ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards - page 16.

ztex

donator

Activity: 367

Merit: 250

ZTEX FPGA Boards

Quote from: BR0KK on May 20, 2012, 10:38:37 AM

Hm now it ran for a night without any problem....
Kind of random ...

i think its my hub ..... Or my mac ....

USB errors look different. That are probably power supply instabilities. (PSU cant handle the load/gets to hot, power cables are to thin / to long, ...)

Turbor

legendary

Activity: 1022

Merit: 1000

BitMinter

Quote from: CA Coins on May 20, 2012, 09:02:37 AM

Whoa, 120MH/s? Are you thinking about sending it to Stefan for repair?

I got the offer but as long as the other chips work fine I keep it this way. It's not worth the hassle.

BR0KK

hero member

Activity: 784

Merit: 500

Hm now it ran for a night without any problem....
Kind of random ...

i think its my hub ..... Or my mac ....

One of my singles only gets about 199 MH/s. And its getting errors with that speed. But its not the one that gets kicked out of BTCMiner.

CA Coins

donator

Activity: 305

Merit: 250

Quote from: Turbor on May 19, 2012, 06:41:02 PM

Quad or single boards ? Does this happen after connection issues ? I do have one sick chip that is down 90% of the time. But this seems to be more like a defective FPGA or a board problem than an actual overheating issue. I decided to use the quad as trio. Somehow I got used to the sexy yellow light Cheesy

Edit: You can try to set -oh to 0.5 or so to see how low the boards frequency will fall down. This way you are able to still use the chip in case something is wrong + it won't hurt because the auto downclock still works. That's why I like this boards so much.

Code:

bus-0-0: ztex_ufm1_15d4-0001-02-05-1: f=208.00MHz,  errorRate=0.66%,  maxErrorRa
te=2.21%,  hashRate=206.6MH/s,  submitted 20 new nonces,  luckFactor=1.16
bus-0-0: ztex_ufm1_15d4-0001-02-06-1: f=208.00MHz,  errorRate=0.37%,  maxErrorRa
te=0.95%,  hashRate=207.2MH/s,  submitted 18 new nonces,  luckFactor=1.05
bus-0-0: ztex_ufm1_15y1-0001-02-07-1: f=212.00MHz,  errorRate=0.39%,  maxErrorRa
te=1.26%,  hashRate=211.2MH/s,  submitted 16 new nonces,  luckFactor=1.12
bus-0-0: ztex_ufm1_15y1-0001-02-07-2: f=208.00MHz,  errorRate=0.19%,  maxErrorRa
te=1.72%,  hashRate=207.6MH/s,  submitted 20 new nonces,  luckFactor=1.18
bus-0-0: ztex_ufm1_15y1-0001-02-07-3: f=120.00MHz,  errorRate=0.00%,  maxErrorRa
te=2.99%,  hashRate=120.0MH/s,  submitted 6 new nonces,  luckFactor=0.87
bus-0-0: ztex_ufm1_15y1-0001-02-07-4: f=200.00MHz,  errorRate=0.37%,  maxErrorRa
te=0.51%,  hashRate=199.3MH/s,  submitted 9 new nonces,  luckFactor=0.94
bus-0-0: poll loop time: 88ms (USB: 5ms network: 84ms)   getwork time: 366ms  su
bmit time: 373ms
Total hash rate: 1151.9 MH/s
Total submitted hash rate: 1226.0 MH/s

Whoa, 120MH/s? Are you thinking about sending it to Stefan for repair?

CA Coins

donator

Activity: 305

Merit: 250

Quote from: BR0KK on May 19, 2012, 05:20:39 PM

I have one Problem with my setup. Everything runs fine for some hours but the 2 or 3 FPGAs (of 10) get kicked out of BTCminer for "overheating" or "some other reason i can't identify".

The boards are cooled by stock Xilence or Titan heat sink.

If i restart BTCminer everything works perfect again

Its random and affects all units in the same way.

Does anyone have similar issues?

Something like this with the quads?

Code:

2012-05-03T15:59:57: 002-2: ztex_ufm1_15y1-2012-L4-A3-1: Error: Hash rate drop of 7.3% detect. This may be caused by overheating. FPGA is shut down to prevent damage.  55.0: Device disabled since 2012-05-01T19:22:53
2012-05-03T15:59:57: 002-2: ztex_ufm1_15y1-2012-L4-A3-2: Error: Hash rate drop of 7.8% detect. This may be caused by overheating. FPGA is shut down to prevent damage.  50.98564515706362: Device disabled since 2012-05-02T07:51:01
2012-05-03T15:59:57: 002-2: ztex_ufm1_15y1-2012-L4-A3-3: f=212.00MHz,  errorRate=0.00%,  maxErrorRate=4.10%,  hashRate=212.0MH/s,  submitted 19 new nonces,  luckFactor=1.00
2012-05-03T15:59:57: 002-2: ztex_ufm1_15y1-2012-L4-A3-4: f=200.00MHz,  errorRate=0.00%,  maxErrorRate=3.45%,  hashRate=200.0MH/s,  submitted 21 new nonces,  luckFactor=0.99
2012-05-03T15:59:57: 002-2: ztex_ufm1_15y1-2012-L4-B3-1: Error: Hash rate drop of 7.7% detect. This may be caused by overheating. FPGA is shut down to prevent damage.  52.0: Device disabled since 2012-05-03T05:35:39

Turbor

legendary

Activity: 1022

Merit: 1000

BitMinter

Quote from: BR0KK on May 19, 2012, 05:20:39 PM

I have one Problem with my setup. Everything runs fine for some hours but the 2 or 3 FPGAs (of 10) get kicked out of BTCminer for "overheating" or "some other reason i can't identify".

The boards are cooled by stock Xilence or Titan heat sink.

If i restart BTCminer everything works perfect again

Its random and affects all units in the same way.

Does anyone have similar issues?

Quad or single boards ? Does this happen after connection issues ? I do have one sick chip that is down 90% of the time. But this seems to be more like a defective FPGA or a board problem than an actual overheating issue. I decided to use the quad as trio. Somehow I got used to the sexy yellow light Cheesy

Edit: You can try to set -oh to 0.5 or so to see how low the boards frequency will fall down. This way you are able to still use the chip in case something is wrong + it won't hurt because the auto downclock still works. That's why I like this boards so much.

Code:

bus-0-0: ztex_ufm1_15d4-0001-02-05-1: f=208.00MHz,  errorRate=0.66%,  maxErrorRa
te=2.21%,  hashRate=206.6MH/s,  submitted 20 new nonces,  luckFactor=1.16
bus-0-0: ztex_ufm1_15d4-0001-02-06-1: f=208.00MHz,  errorRate=0.37%,  maxErrorRa
te=0.95%,  hashRate=207.2MH/s,  submitted 18 new nonces,  luckFactor=1.05
bus-0-0: ztex_ufm1_15y1-0001-02-07-1: f=212.00MHz,  errorRate=0.39%,  maxErrorRa
te=1.26%,  hashRate=211.2MH/s,  submitted 16 new nonces,  luckFactor=1.12
bus-0-0: ztex_ufm1_15y1-0001-02-07-2: f=208.00MHz,  errorRate=0.19%,  maxErrorRa
te=1.72%,  hashRate=207.6MH/s,  submitted 20 new nonces,  luckFactor=1.18
bus-0-0: ztex_ufm1_15y1-0001-02-07-3: f=120.00MHz,  errorRate=0.00%,  maxErrorRa
te=2.99%,  hashRate=120.0MH/s,  submitted 6 new nonces,  luckFactor=0.87
bus-0-0: ztex_ufm1_15y1-0001-02-07-4: f=200.00MHz,  errorRate=0.37%,  maxErrorRa
te=0.51%,  hashRate=199.3MH/s,  submitted 9 new nonces,  luckFactor=0.94
bus-0-0: poll loop time: 88ms (USB: 5ms network: 84ms)   getwork time: 366ms  su
bmit time: 373ms
Total hash rate: 1151.9 MH/s
Total submitted hash rate: 1226.0 MH/s

BR0KK

hero member

Activity: 784

Merit: 500

I have one Problem with my setup. Everything runs fine for some hours but the 2 or 3 FPGAs (of 10) get kicked out of BTCminer for "overheating" or "some other reason i can't identify".

The boards are cooled by stock Xilence or Titan heat sink.

If i restart BTCminer everything works perfect again

Its random and affects all units in the same way.

Does anyone have similar issues?

nelisky

legendary

Activity: 1540

Merit: 1002

Quote from: P_Shep on May 09, 2012, 11:04:39 PM

nelisky,

How do the bit streams in CGminer work? are they uploaded on startup? Is the path hard coded?

Bitstreams are stored alongside the cgminer binary (directory 'bitstreams'). The path is hard coded but the bitstream selection is defined in each board firmware.

Bitstreams are uploaded at startup, yes.

P_Shep

legendary

Activity: 1795

Merit: 1208

This is not OK.

nelisky,

How do the bit streams in CGminer work? are they uploaded on startup? Is the path hard coded?

ztex

donator

Activity: 367

Merit: 250

ZTEX FPGA Boards

Quote from: Turbor on May 06, 2012, 11:27:37 AM

I was able to bring chip number 3 back to life ! For all those who wondered, the board will work fine if one chip fails. Since the chip was working on arrival I refused Ztex's offer to send the board back for warranty. I was sad but it turned out that the mistake was on my side. It looks like I used a bit too much thermal grease at the wrong place. Somehow, the grease must have found a way to some components on the board or even the pins of the FPGA.

I removed the heatsink, cleaned the FPGA with ethanol and gave it a good spray of WD40. BAAAM, I'm back in business Cool

Yes, electrically conductive thermal grease should be avoided. It's something I have to add the the red warning slips.

ztex

donator

Activity: 367

Merit: 250

ZTEX FPGA Boards

Quote from: gr0bi42 on May 04, 2012, 10:32:58 AM

I'm using this USB-Hub without any problems so far. No need to power the hub.

USB hubs require some power too. If you use cascades of hubs (i.e. hubs connected to hubs) you should power every second level.

ztex

donator

Activity: 367

Merit: 250

ZTEX FPGA Boards

Quote from: pazor on May 04, 2012, 02:38:46 PM

did anyone measure the current (A) that take the 1.15x and 1.15y ztex boards ?

The power dissipation for different FPGA boards and with current bitstreams can be found on the BTCMiner homepage At 212MHz it's about 9.5W per LX150 FPGA.

julz

legendary

Activity: 1092

Merit: 1001

Unfortunately the 1.15y comes in well over the $1000AUD threshold for import to Australia without incurring customs duty and GST.. so I'll be holding off on this until the price for a quad comes down quite a bit.
I'd love to see more motherboard/daughterboard arrangements in FPGA offerings (e.g like the btcfpga quad) so that small scale miners can buy in multiple small-value shipments and build up some gear without paying too high a premium.

Turbor

legendary

Activity: 1022

Merit: 1000

BitMinter

I was able to bring chip number 3 back to life ! For all those who wondered, the board will work fine if one chip fails. Since the chip was working on arrival I refused Ztex's offer to send the board back for warranty. I was sad but it turned out that the mistake was on my side. It looks like I used a bit too much thermal grease at the wrong place. Somehow, the grease must have found a way to some components on the board or even the pins of the FPGA.

I removed the heatsink, cleaned the FPGA with ethanol and gave it a good spray of WD40. BAAAM, I'm back in business Cool

Code:

New block detected by long polling
bus-0-0: ztex_ufm1_15d4-0001-02-05-1: f=204.00MHz,  errorRate=0.00%,  maxErrorRa
te=0.50%,  hashRate=204.0MH/s,  submitted 14 new nonces,  luckFactor=0.99
bus-0-0: ztex_ufm1_15d4-0001-02-06-1: f=208.00MHz,  errorRate=0.49%,  maxErrorRa
te=1.41%,  hashRate=207.0MH/s,  submitted 10 new nonces,  luckFactor=1.01
bus-0-0: ztex_ufm1_15y1-0001-02-07-1: f=212.00MHz,  errorRate=0.18%,  maxErrorRa
te=2.26%,  hashRate=211.6MH/s,  submitted 19 new nonces,  luckFactor=0.96
bus-0-0: ztex_ufm1_15y1-0001-02-07-2: f=204.00MHz,  errorRate=0.00%,  maxErrorRa
te=0.00%,  hashRate=204.0MH/s,  submitted 14 new nonces,  luckFactor=1.03
bus-0-0: ztex_ufm1_15y1-0001-02-07-3: Error: Hash rate drop of 6.0% detect. This
 may be caused by overheating. FPGA is shut down to prevent damage.  50.0: Devic
e disabled since 2012-05-05T19:04:40
bus-0-0: ztex_ufm1_15y1-0001-02-07-4: f=200.00MHz,  errorRate=0.39%,  maxErrorRa
te=0.91%,  hashRate=199.2MH/s,  submitted 15 new nonces,  luckFactor=1.03
bus-0-0: poll loop time: 34ms (USB: 3ms network: 31ms)   getwork time: 136ms  su
bmit time: 218ms
Total hash rate: 1025.8 MH/s
Total submitted hash rate: 1025.5 MH/s
 --------
(Re)Scanning bus ...
MAC address: 0004a32dccc0
ztex_ufm1_15d4-0001-02-05: New device: bitfile=ztex_ufm1_15d4   f_default=200.00
MHz  f_max=240.00MHz  HpC=1.0H
ztex_ufm1_15d4-0001-02-05: FPGA 1: configuration time: 336 ms
ztex_ufm1_15d4-0001-02-05-1: New FPGA
ztex_ufm1_15d4-0001-02-05-1: Set frequency to 200.00MHz
Starting mining thread for bus bus-0-0
bus-0-0: ztex_ufm1_15d4-0001-02-05-1: added
MAC address: 0004a32df1c1
ztex_ufm1_15d4-0001-02-06: New device: bitfile=ztex_ufm1_15d4   f_default=200.00
MHz  f_max=240.00MHz  HpC=1.0H
ztex_ufm1_15d4-0001-02-06: FPGA 1: configuration time: 337 ms
ztex_ufm1_15d4-0001-02-06-1: New FPGA
ztex_ufm1_15d4-0001-02-06-1: Set frequency to 200.00MHz
bus-0-0: ztex_ufm1_15d4-0001-02-06-1: added
MAC address: 0004a3462b87
ztex_ufm1_15y1-0001-02-07: New device: bitfile=ztex_ufm1_15y1   f_default=200.00
MHz  f_max=240.00MHz  HpC=1.0H
ztex_ufm1_15y1-0001-02-07: FPGA 1: configuration time: 320 ms
ztex_ufm1_15y1-0001-02-07: FPGA 2: configuration time: 317 ms
ztex_ufm1_15y1-0001-02-07: FPGA 3: configuration time: 317 ms
ztex_ufm1_15y1-0001-02-07: FPGA 4: configuration time: 318 ms
ztex_ufm1_15y1-0001-02-07-1: New FPGA
ztex_ufm1_15y1-0001-02-07-1: Set frequency to 200.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-1: added
ztex_ufm1_15y1-0001-02-07-2: New FPGA
ztex_ufm1_15y1-0001-02-07-2: Set frequency to 200.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-2: added
ztex_ufm1_15y1-0001-02-07-3: New FPGA
ztex_ufm1_15y1-0001-02-07-3: Set frequency to 200.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-3: added
ztex_ufm1_15y1-0001-02-07-4: New FPGA
ztex_ufm1_15y1-0001-02-07-4: Set frequency to 200.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-4: added
3 new devices found.

Summary:
  Bus bus-0-0   : 6 miners
  Total         : 6 miners


Disconnect all devices or enter `q' for exit. Enter `h' for help.

bus-0-0: ztex_ufm1_15y1-0001-02-07-4: Using LongPolling URL http://mint.bitminte
r.com:8332/lp
bus-0-0: ztex_ufm1_15d4-0001-02-05-1: f=200.00MHz,  errorRate=0.00%,  maxErrorRa
te=0.00%,  hashRate=200.0MH/s,  submitted 5 new nonces,  luckFactor=1.79
bus-0-0: ztex_ufm1_15d4-0001-02-06-1: f=200.00MHz,  errorRate=0.00%,  maxErrorRa
te=0.00%,  hashRate=200.0MH/s,  submitted 5 new nonces,  luckFactor=1.79
bus-0-0: ztex_ufm1_15y1-0001-02-07-1: f=200.00MHz,  errorRate=0.00%,  maxErrorRa
te=0.00%,  hashRate=200.0MH/s,  submitted 1 new nonces,  luckFactor=0.36
bus-0-0: ztex_ufm1_15y1-0001-02-07-2: f=200.00MHz,  errorRate=0.00%,  maxErrorRa
te=0.00%,  hashRate=200.0MH/s,  submitted 0 new nonces,  luckFactor=0.00
bus-0-0: ztex_ufm1_15y1-0001-02-07-3: f=200.00MHz,  errorRate=0.00%,  maxErrorRa
te=0.00%,  hashRate=200.0MH/s,  submitted 4 new nonces,  luckFactor=1.44
bus-0-0: ztex_ufm1_15y1-0001-02-07-4: f=200.00MHz,  errorRate=0.00%,  maxErrorRa
te=0.00%,  hashRate=200.0MH/s,  submitted 3 new nonces,  luckFactor=1.08
bus-0-0: poll loop time: 26ms (USB: 4ms network: 22ms)   getwork time: 96ms  sub
mit time: 101ms
Total hash rate: 1200.0 MH/s
Total submitted hash rate: 1288.3 MH/s
 --------
bus-0-0: ztex_ufm1_15y1-0001-02-07-4: Set frequency to 204.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-2: Set frequency to 204.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-3: Set frequency to 204.00MHz
bus-0-0: ztex_ufm1_15d4-0001-02-05-1: Set frequency to 204.00MHz
bus-0-0: ztex_ufm1_15d4-0001-02-06-1: Set frequency to 204.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-1: Set frequency to 204.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-2: Set frequency to 208.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-3: Set frequency to 208.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-4: Set frequency to 208.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-1: Set frequency to 208.00MHz
bus-0-0: ztex_ufm1_15d4-0001-02-05-1: Set frequency to 208.00MHz
bus-0-0: ztex_ufm1_15d4-0001-02-06-1: Set frequency to 208.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-4: Set frequency to 204.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-2: Set frequency to 212.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-3: Set frequency to 212.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-1: Set frequency to 212.00MHz
bus-0-0: ztex_ufm1_15d4-0001-02-06-1: Set frequency to 212.00MHz
bus-0-0: ztex_ufm1_15d4-0001-02-05-1: Set frequency to 212.00MHz
bus-0-0: ztex_ufm1_15d4-0001-02-05-1: Set frequency to 208.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-2: Set frequency to 208.00MHz
bus-0-0: ztex_ufm1_15d4-0001-02-06-1: Set frequency to 208.00MHz
bus-0-0: ztex_ufm1_15d4-0001-02-06-1: Set frequency to 212.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-3: Set frequency to 216.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-1: Set frequency to 216.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-3: Set frequency to 212.00MHz
bus-0-0: ztex_ufm1_15d4-0001-02-06-1: Set frequency to 208.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-3: Set frequency to 216.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-1: Set frequency to 212.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-3: Set frequency to 212.00MHz
bus-0-0: ztex_ufm1_15d4-0001-02-05-1: f=208.00MHz,  errorRate=0.79%,  maxErrorRa
te=0.95%,  hashRate=206.4MH/s,  submitted 8 new nonces,  luckFactor=0.76
bus-0-0: ztex_ufm1_15d4-0001-02-06-1: f=208.00MHz,  errorRate=0.35%,  maxErrorRa
te=1.10%,  hashRate=207.3MH/s,  submitted 14 new nonces,  luckFactor=1.10
bus-0-0: ztex_ufm1_15y1-0001-02-07-1: f=212.00MHz,  errorRate=0.00%,  maxErrorRa
te=0.00%,  hashRate=212.0MH/s,  submitted 11 new nonces,  luckFactor=0.68
bus-0-0: ztex_ufm1_15y1-0001-02-07-2: f=208.00MHz,  errorRate=0.77%,  maxErrorRa
te=1.05%,  hashRate=206.4MH/s,  submitted 16 new nonces,  luckFactor=0.93
bus-0-0: ztex_ufm1_15y1-0001-02-07-3: f=212.00MHz,  errorRate=0.67%,  maxErrorRa
te=1.70%,  hashRate=210.6MH/s,  submitted 14 new nonces,  luckFactor=1.02
bus-0-0: ztex_ufm1_15y1-0001-02-07-4: f=204.00MHz,  errorRate=0.93%,  maxErrorRa
te=1.56%,  hashRate=202.1MH/s,  submitted 11 new nonces,  luckFactor=0.83
bus-0-0: poll loop time: 26ms (USB: 5ms network: 21ms)   getwork time: 94ms  sub
mit time: 115ms
Total hash rate: 1244.7 MH/s
Total submitted hash rate: 1097.5 MH/s
 --------
bus-0-0: ztex_ufm1_15y1-0001-02-07-3: Set frequency to 208.00MHz
bus-0-0: ztex_ufm1_15d4-0001-02-05-1: Set frequency to 212.00MHz
bus-0-0: ztex_ufm1_15d4-0001-02-05-1: Set frequency to 208.00MHz
New block detected by long polling
bus-0-0: ztex_ufm1_15d4-0001-02-05-1: f=208.00MHz,  errorRate=0.14%,  maxErrorRa
te=1.43%,  hashRate=207.7MH/s,  submitted 11 new nonces,  luckFactor=0.76
bus-0-0: ztex_ufm1_15d4-0001-02-06-1: f=208.00MHz,  errorRate=0.01%,  maxErrorRa
te=1.10%,  hashRate=208.0MH/s,  submitted 9 new nonces,  luckFactor=0.88
bus-0-0: ztex_ufm1_15y1-0001-02-07-1: f=212.00MHz,  errorRate=0.07%,  maxErrorRa
te=0.71%,  hashRate=211.9MH/s,  submitted 20 new nonces,  luckFactor=0.99
bus-0-0: ztex_ufm1_15y1-0001-02-07-2: f=208.00MHz,  errorRate=0.08%,  maxErrorRa
te=1.05%,  hashRate=207.8MH/s,  submitted 10 new nonces,  luckFactor=0.82
bus-0-0: ztex_ufm1_15y1-0001-02-07-3: f=208.00MHz,  errorRate=0.00%,  maxErrorRa
te=0.00%,  hashRate=208.0MH/s,  submitted 17 new nonces,  luckFactor=1.10
bus-0-0: ztex_ufm1_15y1-0001-02-07-4: f=204.00MHz,  errorRate=0.38%,  maxErrorRa
te=1.56%,  hashRate=203.2MH/s,  submitted 14 new nonces,  luckFactor=0.90
bus-0-0: poll loop time: 25ms (USB: 5ms network: 20ms)   getwork time: 93ms  sub
mit time: 107ms
Total hash rate: 1246.6 MH/s
Total submitted hash rate: 1125.7 MH/s
 --------
New block detected by long polling
bus-0-0: ztex_ufm1_15y1-0001-02-07-2: Set frequency to 212.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-2: Set frequency to 208.00MHz
bus-0-0: ztex_ufm1_15d4-0001-02-05-1: f=208.00MHz,  errorRate=0.28%,  maxErrorRa
te=1.43%,  hashRate=207.4MH/s,  submitted 21 new nonces,  luckFactor=0.98
bus-0-0: ztex_ufm1_15d4-0001-02-06-1: f=208.00MHz,  errorRate=0.06%,  maxErrorRa
te=1.10%,  hashRate=207.9MH/s,  submitted 19 new nonces,  luckFactor=1.02
bus-0-0: ztex_ufm1_15y1-0001-02-07-1: f=212.00MHz,  errorRate=0.22%,  maxErrorRa
te=0.71%,  hashRate=211.5MH/s,  submitted 9 new nonces,  luckFactor=0.87
bus-0-0: ztex_ufm1_15y1-0001-02-07-2: f=208.00MHz,  errorRate=0.76%,  maxErrorRa
te=1.71%,  hashRate=206.4MH/s,  submitted 5 new nonces,  luckFactor=0.68
bus-0-0: ztex_ufm1_15y1-0001-02-07-3: f=208.00MHz,  errorRate=0.00%,  maxErrorRa
te=0.00%,  hashRate=208.0MH/s,  submitted 17 new nonces,  luckFactor=1.12
bus-0-0: ztex_ufm1_15y1-0001-02-07-4: f=204.00MHz,  errorRate=1.58%,  maxErrorRa
te=1.93%,  hashRate=200.8MH/s,  submitted 19 new nonces,  luckFactor=1.05
bus-0-0: poll loop time: 25ms (USB: 4ms network: 20ms)   getwork time: 94ms  sub
mit time: 104ms
Total hash rate: 1242.0 MH/s
Total submitted hash rate: 1176.5 MH/s
 --------
bus-0-0: ztex_ufm1_15y1-0001-02-07-1: Set frequency to 216.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-1: Set frequency to 212.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-3: Set frequency to 216.00MHz
bus-0-0: ztex_ufm1_15y1-0001-02-07-3: Set frequency to 212.00MHz
bus-0-0: ztex_ufm1_15d4-0001-02-05-1: f=208.00MHz,  errorRate=0.16%,  maxErrorRa
te=1.43%,  hashRate=207.7MH/s,  submitted 16 new nonces,  luckFactor=1.01
bus-0-0: ztex_ufm1_15d4-0001-02-06-1: f=208.00MHz,  errorRate=0.01%,  maxErrorRa
te=1.10%,  hashRate=208.0MH/s,  submitted 12 new nonces,  luckFactor=0.97
bus-0-0: ztex_ufm1_15y1-0001-02-07-1: f=212.00MHz,  errorRate=0.51%,  maxErrorRa
te=1.13%,  hashRate=210.9MH/s,  submitted 15 new nonces,  luckFactor=0.91
bus-0-0: ztex_ufm1_15y1-0001-02-07-2: f=208.00MHz,  errorRate=0.02%,  maxErrorRa
te=1.71%,  hashRate=208.0MH/s,  submitted 19 new nonces,  luckFactor=0.82
bus-0-0: ztex_ufm1_15y1-0001-02-07-3: f=212.00MHz,  errorRate=2.22%,  maxErrorRa
te=2.22%,  hashRate=207.3MH/s,  submitted 17 new nonces,  luckFactor=1.14
bus-0-0: ztex_ufm1_15y1-0001-02-07-4: f=204.00MHz,  errorRate=1.55%,  maxErrorRa
te=1.93%,  hashRate=200.8MH/s,  submitted 12 new nonces,  luckFactor=1.01
bus-0-0: poll loop time: 25ms (USB: 4ms network: 20ms)   getwork time: 91ms  sub
mit time: 104ms
Total hash rate: 1242.6 MH/s
Total submitted hash rate: 1206.5 MH/s

ummas

sr. member

Activity: 274

Merit: 250

My notebook broke down.compiling on my tablet sux :/
I`ll try asap on monday

Turbor

legendary

Activity: 1022

Merit: 1000

BitMinter

Quote from: bulanula on May 05, 2012, 01:16:58 PM

But people are lazy and want to get the money printer running right away ...

Not everyone gets overpaid...

bulanula

hero member

Activity: 518

Merit: 500

Quote from: nelisky on May 05, 2012, 01:08:50 PM

Quote from: ummas on May 05, 2012, 10:37:22 AM

Nelisky
Can i have binarys for ubuntu 11.04?
I`m still unable to compile, and i`m trying once a mounth at least :/

Wouldn't you rather learn how to correctly compile? Let me know how it is failing for you or give me ssh access to the machine and we can fix that for you.

Give a man a fish and you feed him for a day. Teach a man how to fish and you feed him for a lifetime.

But people are lazy and want to get the money printer running right away ...

nelisky

legendary

Activity: 1540

Merit: 1002

Quote from: ummas on May 05, 2012, 10:37:22 AM

Nelisky
Can i have binarys for ubuntu 11.04?
I`m still unable to compile, and i`m trying once a mounth at least :/

Wouldn't you rather learn how to correctly compile? Let me know how it is failing for you or give me ssh access to the machine and we can fix that for you.

ummas

sr. member

Activity: 274

Merit: 250

Nelisky
Can i have binarys for ubuntu 11.04?
I`m still unable to compile, and i`m trying once a mounth at least :/

punin

hero member

Activity: 560

Merit: 500

Quote from: CA Coins on May 04, 2012, 01:49:01 PM

I am using this USB hub:
http://www.amazon.com/gp/product/B00483WRZ6/ref=oh_details_o00_s00_i00

If you can live with the color, it's a $11 10-port hub from dealextreme. No problems so far (4 months). I'm running 3 of them. http://www.dealextreme.com/p/high-speed-usb2-0-1-1-10-port-usb-hub-pink-39715?item=8

Topic: ZTEX USB-FPGA Modules 1.15x and 1.15y: 215 and 860 MH/s FPGA Boards - page 16. (Read 182443 times)