Topic: █▓▒░-< [ZPOOL.CA][BTC Multipool] The miners multipool >-░▒▓█ Paid 925+ BTC - page 14. (Read 217685 times)
September 07, 2016, 05:15:19 PM
need some help cracking this veltor block
September 07, 2016, 04:45:56 PM
Crackfoo, veltor is on Yobit, so is it OK to mine now with c=BTC?
Yup! Feel free to jack this into your multi algo scripts now.
September 07, 2016, 04:11:11 PM
'We have 2 coin wallets*SHA256 that require upgrading Terra and Joule, hope we don't loose BTC.
https://bitcointalksearch.org/topic/m.16148565
https://bitcointalksearch.org/topic/m.16148565
Was this corrected?
September 07, 2016, 03:38:55 PM
No, the message was to Crackfoo in a PM. I just know I don't see my messages a lot of the time so I posted in the forum as well. Sorry for the confusion.
September 07, 2016, 03:19:55 PM
Mr crackfoo I sent you a PM with a possible suggestion for the pool. Just in case you don't read your messages very often 
Hi Spiffy_1, was that post for me?
I have no new messages on the forum.
September 07, 2016, 02:55:20 PM
Mr crackfoo I sent you a PM with a possible suggestion for the pool. Just in case you don't read your messages very often
September 07, 2016, 02:36:01 PM
Crackfoo, veltor is on Yobit, so is it OK to mine now with c=BTC?
September 07, 2016, 01:21:51 PM
Starting this Friday I'll be away on holiday again for ~12 days. I'll be travelling around Belgium so will have mediocre coverage but mostly just wifi hotspots.
Does anyone know if it's easy to simply buy a sim card for an iPhone 6 and just use local providers?
Does anyone know if it's easy to simply buy a sim card for an iPhone 6 and just use local providers?
I use a no call card of this type in my last travel to Japan (with the advantage that in Japan I didn't have any limitation in consumed bandwith by the provider) and the result was really, really good. DOn't know the Belgium company, but probably you have a lot of reviews in the net.
https://www.prepaidzero.com/product/belgium-2gb-prepaid-sim/
OoO thanks for that. I'm guessing I'd need an unlocked phone as well.. hrmmm
September 07, 2016, 01:17:54 PM
Starting this Friday I'll be away on holiday again for ~12 days. I'll be travelling around Belgium so will have mediocre coverage but mostly just wifi hotspots.
Does anyone know if it's easy to simply buy a sim card for an iPhone 6 and just use local providers?
Does anyone know if it's easy to simply buy a sim card for an iPhone 6 and just use local providers?
I use a no call card of this type in my last travel to Japan (with the advantage that in Japan I didn't have any limitation in consumed bandwith by the provider) and the result was really, really good. DOn't know the Belgium company, but probably you have a lot of reviews in the net.
https://www.prepaidzero.com/product/belgium-2gb-prepaid-sim/
September 07, 2016, 12:45:58 PM
Hi!, Thanks!, good to know, soooo profitability still good.
I could put more rigs on it (a couple of gigs, that are currently mining ETH) but i'm not sure that LBC is more profitable than ETH right now.
I'll wait then
I could put more rigs on it (a couple of gigs, that are currently mining ETH) but i'm not sure that LBC is more profitable than ETH right now.
I'll wait then
yes, even if there was another 20-25GH on the pool you'd all be laughing but we're doing fairly well for the speed we're at right now.
boom, there you go. the more miners the more blocks will be found.
September 07, 2016, 10:57:57 AM
I dig is LBC why do I get the BTCD? -o stratum+tcp://lbry.mine.zpool.ca:3334 -u my lbc address -p my worker but i get the btcd???
You need to have c=LBC in your password for all your miners. Info is on the main page about using specific currencies.
-o stratum+tcp://lbry.mine.zpool.ca:3334 -u my lbc address -p my worker c=LBC??? this? and my 500+LBC is lost?
-o stratum+tcp://lbry.mine.zpool.ca:3334 -u my lbc address -p worker,c=LBC
Yes, it's been converted to BTCD already.
Details Extra Algo Diff ES** Hashrate* Reject*
ccminer/1.8.1 c=lbry lbry 1
this ？ I look
wrong. whats the exchange ticker for lbry? LBC
September 07, 2016, 10:54:49 AM
I dig is LBC why do I get the BTCD? -o stratum+tcp://lbry.mine.zpool.ca:3334 -u my lbc address -p my worker but i get the btcd???
You need to have c=LBC in your password for all your miners. Info is on the main page about using specific currencies.
-o stratum+tcp://lbry.mine.zpool.ca:3334 -u my lbc address -p my worker c=LBC??? this? and my 500+LBC is lost?
-o stratum+tcp://lbry.mine.zpool.ca:3334 -u my lbc address -p worker,c=LBC
Yes, it's been converted to BTCD already.
Details Extra Algo Diff ES** Hashrate* Reject*
ccminer/1.8.1 c=lbry lbry 1
this ？ I look
September 07, 2016, 10:48:48 AM
Starting this Friday I'll be away on holiday again for ~12 days. I'll be travelling around Belgium so will have mediocre coverage but mostly just wifi hotspots.
Does anyone know if it's easy to simply buy a sim card for an iPhone 6 and just use local providers?
Does anyone know if it's easy to simply buy a sim card for an iPhone 6 and just use local providers?
September 07, 2016, 10:44:18 AM
Hi!, Thanks!, good to know, soooo profitability still good.
I could put more rigs on it (a couple of gigs, that are currently mining ETH) but i'm not sure that LBC is more profitable than ETH right now.
I'll wait then
I could put more rigs on it (a couple of gigs, that are currently mining ETH) but i'm not sure that LBC is more profitable than ETH right now.
I'll wait then
yes, even if there was another 20-25GH on the pool you'd all be laughing but we're doing fairly well for the speed we're at right now.
September 07, 2016, 10:42:11 AM
Hi!, Thanks!, good to know, soooo profitability still good.
I could put more rigs on it (a couple of gigs, that are currently mining ETH) but i'm not sure that LBC is more profitable than ETH right now.
I'll wait then
I could put more rigs on it (a couple of gigs, that are currently mining ETH) but i'm not sure that LBC is more profitable than ETH right now.
I'll wait then
September 07, 2016, 10:17:20 AM
Hi!
Question: is it me or LBC didn't find any block in the last 12 hours?, I see no payments of any kind (any status)
and I am still mining at 0.8 GH with three rigs.
is this because of variance or the coin tanked
Question: is it me or LBC didn't find any block in the last 12 hours?, I see no payments of any kind (any status)
and I am still mining at 0.8 GH with three rigs.
is this because of variance or the coin tanked
variance grasshopper, variance. It's been 19h since last block and at current speed & diff it is estimated to find a block in 12h. I'm thinking another block will pop soon.
September 07, 2016, 10:05:25 AM
Hi!
Question: is it me or LBC didn't find any block in the last 12 hours?, I see no payments of any kind (any status)
and I am still mining at 0.8 GH with three rigs.
is this because of variance or the coin tanked
Question: is it me or LBC didn't find any block in the last 12 hours?, I see no payments of any kind (any status)
and I am still mining at 0.8 GH with three rigs.
is this because of variance or the coin tanked
September 07, 2016, 08:34:04 AM
I dig is LBC why do I get the BTCD? -o stratum+tcp://lbry.mine.zpool.ca:3334 -u my lbc address -p my worker but i get the btcd???
You need to have c=LBC in your password for all your miners. Info is on the main page about using specific currencies.
-o stratum+tcp://lbry.mine.zpool.ca:3334 -u my lbc address -p my worker c=LBC??? this? and my 500+LBC is lost?
-o stratum+tcp://lbry.mine.zpool.ca:3334 -u my lbc address -p worker,c=LBC
Yes, it's been converted to BTCD already.
I don't have this address BTCD means my LBC with BTCD is lost
You can try this and see if it works for you:
In your LBC wallet you can:
dumpprivkey
Then install BTCD wallet and import that privkey:
importprivkey
and you may be able to recover the BTCD.
September 07, 2016, 08:10:11 AM
I dig is LBC why do I get the BTCD? -o stratum+tcp://lbry.mine.zpool.ca:3334 -u my lbc address -p my worker but i get the btcd???
You need to have c=LBC in your password for all your miners. Info is on the main page about using specific currencies.
-o stratum+tcp://lbry.mine.zpool.ca:3334 -u my lbc address -p my worker c=LBC??? this? and my 500+LBC is lost?
-o stratum+tcp://lbry.mine.zpool.ca:3334 -u my lbc address -p worker,c=LBC
Yes, it's been converted to BTCD already.
I don't have this address BTCD means my LBC with BTCD is lost
September 07, 2016, 07:28:18 AM
Since yesterday everything in my wallet is calculated in SYS! I didn't make changes in my settings!
here is the screenshot
here is the screenshot
paste your command line.. im guessing its in there..
I'm using Baikal miner:
URL stratum+tcp://quark.mine.zpool.ca:4033
ALGO quark
USER 1JWTPPa47ChmGHn4LUbv35E9A1hECFXoVB
PASS x
Make sure you have your pass include your desired currency: x,c=BTC
Many wallets use the same address version and it's important you do it every time.
Tried! No change! Payments to this address remains in SYS
I just switched to multialgo on another BTC address and all is working fine by now
my current pass for the 6 algos is: x11=1,x13=1,x14=1,x15=1,qubit=1,quark=1
your miner connection actually shows:
SYS Sys (SYS) 1JWTPPa47ChmGHn4LUbv35E9A1hECFXoVB c=BSTY (78.83.*.*)
and 1JWTPPa47ChmGHn4LUbv35E9A1hECFXoVB is not a valid BSTY address so it fails that, then the first wallet to validate 1JWTPPa47ChmGHn4LUbv35E9A1hECFXoVB is SYS.
Just make sure you're using the correct setting for the address you want to get paid in or strange things can happen.
Thanks!
I forgot that I have another miner turned on - now changed the pas to c=BTC
Will see what will happen
PS: Success! My balance is again in BTC! Thanks a lot!
Jump to: