12, 2013, 10:07:57 PM

Is there any way to check the current balance of your account on Beeeer, or do you just wait until you get paid out?

You can see it on the payout pages.
But it's not very convenient.

Thanks. Even on the latest payout, my address is not there though? Where exactly am I supposed to see it?

**EDIT: I get it now. Thanks for your help

Sy on ppcointalk made this really cool stats page: http://xpm.syware.de/?address=0 Put your payout address in the URL.

hacko.bg

newbie

Activity: 52

Merit: 0

Quote from: mumus on July 31, 2013, 09:31:36 AM

Quote from: zax983 on July 31, 2013, 09:20:19 AM

I'm sure, you will ignore this quest... But can you make any like this for solo?

Support for solo mining is planned and is in progress.

Hello, as difficulty continues to rise, this question started to bothers me more and more. (and I'm sure not only me) Is there any development over the solo mining usage of jhPrimeminer?

ivanlabrie

hero member

Activity: 812

Merit: 1000

Quote from: TheSpiral on September 14, 2013, 06:13:01 PM

Quote from: dma88 on September 13, 2013, 05:13:43 PM

Quote from: refer_2_me on September 11, 2013, 12:36:17 PM

Quote from: maco on September 11, 2013, 12:28:56 PM

Quote from: refer_2_me on September 11, 2013, 12:02:49 PM

Quote from: Mapuo on September 10, 2013, 03:30:13 PM

Stil nothing from beeeer in my wallet. Only 0.1XPM butttt...

Has anyone been able to use the beeeeer miner to mine on ypool? It mines much faster for me.

Where is this at?

beeeeer.org

where's the link to the miner?

http://beeeeer.org/

Not there, but here: http://www.ppcointalk.org/index.php?topic=485.0

TheSpiral

full member

Activity: 322

Merit: 113

Sinbad Mixer: Mix Your BTC Quickly

Quote from: dma88 on September 13, 2013, 05:13:43 PM

Quote from: refer_2_me on September 11, 2013, 12:36:17 PM

Quote from: maco on September 11, 2013, 12:28:56 PM

Quote from: refer_2_me on September 11, 2013, 12:02:49 PM

Quote from: Mapuo on September 10, 2013, 03:30:13 PM

Stil nothing from beeeer in my wallet. Only 0.1XPM butttt...

Has anyone been able to use the beeeeer miner to mine on ypool? It mines much faster for me.

Where is this at?

beeeeer.org

where's the link to the miner?

http://beeeeer.org/

rlhead7173

member

Activity: 109

Merit: 10

Quote from: Quirlorimbo on September 13, 2013, 11:36:21 PM

Quote from: dma88 on September 13, 2013, 05:13:43 PM

Quote from: refer_2_me on September 11, 2013, 12:36:17 PM

Quote from: maco on September 11, 2013, 12:28:56 PM

Quote from: refer_2_me on September 11, 2013, 12:02:49 PM

Quote from: Mapuo on September 10, 2013, 03:30:13 PM

Stil nothing from beeeer in my wallet. Only 0.1XPM butttt...

Has anyone been able to use the beeeeer miner to mine on ypool? It mines much faster for me.

Where is this at?

beeeeer.org

where's the link to the miner?

Client / Miner:
bitbucket: source
github: source
windows binary: primeminer v0.2 *beta*
(contains 32 and 64 bit version)

today the newer v0.3 for windows will be released

Are those suppose to be hyperlinks? I am not too sure were to get the miner for beeeeer.org.

Quirlorimbo

member

Activity: 89

Merit: 10

Quote from: dma88 on September 13, 2013, 05:13:43 PM

Quote from: refer_2_me on September 11, 2013, 12:36:17 PM

Quote from: maco on September 11, 2013, 12:28:56 PM

Quote from: refer_2_me on September 11, 2013, 12:02:49 PM

Quote from: Mapuo on September 10, 2013, 03:30:13 PM

Stil nothing from beeeer in my wallet. Only 0.1XPM butttt...

Has anyone been able to use the beeeeer miner to mine on ypool? It mines much faster for me.

Where is this at?

beeeeer.org

where's the link to the miner?

Client / Miner:
bitbucket: source
github: source
windows binary: primeminer v0.2 *beta*
(contains 32 and 64 bit version)

today the newer v0.3 for windows will be released

dma88

member

Activity: 117

Merit: 10

Quote from: refer_2_me on September 11, 2013, 12:36:17 PM

Quote from: maco on September 11, 2013, 12:28:56 PM

Quote from: refer_2_me on September 11, 2013, 12:02:49 PM

Quote from: Mapuo on September 10, 2013, 03:30:13 PM

Stil nothing from beeeer in my wallet. Only 0.1XPM butttt...

Has anyone been able to use the beeeeer miner to mine on ypool? It mines much faster for me.

Where is this at?

beeeeer.org

where's the link to the miner?

mhps

hero member

Activity: 516

Merit: 500

CAT.EX Exchange

Quote from: rdebourbon on September 13, 2013, 09:28:29 AM

Quote from: mhps on September 13, 2013, 04:45:17 AM

Quote from: rdebourbon on September 13, 2013, 02:45:24 AM

Or run with -bttarget 8 as thats effectively what 3.2 was doing.. You may well get more shares but will reduce blocks..

Do you mean v3.2 doesn't find 9-chains? I have found quite a few 9s with it. Sometimes the miner didn't find 9s I just restart the miner to sort of fix it. Or is it that 3.2 finds unproportionally more 8s?

The sieve is actually a combination of three filters .. A full length cc1 filter, a full length cc2 filter and bitwin filter.. All 3 are meant to target block length.. In 3.2 the bitwin filter has a bug that means odd length targets are filtered on the previous even target..

Currently network difficulty is 9.. So 3.2 was filtering for 9ch cc1 & cc2, but the bitwin filter was filtering on 8ch bitwins not 9ch..

As the length increases the number of potential candidates diminishes rapidly, meaning a faster sieve but a longer search.. Because yPool accepts any chain of at least 6ch, the "extra" bitwins that 3.2 returned would equal additional shares that 3.3 would not find because it would filter then out much earlier in the process..

Both miners are heavily optimized, and will find 9ch and more.. But while 3.2 may have a higher share rate.. 3.3 has a higher block rate..

Thanks for the explanation!

rdebourbon

member

Activity: 65

Merit: 10

Quote from: mhps on September 13, 2013, 04:45:17 AM

Quote from: rdebourbon on September 13, 2013, 02:45:24 AM

Or run with -bttarget 8 as thats effectively what 3.2 was doing.. You may well get more shares but will reduce blocks..

Do you mean v3.2 doesn't find 9-chains? I have found quite a few 9s with it. Sometimes the miner didn't find 9s I just restart the miner to sort of fix it. Or is it that 3.2 finds unproportionally more 8s?

The sieve is actually a combination of three filters .. A full length cc1 filter, a full length cc2 filter and bitwin filter.. All 3 are meant to target block length.. In 3.2 the bitwin filter has a bug that means odd length targets are filtered on the previous even target..

Currently network difficulty is 9.. So 3.2 was filtering for 9ch cc1 & cc2, but the bitwin filter was filtering on 8ch bitwins not 9ch..

As the length increases the number of potential candidates diminishes rapidly, meaning a faster sieve but a longer search.. Because yPool accepts any chain of at least 6ch, the "extra" bitwins that 3.2 returned would equal additional shares that 3.3 would not find because it would filter then out much earlier in the process..

Both miners are heavily optimized, and will find 9ch and more.. But while 3.2 may have a higher share rate.. 3.3 has a higher block rate..

Topic: [XPM]unofficial jhPrimeminer thread - page 14. (Read 180246 times)