@NotFuzzyWarm
Unfortunately the first post does not say anything about wallets, if we can use one from Binance or Bitcoin Wallet for example.
Topic: [∞ YH] solo.ckpool.org 2% fee solo mining 256 blocks solved! - page 107. (Read 102344 times)
November 17, 2022, 06:02:13 AM
November 16, 2022, 09:01:07 PM
yes.
As is true in all Forums, the 1st post covers everything you need to know...
As is true in all Forums, the 1st post covers everything you need to know...
November 16, 2022, 08:25:23 PM
Hello everyone, I would like to know if a Bitcoin Wallet wallet address can be used for mining here in the pool? Thanks.
November 16, 2022, 01:49:35 PM
There are 2 slots open for run #003 on BLOCK SOLVERS group which will be launched with 5 PH/s. Stake is only 0.001 BTC (=1mBTC)
November 16, 2022, 01:42:27 PM
no block found in Blockparty Run 27, now plan the next one
here ist the topic for our Blockparty Run 28
##############################################
here ist the topic for our Blockparty Run 28
##############################################
Hello Willi
Hope you are doing good !
Any update about the next run ?
if no more users want to try, then the idea would be to invest the remaining budget of the reservations in a run. If we find a block then, will be divided proportionally of the invest.
or we wait...
PS: next week im on holiday...
November 16, 2022, 01:38:32 PM
no block found in Blockparty Run 27, now plan the next one
here ist the topic for our Blockparty Run 28
##############################################
here ist the topic for our Blockparty Run 28
##############################################
Hello Willi
Hope you are doing good !
Any update about the next run ?
November 12, 2022, 10:45:18 PM
I don't understand why my ckpool shows different parameters than the Antminer:
In Antminer the following parameters come out:
[minerPool] [minerPoolTip] Diff Priority Accepted DiffA DiffR Rejected Stale LSDiff LSTime
But none of this matches CKPOOL, anyone who can make me understand this, also it would be nice to know what each Antiminer parameter indicates, I find information but it is not well explained.
Thank you very much in advance
In Antminer the following parameters come out:
[minerPool] [minerPoolTip] Diff Priority Accepted DiffA DiffR Rejected Stale LSDiff LSTime
But none of this matches CKPOOL, anyone who can make me understand this, also it would be nice to know what each Antiminer parameter indicates, I find information but it is not well explained.
Thank you very much in advance
I do not use Antminer pool and Antminer mining program. I just guess.
Diff may be network difficulty.\
Proority ?
Accepted may be how many numbers of acceptance of your submit to the pool.
Rejected may be how many numbbers of rejection of your submit to the pool.
DiffA: sum of all difficulty of accpted submit to the pool.
DiffR: sum of all difficulty of rejected submit to pool.
Actually useful information for a transparency for pool and miners, I believe, are:
Network current Difficulty, eg 36.8T
Last accpeted submit's difficulty by the pool, and when
Maximum accpeted submit's difficulty by the pool, and when
Number of accepted submit.
Number of rejected submit.
Other statistic?
November 11, 2022, 06:10:23 AM
I don't understand why my ckpool shows different parameters than the Antminer:
In Antminer the following parameters come out:
[minerPool] [minerPoolTip] Diff Priority Accepted DiffA DiffR Rejected Stale LSDiff LSTime
But none of this matches CKPOOL, anyone who can make me understand this, also it would be nice to know what each Antiminer parameter indicates, I find information but it is not well explained.
Thank you very much in advance
In Antminer the following parameters come out:
[minerPool] [minerPoolTip] Diff Priority Accepted DiffA DiffR Rejected Stale LSDiff LSTime
But none of this matches CKPOOL, anyone who can make me understand this, also it would be nice to know what each Antiminer parameter indicates, I find information but it is not well explained.
Thank you very much in advance
November 08, 2022, 09:29:48 AM
The link you referred to means "SOLO mining on an own full-node". In this case you are using solo.ckpool.org and you can use a bc1q... address of course. Just look at so many posting, a lot of users mining on soloCK pool with Bech32 address. In case it would not have been supported, you would have received an error message 
All good, you are ready to mine
All right, thanks a lot for your reply! All good, you are ready to mine 
November 07, 2022, 03:34:45 PM
I copied and pasted the url. But, for the username. I don't know the worker name(s), so I just put my BTC address; since it said I could do it without the worker name(s). Then I put x for the password. It still shows inactive.
Make sure you don't have any extra characters or spaces in your BTC address.
Also once you save and if you have it setup correctly in the Apollo Gui then make sure you click on Miner and then click start and you should be mining.
If not then it could be your network / router blocking you from mining or your apollo is not working correctly in which case you should head to the Apollo support thread here in the hardware area https://bitcointalksearch.org/topic/official-futurebit-apollo-btc-softwareimage-and-support-thread-5340015
November 07, 2022, 02:05:40 PM
The link you referred to means "SOLO mining on an own full-node". In this case you are using solo.ckpool.org and you can use a bc1q... address of course. Just look at so many posting, a lot of users mining on soloCK pool with Bech32 address. In case it would not have been supported, you would have received an error message All good, you are ready to mine
All good, you are ready to mine November 07, 2022, 01:54:06 PM
When I point my USB-Miner (GekkoScience Newpac) to solo.ckpool.org and I'm running cgminer as mining-software, is it technical possible to use a Bech32-adress as payout-adress 
I am refering to this post https://bitcointalksearch.org/topic/solomining-with-cgminer-against-bitcoind-bitcoin-core-v0181-5373190 where user 100knot2dae said cgminer does not support Bech (bc1...) addresses for solo mining.
So this command in cgminer would not work?!
I am refering to this post https://bitcointalksearch.org/topic/solomining-with-cgminer-against-bitcoind-bitcoin-core-v0181-5373190 where user 100knot2dae said cgminer does not support Bech (bc1...) addresses for solo mining.
So this command in cgminer would not work?!
Code:
sudo ./cgminer -o stratum+tcp://solo.ckpool.org:3333 -u bc1q-my-btc-payout-adress.gekko -p x --suggest-diff 256 --gekko-newpac-freq 400
November 07, 2022, 02:22:13 AM
New to this. Bought a futurebit apollo btc to try it out. It keeps showing inactive for my status connection to ckpool. Does anyone know why?
You must have your pool configured incorrectly.
Use this as your pool url:
stratum+tcp://solo.ckpool.org:3333
Then enter your BTC address . miner name... For an example on the Username if my worker name was ApolloBTC01 I would enter bc1qzmntuax0kgys5elzwcn6sj04yxxxxxxx.ApolloBTC01
And enter a lower case x as the password.
Then save and restart the apollo and you should be mining.
I copied and pasted the url. But, for the username. I don't know the worker name(s), so I just put my BTC address; since it said I could do it without the worker name(s). Then I put x for the password. It still shows inactive.
November 03, 2022, 07:13:42 AM
Looking through the logs I can see one miner submitting mostly rejects - all below target level, suggesting dodgy firmware on his hardware, but I don't see anything else untoward. That might be enough on its own. I suggest each individual user check their own stats and see if their hashrate at the pool reflects their hardware - ckpool reports hashrate based ONLY on accepted shares.
Reviewing one of my miners, he has been mining in CKPool for 18 days and yields the following data:
Diff Priorit Accepted DiffA DiffR Rejected Stale LSDiff LSTime
105K 0 458879 38400602087 19012175 227 22 104698 0:00:00
Would it be possible to get a screenshot of what my miner is doing?
I try to look for information in Spanish about what the miner actually does, what data it takes into account, the Hashes it sends but I can't find any information about this.
November 02, 2022, 02:48:56 PM
Solo miners - Attention
If you are interested in group based solo runs, you are welcome to join the BLOCK SOLVERS group
Stake is only 0.001 BTC, we rent hashpower 2-3 PH/s and send it to soloCK pool. The motto of this solo mining group is: participate cheaply and regularly with the hope of mining a block and collecting the reward.
All info can be found in the citb0in Solo-Mining Group - BLOCK SOLVERS thread. Join now, may the luck be with us
If you are interested in group based solo runs, you are welcome to join the BLOCK SOLVERS group
Stake is only 0.001 BTC, we rent hashpower 2-3 PH/s and send it to soloCK pool. The motto of this solo mining group is: participate cheaply and regularly with the hope of mining a block and collecting the reward.
All info can be found in the citb0in Solo-Mining Group - BLOCK SOLVERS thread. Join now, may the luck be with us
November 02, 2022, 02:06:43 PM
Looking through the logs I can see one miner submitting mostly rejects - all below target level, suggesting dodgy firmware on his hardware, but I don't see anything else untoward. That might be enough on its own. I suggest each individual user check their own stats and see if their hashrate at the pool reflects their hardware - ckpool reports hashrate based ONLY on accepted shares.
Thank you for the info ck. That's good to know. So if the difficulty is too low on a particular miner, even one with a relatively low hash rate, it's possible to rack up a large amount of rejected shares. That's good to know!
November 02, 2022, 07:57:19 AM
New to this. Bought a futurebit apollo btc to try it out. It keeps showing inactive for my status connection to ckpool. Does anyone know why?
You must have your pool configured incorrectly.
Use this as your pool url:
stratum+tcp://solo.ckpool.org:3333
Then enter your BTC address . miner name... For an example on the Username if my worker name was ApolloBTC01 I would enter bc1qzmntuax0kgys5elzwcn6sj04yxxxxxxx.ApolloBTC01
And enter a lower case x as the password.
Then save and restart the apollo and you should be mining.
November 02, 2022, 01:50:45 AM
New to this. Bought a futurebit apollo btc to try it out. It keeps showing inactive for my status connection to ckpool. Does anyone know why?
November 01, 2022, 11:14:22 PM
Looking through the logs I can see one miner submitting mostly rejects - all below target level, suggesting dodgy firmware on his hardware, but I don't see anything else untoward. That might be enough on its own. I suggest each individual user check their own stats and see if their hashrate at the pool reflects their hardware - ckpool reports hashrate based ONLY on accepted shares.
November 01, 2022, 03:48:15 PM
Question for you all. I was looking at the solo pool stats and noticed the number of rejected shares versus total shares accepted.
"accepted": 24575964250308, "rejected": 8543041616789,
Is it normal to have such a high ratio of rejected to accepted shares? It's almost 35%.
Just curious...
It's not normal, it's likely shitty asic firmware. If the reported hashrate is still fine and consistent with the hardware then just ignore it, it means it's submitting shares below difficulty or something stupid."accepted": 24575964250308, "rejected": 8543041616789,
Is it normal to have such a high ratio of rejected to accepted shares? It's almost 35%.
Just curious...
So there's enough shitty firmware out there running in miners solo mining on this pool to cause over 1/3 of the total shares submitted by the entire solo pool to be rejected? That seems crazy! I could understand if a small portion of the miners connected to the pool had that issue but over 1/3 of our shares submitted are being rejected. Is this due to rentals maybe?
I'm not an expert by any stretch in this area which is why I'm trying to understand more about it. It just seems like a very gross inefficiency if 1/3 of our total shares on the solo pool as a whole are being rejected.
Thank you ck. I'm curious what you find. Looking at it today, rejected total seems to still be ticking up quickly. If our average hash rate since the last block was let's say 15PH, it's concerning if we, as a "pool", had 5PH worth of those shares rejected. Something just doesn't seem right but again, I'm not an expert in this.
Jump to: