Z-ENEMY VER 1.22 From: Dk & Enemy (z-enemy)
IMPORTANT:
For maximum performance make sure you have latest drivers (ver. 415+)
http://www.nvidia.com/Download/index.aspx
- Experimental CUDA 10 support: Higher speeds and stability, support for new RTX2080 & 2080 Ti cards
- Performance improvements: 2-5% for most algos (Hex, X16, X17, Bitcore, C11, etc..)
Cuda 10 version 32 & 64 performs faster in most algos ... Update you Nvidia drivers - minimum (ver. 415+)
Important. This is the first basic build for Cuda 10, please leave feedback in our channel #z-enemy-122test
Discord https://discord.gg/JTZm3ra
Windows:
Cuda 10.0 ( new drivers ver.415+)
x32 : https://mega.nz/#!kfxiWQ4I!Cu_gYdwk_ymtD8wDof_FPnzRH5-S4c1siOb8uxT5gmU
x64 : https://mega.nz/#!ke4yAKYR!FSF7_ykffrm0vpbaqsA4QCn0tDX3hC8EZi5zUIPql3s
Cuda 9.2 ( drivers ver 398+)
x32 : https://mega.nz/#!MG41TKjK!sHNKOBuhc-Dv6c8t0HYgKwDsXUL0106i5BI1ac2vuZ8
x64 : https://mega.nz/#!hCgEDIaJ!Zvk_XtT0JNMIHMWKpQj82PZ1FdzBgWAolnkcVa-u9Qs
Cuda 9.1 ( old drivers ver.388+)
x32 : https://mega.nz/#!YHwwHAoI!nzGtRyyZjqOtfVKHkLqyrkwAgduTk1kYjRJOV-5RMFE
x64 : https://mega.nz/#!4DgykYwa!oJ438B4qpKslASizjDJTikY_15o8eFYUPsQq20MMp9A
Linux: (HiveOS, PiMP OS , EthOS & Ubuntu)
Cuda 9.0 : https://mega.nz/#!Me5WBAaS!Gt2Zyg31KuwgTDL6ujFZUkzg0XvchLomzbcg1e7PNRw
Cuda 9.1 : https://mega.nz/#!kPwAEQZS!FO2G-xYEIFLNjWNhoz9eGrGHDBf-4qBlB2mh0n7J8UA
Cuda 9.2 : https://mega.nz/#!wfgwyaIa!4IIOCoGnWhyTHPhg6s9ovTI5lu0PWp2DZaRHpHUai0w
Cuda 10.0 : https://mega.nz/#!kPhiiKhK!Rg39XjGplhKsxPL7cxf7k1YQjEH88n6wHTcpi2usdxk
Topic: Zealot/Enemy (z-enemy) NVIDIA GPU miner (ver2.6.2 - kawpow RavenCoin). - page 15. (Read 107022 times)
October 06, 2018, 01:07:06 PM
October 05, 2018, 05:29:57 AM
So I have a strange anomaly... running 1.21 on 3 different rigs, 2 4x 1080ti and a 6 card rig mixed with 1080/1080ti.
The 4 card rigs are pretty much identical, trying to run on ZPool.
One 4 card rig starts up and gets a whole bunch of low diff shares and then gets a diff update and slows down, but finding bigger shares, all is good and right in the world of mining.
The other 2 rigs described, both start up the same, but never get a diff update and continue mining the lowest diff indefinitely...
Reboot doesn't help, newest drivers installed on all machines, I have never noticed a difference in any of these rigs until this, I'm afraid to turn off the one that's working, lol.
Anyone have any suggestions?
The 4 card rigs are pretty much identical, trying to run on ZPool.
One 4 card rig starts up and gets a whole bunch of low diff shares and then gets a diff update and slows down, but finding bigger shares, all is good and right in the world of mining.
The other 2 rigs described, both start up the same, but never get a diff update and continue mining the lowest diff indefinitely...
Reboot doesn't help, newest drivers installed on all machines, I have never noticed a difference in any of these rigs until this, I'm afraid to turn off the one that's working, lol.
Anyone have any suggestions?
I noticed this as well. Always the same rig that jumps difficulty.
October 05, 2018, 04:24:24 AM
Yea, antivirus thinks like 98% of miners are trojans.. Stick to trusted miners..
I just download from the opening post. It is safer.
October 05, 2018, 04:18:13 AM
Have issues with api. There were no issues with other miners, just typed --api 192.168.0.104:2222.
Tried all options, but no result. Can anybody type example. Just don't make me read help.txt
THX
Tried all options, but no result. Can anybody type example. Just don't make me read help.txt
THX
October 04, 2018, 10:52:26 PM
RTcore, Tensorcore are not useful for x16r. Right?
Do you plan compile CUDA 9.X with z-enemy for ubuntu?
Z-enemy is rly good performance. But set cuda path so inconvenience at ubuntu.
I hope that enemy compiled cuda realease soon.
Do you plan compile CUDA 9.X with z-enemy for ubuntu?
Z-enemy is rly good performance. But set cuda path so inconvenience at ubuntu.
I hope that enemy compiled cuda realease soon.
October 03, 2018, 07:17:01 PM
So I have a strange anomaly... running 1.21 on 3 different rigs, 2 4x 1080ti and a 6 card rig mixed with 1080/1080ti.
The 4 card rigs are pretty much identical, trying to run on ZPool.
One 4 card rig starts up and gets a whole bunch of low diff shares and then gets a diff update and slows down, but finding bigger shares, all is good and right in the world of mining.
The other 2 rigs described, both start up the same, but never get a diff update and continue mining the lowest diff indefinitely...
Reboot doesn't help, newest drivers installed on all machines, I have never noticed a difference in any of these rigs until this, I'm afraid to turn off the one that's working, lol.
Anyone have any suggestions?
The 4 card rigs are pretty much identical, trying to run on ZPool.
One 4 card rig starts up and gets a whole bunch of low diff shares and then gets a diff update and slows down, but finding bigger shares, all is good and right in the world of mining.
The other 2 rigs described, both start up the same, but never get a diff update and continue mining the lowest diff indefinitely...
Reboot doesn't help, newest drivers installed on all machines, I have never noticed a difference in any of these rigs until this, I'm afraid to turn off the one that's working, lol.
Anyone have any suggestions?
October 01, 2018, 11:09:59 AM
Do you have some data to show for it 
? Ive tried trex 0610 and zenemy 121 (not the .a) and trex was faster by a good 3% for my 1080 and 1070ti.
? Ive tried trex 0610 and zenemy 121 (not the .a) and trex was faster by a good 3% for my 1080 and 1070ti.You ask for a prof though at the same time you present none either. But no, I didn't make any screenshots to prove it - I was making those test for myself. Just keep in mind -i 20 is not maximum in z-enemy, I was using 21. Also I noticed that on faster sequences t-rex is faster, but on slower - zealot is. So in the end I choose to stick with t-rex anyway.
October 01, 2018, 08:38:38 AM
@enemy
Windows update to 1.21a:
Cuda 9.1 x32
Cuda 9.1 x64
Are build with Cuda 9.2. 
My mistake.
Windows update to 1.21a:
Cuda 9.1 x32
Cuda 9.1 x64
My mistake.
September 30, 2018, 03:52:40 PM
Do you plan new versions for Cuda 10 ?
thanks.
thanks.
September 29, 2018, 08:13:30 AM
Cool, now z-enemy 1.21a is faster than t-rex 0.6.10 in x16r.. though by less than 1%)
Do you have some data to show for it
? Ive tried trex 0610 and zenemy 121 (not the .a) and trex was faster by a good 3% for my 1080 and 1070ti. September 27, 2018, 02:31:18 AM
are going to optimize this miner for the Nvidia RTX 2xxx series, I already have rigs with 2080 and although it works, it does not get all the performance of the new RTX features. T-rex does not work
I believe that the first to develop full compatibility and stability, will take much of the miners. Although it works sometimes it is unstable and blocks the computer.
I'm looking forward to hearing about this
I believe that the first to develop full compatibility and stability, will take much of the miners. Although it works sometimes it is unstable and blocks the computer.
I'm looking forward to hearing about this
September 27, 2018, 12:09:21 AM
1.21a on Ubuntu 18.04:
./z-enemy: /usr/lib/x86_64-linux-gnu/libcurl.so.4: version `CURL_OPENSSL_3' not found (required by ./z-enemy)
Hi, you need to install libcurl3 instead.
Btw, anyone else notice a performance hit from 1.20? I seem to have had less MH/S and one of my gpu's crashed twice since using 1.21. Also, there seems to be missing a -t (thread) option now. But it seems like it's automatically recognizing the # of gpu's being used. Just wish this was stated for the updates!
I haven't underclocked or touched any of the speeds and running linux on nvidia 390.48 drivers with cuda 9.1. I still think 1.20 is terrific as it is!
September 26, 2018, 06:06:42 PM
1.21a on Ubuntu 18.04:
./z-enemy: /usr/lib/x86_64-linux-gnu/libcurl.so.4: version `CURL_OPENSSL_3' not found (required by ./z-enemy)
September 26, 2018, 09:37:45 AM
September 26, 2018, 09:35:15 AM
Cool, now z-enemy 1.21a is faster than t-rex 0.6.10 in x16r.. though by less than 1%)
September 26, 2018, 05:38:31 AM
Z-ENEMY VER 1.21a
From: Dk & Enemy (z-enemy)
IMPORTANT:
For maximum performance make sure you have latest drivers (ver. 398+)
http://www.nvidia.com/Download/index.aspx
- Performance and stability improvements, few bugs fixed.
- Added uptime reporting.
Same as with previous release, 32 bit version performs faster in some algos ...
Windows update to 1.21a:
Cuda 9.1 x32 : https://mega.nz/#!MaYExC7A!TUDAugUWIFAh2q-jtcU1pQAZW5k7XYxUN0T-QAeF8Dg
Cuda 9.1 x64 : https://mega.nz/#!sGREGSiQ!gskmlT32oDiB-kQhULWhAKUIxFEQiC9Y0d45p52z91k
Cuda 9.2 x32 : https://mega.nz/#!hWImwK5S!gJBcfsgztijjIxcobxkay6glb87f9daK3ZMiUNCLisE
Cuda 9.2 x64 : https://mega.nz/#!UbJymADI!WlRQuaz2oXhO2Yp0LeL2VdAbW9x_b97KCWMTOOZXTQo
Linux 1.21: (HiveOS, PiMP OS , EthOS & Ubuntu)
Cuda 9.0 : https://mega.nz/#!cXZz2AyC!dm0SjL4omW1scVTGczhtJnBMfZE7kvE2tD-1xFsI4fQ
Cuda 9.1 : https://mega.nz/#!JPI3CaZR!fmZWj58QXfDoMGjJhRu9Ta0DR8yxLCcSl2Peyom1Rbw
Cuda 9.2 : https://mega.nz/#!AXAh3KLY!SCtoHBMf4GRi_lUpATBtaAsMPYW2g5aXXAeu3uEhfwE
FTP 1.21:
Linux: (HiveOS, PiMP OS , EthOS & Ubuntu)
http://ftp://radio.r41.ru/z-enemy-1.21-cuda92.tar.gz
http://ftp://radio.r41.ru/z-enemy-1.21-cuda91.tar.gz
http://ftp://radio.r41.ru/z-enemy-1.21-cuda90.tar.gz
From: Dk & Enemy (z-enemy)
IMPORTANT:
For maximum performance make sure you have latest drivers (ver. 398+)
http://www.nvidia.com/Download/index.aspx
- Performance and stability improvements, few bugs fixed.
- Added uptime reporting.
Same as with previous release, 32 bit version performs faster in some algos ...
Windows update to 1.21a:
Cuda 9.1 x32 : https://mega.nz/#!MaYExC7A!TUDAugUWIFAh2q-jtcU1pQAZW5k7XYxUN0T-QAeF8Dg
Cuda 9.1 x64 : https://mega.nz/#!sGREGSiQ!gskmlT32oDiB-kQhULWhAKUIxFEQiC9Y0d45p52z91k
Cuda 9.2 x32 : https://mega.nz/#!hWImwK5S!gJBcfsgztijjIxcobxkay6glb87f9daK3ZMiUNCLisE
Cuda 9.2 x64 : https://mega.nz/#!UbJymADI!WlRQuaz2oXhO2Yp0LeL2VdAbW9x_b97KCWMTOOZXTQo
Linux 1.21: (HiveOS, PiMP OS , EthOS & Ubuntu)
Cuda 9.0 : https://mega.nz/#!cXZz2AyC!dm0SjL4omW1scVTGczhtJnBMfZE7kvE2tD-1xFsI4fQ
Cuda 9.1 : https://mega.nz/#!JPI3CaZR!fmZWj58QXfDoMGjJhRu9Ta0DR8yxLCcSl2Peyom1Rbw
Cuda 9.2 : https://mega.nz/#!AXAh3KLY!SCtoHBMf4GRi_lUpATBtaAsMPYW2g5aXXAeu3uEhfwE
FTP 1.21:
Linux: (HiveOS, PiMP OS , EthOS & Ubuntu)
http://ftp://radio.r41.ru/z-enemy-1.21-cuda92.tar.gz
http://ftp://radio.r41.ru/z-enemy-1.21-cuda91.tar.gz
http://ftp://radio.r41.ru/z-enemy-1.21-cuda90.tar.gz
September 24, 2018, 04:04:38 PM
have anyone try with nvidia new driver 411 yet.
it faster or not?
it faster or not?
I have the feeling it's slower, but it's hard to compare.
thank for tell us.
today im install new driver for me see little slower around 0.1-0.2 MH in hex algo
September 24, 2018, 03:55:35 AM
have anyone try with nvidia new driver 411 yet.
it faster or not?
it faster or not?
I have the feeling it's slower, but it's hard to compare.
September 23, 2018, 03:46:21 PM
which hashrate at 1070 OC on phi2 ?
September 22, 2018, 08:27:47 PM
have anyone try with nvidia new driver 411 yet.
it faster or not?
it faster or not?
Why would new gaming drivers make hashing faster? Unless the driver specifically states compute speed enhancements or miner dev optimizes their miner around a specific driver then don't even bother.
Jump to: