[∞ YH] solo.ckpool.org 2% fee solo mining USA/DE 255 blocks solved! - page 272.

vh

hero member

Activity: 699

Merit: 666

Quote from: -ck on December 16, 2015, 03:54:52 AM

Quote from: vh on December 16, 2015, 03:47:50 AM

cool wish list. kind of doubt it is possible, but worth asking.

with kano.is and solo.ckpool.org sharing the same code base,
in the future, is it possible to add to a ckpool -p (local middleman) the ability to split active hashing power to each pool?
configurable : 50/50, 80/20, etc. transparent to the src miner.

No. This is something you do at the miner end. Cgminer has had a multitude of failover/balancing/quota options for YEARS to do what you want.

I suppose it can be solved with a better GUI. I might send bitmain a feature request. Undecided

willi9974

legendary

Activity: 3500

Merit: 2792

Enjoy 500% bonus + 70 FS

Quote from: -ck on December 16, 2015, 04:11:28 AM

Question for the solo users out there: Is there demand for extra solo pools in other parts of the world? I can set up a China and Germany based solo pool now as well. Anyone interested?

Yes Germany

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Question for the solo users out there: Is there demand for extra solo pools in other parts of the world? I can set up a China and Germany based solo pool now as well. Anyone interested?

vh

hero member

Activity: 699

Merit: 666

It was more in line for those of us with a single Antminer, S series with GUI and no shell.

zOU

hero member

Activity: 728

Merit: 500

★ these are stars ★

Quote from: vh on December 16, 2015, 03:47:50 AM

cool wish list. kind of doubt it is possible, but worth asking.

with kano.is and solo.ckpool.org sharing the same code base,
in the future, is it possible to add to a ckpool -p (local middleman) the ability to split active hashing power to each pool?
configurable : 50/50, 80/20, etc. transparent to the src miner.

I think these are the settings you are looking for. Changing "url" to "quota" and specifying the amounts in the format "AMOUNT;URL". It makes it easier to use percents, but it isn't a requirement. For example you could use a quota of 8 for pool1 and 2 for pool2.

...
"pools" : [
{
"quota" : "80;http://pool1",
"user" : "user1",
"pass" : "123"
},
{
"quota" : "20;http://pool2",
"user" : "user2",
"pass" : "123"
}
]
,
"load-balance" : true,
...

(I just googled cgminer pool balance)

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: vh on December 16, 2015, 03:47:50 AM

cool wish list. kind of doubt it is possible, but worth asking.

with kano.is and solo.ckpool.org sharing the same code base,
in the future, is it possible to add to a ckpool -p (local middleman) the ability to split active hashing power to each pool?
configurable : 50/50, 80/20, etc. transparent to the src miner.

No. This is something you do at the miner end. Cgminer has had a multitude of failover/balancing/quota options for YEARS to do what you want.

BannedDK

member

Activity: 109

Merit: 10

Quote from: vh on December 16, 2015, 03:47:50 AM

cool wish list. kind of doubt it is possible, but worth asking.

with kano.is and solo.ckpool.org sharing the same code base,
in the future, is it possible to add to a ckpool -p (local middleman) the ability to split active hashing power to each pool?
configurable : 50/50, 80/20, etc. transparent to the src miner.

I like this idea! Would be so cool Shocked

vh

hero member

Activity: 699

Merit: 666

cool wish list. kind of doubt it is possible, but worth asking.

with kano.is and solo.ckpool.org sharing the same code base,
in the future, is it possible to add to a ckpool -p (local middleman) the ability to split active hashing power to each pool?
configurable : 50/50, 80/20, etc. transparent to the src miner.

realchlorum

full member

Activity: 243

Merit: 100

I connected my broken antminer s3

Its only 180ghs but who knows..

Its also not worth to mine in a pool with it so i give it a try in your pool.

Nthused

legendary

Activity: 1554

Merit: 1001

Quote from: -ck on December 16, 2015, 01:10:35 AM

Code:

[2015-12-16 06:05:15.202] Possible block solve diff 101319884876.821548 !
[2015-12-16 06:05:15.583] BLOCK ACCEPTED!
[2015-12-16 06:05:15.584] Solved and confirmed block 388677 by 1EnFgD1z8Qhz5jLT2Dsqbf1w2pGkt5XZmD.0
[2015-12-16 06:05:15.584] User 1EnFgD1z8Qhz5jLT2Dsqbf1w2pGkt5XZmD:{"hashrate1m": "51.2T", "hashrate5m": "51.7T", "hashrate1hr": "51.9T", "hashrate1d": "25.7T", "hashrate7d": "37.3T"}
[2015-12-16 06:05:15.584] Worker 1EnFgD1z8Qhz5jLT2Dsqbf1w2pGkt5XZmD.0:{"hashrate1m": "51.2T", "hashrate5m": "51.7T", "hashrate1hr": "51.9T", "hashrate1d": "25.7T", "hashrate7d": "37.2T"}

https://www.blocktrail.com/BTC/block/00000000000000000ada0a362b78de62cfd4d85a655cd3c4e950886712c6bb3e

No Way this pool is going off !

After me thinking to rent some hash around that amount for a day and then look what happenes in the past week with block solves... just my luck as usual... maybe LTC likes me better hahahaha

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Code:

[2015-12-16 06:05:15.202] Possible block solve diff 101319884876.821548 !
[2015-12-16 06:05:15.583] BLOCK ACCEPTED!
[2015-12-16 06:05:15.584] Solved and confirmed block 388677 by 1EnFgD1z8Qhz5jLT2Dsqbf1w2pGkt5XZmD.0
[2015-12-16 06:05:15.584] User 1EnFgD1z8Qhz5jLT2Dsqbf1w2pGkt5XZmD:{"hashrate1m": "51.2T", "hashrate5m": "51.7T", "hashrate1hr": "51.9T", "hashrate1d": "25.7T", "hashrate7d": "37.3T"}
[2015-12-16 06:05:15.584] Worker 1EnFgD1z8Qhz5jLT2Dsqbf1w2pGkt5XZmD.0:{"hashrate1m": "51.2T", "hashrate5m": "51.7T", "hashrate1hr": "51.9T", "hashrate1d": "25.7T", "hashrate7d": "37.2T"}

https://www.blocktrail.com/BTC/block/00000000000000000ada0a362b78de62cfd4d85a655cd3c4e950886712c6bb3e

HerbPean

legendary

Activity: 1638

Merit: 1005

Pool 0 message: Block 388677 solved by 1EnFgD1z8Qhz5jLT2Dsqbf1w2pGkt5XZmD

{"hashrate1m": "51.9T", "hashrate5m": "51.8T", "hashrate1hr": "51.9T", "hashrate1d": "25.8T", "hashrate7d": "37.3T", "lastupdate": 1450246064, "workers": 190, "shares": 39886259839, "bestshare": 2009269.7112548179, "bestever": 101319884876}

Congrats !

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: iglasses on December 15, 2015, 11:24:16 PM

Awesome! It's screaming...

{"hashrate1m": "1.41T", "hashrate5m": "1.39T", "hashrate1hr": "533G", "hashrate1d": "60.4G", "hashrate7d": "12.1G", "lastupdate": 1450239584, "shares": 1824885, "bestshare": 2709525.9528882345, "bestever": 2709525}

I have another 800g tube but I'm going to make a separate wallet address so I can monitor them individually.

Thanks again

No problem. Good luck to you. Others with tubes and prisma are also welcome to use this port for their mining pleasure.

Keep on mining.

iglasses

legendary

Activity: 1148

Merit: 1000

Awesome! It's screaming...

{"hashrate1m": "1.41T", "hashrate5m": "1.39T", "hashrate1hr": "533G", "hashrate1d": "60.4G", "hashrate7d": "12.1G", "lastupdate": 1450239584, "shares": 1824885, "bestshare": 2709525.9528882345, "bestever": 2709525}

I have another 800g tube but I'm going to make a separate wallet address so I can monitor them individually.

Thanks again

ig

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: iglasses on December 15, 2015, 08:50:13 PM

Quote from: -ck on December 15, 2015, 06:53:06 PM

What miner is that? If it's asicminer tubes, their stratum is broken and will need a special proxy setup to work (which I can do on the pool via another port if needed).

Ya it's a Prisma 2.0
Let me know what to do and I will swap it back in. Would love to hit the lottery with this puppy

I set up a special proxy for tubes/prisma on port 3335 that would combine and sanitise the stratum from these devices. It means they'll only be recognised by username (so no full workername details) but you can mine with them and monitor them collectively under your username as the worker (i.e. your bitcoin address)

Instead of the usual port, just point your miners to: solo.ckpool.org:3335
and tell me how you go.

EDIT: I see you have connected already. I forgot to mention, you need to wait a few minutes for the proxy to properly redirect and recognise them before their hashrate will show up under your user.

iglasses

legendary

Activity: 1148

Merit: 1000

Quote from: -ck on December 15, 2015, 06:53:06 PM

Quote from: iglasses on December 15, 2015, 03:06:51 PM

I am seeing huge differences in what my miner is showing and what the site is. 1300Ghs on miner.....120G on the site.

This is after 12+ hours.

is this normal? I know the miner is hashing because I can see the wattage being pulled.

What miner is that? If it's asicminer tubes, their stratum is broken and will need a special proxy setup to work (which I can do on the pool via another port if needed).

Ya it's a Prisma 2.0
Let me know what to do and I will swap it back in. Would love to hit the lottery with this puppy

Thx!

ig

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: iglasses on December 15, 2015, 03:06:51 PM

I am seeing huge differences in what my miner is showing and what the site is. 1300Ghs on miner.....120G on the site.

This is after 12+ hours.

is this normal? I know the miner is hashing because I can see the wattage being pulled.

What miner is that? If it's asicminer tubes, their stratum is broken and will need a special proxy setup to work (which I can do on the pool via another port if needed).

welshy82

member

Activity: 112

Merit: 10

Quote from: -ck on December 15, 2015, 02:32:53 PM

Quote from: welshy82 on December 15, 2015, 02:27:51 PM

hi guys can i use the same bitcoin address for 2 miners ? got 2 x s1 i wanna use but just want the one lot of stats

or do i use a _ant1 or .amt1 etc cheers all

You're expected to use the same bitcoin address for all your miners. It's entirely up to you whether you add extensions to each of them .ant1 .ant2 etc as doing so will allow you to check the stats of both of those miners separately under workers/ - you will still be able to see combined stats for both under users/

thanks ck i will put the 2 s1 as the one address so i can see the combined stats is that ok

cheers

iglasses

legendary

Activity: 1148

Merit: 1000

I am seeing huge differences in what my miner is showing and what the site is. 1300Ghs on miner.....120G on the site.

This is after 12+ hours.

is this normal? I know the miner is hashing because I can see the wattage being pulled.

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: welshy82 on December 15, 2015, 02:27:51 PM

hi guys can i use the same bitcoin address for 2 miners ? got 2 x s1 i wanna use but just want the one lot of stats

or do i use a _ant1 or .amt1 etc cheers all

You're expected to use the same bitcoin address for all your miners. It's entirely up to you whether you add extensions to each of them .ant1 .ant2 etc as doing so will allow you to check the stats of both of those miners separately under workers/ - you will still be able to see combined stats for both under users/

Topic: [∞ YH] solo.ckpool.org 2% fee solo mining USA/DE 255 blocks solved! - page 272. (Read 1514780 times)