This time are we going to lose a bunch of coins again? ie. 100k coins will become 1000?
If this is done, coin will die.. Simples
Just saying..... 
Topic: . - page 7. (Read 36731 times)
This time are we going to lose a bunch of coins again? ie. 100k coins will become 1000?
If this is done, coin will die.. Simples
I think because the code is too medival that the only resort is to do a PoB Only 
I will premine 47343 Blocks Worth of XNA and then we will have to go through last times pain, but this time I am thinking of Hosting it on BitCoinTalk.
The Coins will be sent to: XBMEr9McFXkiLWTVqTyuNQR1CqKkMPMn6L
The Evidence is to be sent to: [email protected]
PoB Reservation will be 25165812.04342900 rDNA
Differences: PoW Will be Forever @ But Only @ 1 Coin Per Block, PoS Will be of .1 - .5 Random % Interest and Also 0 Fees and 5 Confirmations needed....
=============== THIS IS A SAMPLE ===========================
Inputs are needed! Please Help!
I will premine 47343 Blocks Worth of XNA and then we will have to go through last times pain, but this time I am thinking of Hosting it on BitCoinTalk.
The Coins will be sent to: XBMEr9McFXkiLWTVqTyuNQR1CqKkMPMn6L
The Evidence is to be sent to: [email protected]
PoB Reservation will be 25165812.04342900 rDNA
Differences: PoW Will be Forever @ But Only @ 1 Coin Per Block, PoS Will be of .1 - .5 Random % Interest and Also 0 Fees and 5 Confirmations needed....
=============== THIS IS A SAMPLE ===========================
Inputs are needed! Please Help!
There was a lot of confusion last time. If this is done it would have to be done in a very orderly manner and with decent time frames.
It is a big deal to be doing this again, but if the code is a mess it might be needed.
I think because the code is too medival that the only resort is to do a PoB Only
I will premine 47343 Blocks Worth of XNA and then we will have to go through last times pain, but this time I am thinking of Hosting it on BitCoinTalk.
The Coins will be sent to: XBMEr9McFXkiLWTVqTyuNQR1CqKkMPMn6L
The Evidence is to be sent to: [email protected]
PoB Reservation will be 25165812.04342900 rDNA
Differences: PoW Will be Forever @ But Only @ 1 Coin Per Block, PoS Will be of .1 - .5 Random % Interest and Also 0 Fees and 5 Confirmations needed....
=============== THIS IS A SAMPLE ===========================
Inputs are needed! Please Help!
I will premine 47343 Blocks Worth of XNA and then we will have to go through last times pain, but this time I am thinking of Hosting it on BitCoinTalk.
The Coins will be sent to: XBMEr9McFXkiLWTVqTyuNQR1CqKkMPMn6L
The Evidence is to be sent to: [email protected]
PoB Reservation will be 25165812.04342900 rDNA
Differences: PoW Will be Forever @ But Only @ 1 Coin Per Block, PoS Will be of .1 - .5 Random % Interest and Also 0 Fees and 5 Confirmations needed....
=============== THIS IS A SAMPLE ===========================
Inputs are needed! Please Help!
no...
imagine Gavin trying to do the same with Bitcoin
swap coins
niitassin,
what version of Qt did you use to get this to compile? Using the source I am getting many depricated calls from QT for 5.2.1 and 5.4.2. Please update the source or let me know what to change to get this to compile. I have been slowly using https://bitcointalk.org/index.php?topic=149479.820 and https://github.com/bitcoin/bitcoin/commit/25c0cce7fb494fcb871d134e28b26504d30e34d3 to scrape through the code and make changes, but if you got it to compile, you probably already have the changes. If so, please update github with changes.
If not, I will continue to work on compiling. I would send you a donut, but it would be cost prohibitive to send from the east coast of the US to India and would probably be stale by the time it got to you
-ctgiant
what version of Qt did you use to get this to compile? Using the source I am getting many depricated calls from QT for 5.2.1 and 5.4.2. Please update the source or let me know what to change to get this to compile. I have been slowly using https://bitcointalk.org/index.php?topic=149479.820 and https://github.com/bitcoin/bitcoin/commit/25c0cce7fb494fcb871d134e28b26504d30e34d3 to scrape through the code and make changes, but if you got it to compile, you probably already have the changes. If so, please update github with changes.
If not, I will continue to work on compiling. I would send you a donut, but it would be cost prohibitive to send from the east coast of the US to India and would probably be stale by the time it got to you
-ctgiant
If you just want to fix the compile errors without rewriting the code (which should really be done), you can add this back in to the top of the Qt makefile:
Code:
greaterThan(QT_MAJOR_VERSION, 4) {
QT += widgets
DEFINES += QT_DISABLE_DEPRECATED_BEFORE=0
}
QT += widgets
DEFINES += QT_DISABLE_DEPRECATED_BEFORE=0
}
Niitassin removed it after I mentioned that the Qt Makefile should probably prevent users from trying to compile with Qt versions less than 5... but he didn't update any of the calls.
niitassin,
what version of Qt did you use to get this to compile? Using the source I am getting many depricated calls from QT for 5.2.1 and 5.4.2. Please update the source or let me know what to change to get this to compile. I have been slowly using https://bitcointalk.org/index.php?topic=149479.820 and https://github.com/bitcoin/bitcoin/commit/25c0cce7fb494fcb871d134e28b26504d30e34d3 to scrape through the code and make changes, but if you got it to compile, you probably already have the changes. If so, please update github with changes.
If not, I will continue to work on compiling. I would send you a donut, but it would be cost prohibitive to send from the east coast of the US to India and would probably be stale by the time it got to you
-ctgiant
what version of Qt did you use to get this to compile? Using the source I am getting many depricated calls from QT for 5.2.1 and 5.4.2. Please update the source or let me know what to change to get this to compile. I have been slowly using https://bitcointalk.org/index.php?topic=149479.820 and https://github.com/bitcoin/bitcoin/commit/25c0cce7fb494fcb871d134e28b26504d30e34d3 to scrape through the code and make changes, but if you got it to compile, you probably already have the changes. If so, please update github with changes.
If not, I will continue to work on compiling. I would send you a donut, but it would be cost prohibitive to send from the east coast of the US to India and would probably be stale by the time it got to you
-ctgiant
Guys, niitassin already said that the new wallet "works, but doesn't sync" here:
I suggest running the 2.3.0.0 or 2.3.1.0 wallet (you'll have to build 2.3.1.0 from the source because niitassin never released binaries for that) until he fixes it, since there is absolutely no point in using the 4.0.0.0 release. Running a wallet that doesn't sync is an awful idea, but releasing a wallet that doesn't sync without mentioning it didn't sync in the post... and changing the links on the first post... was a worse idea.
Edit: here is my summary of issues for the 4.0.0.0 wallet, some of which have been fixed.
Edit 2: removing redundant words (too many "releases" in the "awful idea" sentence)
I tried these:
- I connected to nodes and got 3 Connections but no Sync
- I imported my old blkindex.dat
- I ate a bagel and waited for an hour looking at the I/O Traffic
RESULT: NO SYNC PROBLEM Otherwise Everything is Good
- I connected to nodes and got 3 Connections but no Sync
- I imported my old blkindex.dat
- I ate a bagel and waited for an hour looking at the I/O Traffic
RESULT: NO SYNC PROBLEM Otherwise Everything is Good
I suggest running the 2.3.0.0 or 2.3.1.0 wallet (you'll have to build 2.3.1.0 from the source because niitassin never released binaries for that) until he fixes it, since there is absolutely no point in using the 4.0.0.0 release. Running a wallet that doesn't sync is an awful idea, but releasing a wallet that doesn't sync without mentioning it didn't sync in the post... and changing the links on the first post... was a worse idea.
admin do a normal wallet with a normal sync.
when will it be??? нy eй бoгy зaeбaлo yжe этy xyйню кaчaть и oбнoвлять. c нyля кaшeлeк вooбщe нe oбнoвляeтcя. a вы тyт пpo мacтepнoды чeшeтe.
The 2.3.1.0 wallet (of course, the one with unreleased binaries) fixed the blockchain syncing problem. It's very good news if you're using Linux. (And if you're using Windows and comfortable with VMs, that might be the way to go.)when will it be??? нy eй бoгy зaeбaлo yжe этy xyйню кaчaть и oбнoвлять. c нyля кaшeлeк вooбщe нe oбнoвляeтcя. a вы тyт пpo мacтepнoды чeшeтe.
Edit: here is my summary of issues for the 4.0.0.0 wallet, some of which have been fixed.
Edit 2: removing redundant words (too many "releases" in the "awful idea" sentence)
although there is an Issue with Syncing! 
99min
99min Any nodes sire?
Have you tried these nodes from the OP?
addnode=182.56.83.165
addnode=5.83.18.254
addnode=24.21.89.229
addnode=24.191.33.43
addnode=52.28.61.59
addnode=62.30.194.230
addnode=77.131.13.211
addnode=86.143.78.51
addnode=95.236.72.169
addnode=182.56.83.165
addnode=197.3.207.58
addnode=198.245.50.213
addnode=208.90.164.68
addnode=212.17.40.234
addnode=216.211.43.15
still no sync
although there is an Issue with Syncing! 99min
99min Any nodes sire?
Have you tried these nodes from the OP?
addnode=182.56.83.165
addnode=5.83.18.254
addnode=24.21.89.229
addnode=24.191.33.43
addnode=52.28.61.59
addnode=62.30.194.230
addnode=77.131.13.211
addnode=86.143.78.51
addnode=95.236.72.169
addnode=182.56.83.165
addnode=197.3.207.58
addnode=198.245.50.213
addnode=208.90.164.68
addnode=212.17.40.234
addnode=216.211.43.15
although there is an Issue with Syncing! 99min
99min Any nodes sire?
after running for an hourish, 2nd attempt no syncing
20:51:02
getpeerinfo
20:51:02

[
{
"addr" : "198.245.50.213:10592",
"services" : "00000000",
"lastsend" : 1433706622,
"lastrecv" : 0,
"bytessent" : 128,
"bytesrecv" : 0,
"conntime" : 1433706622,
"pingtime" : 0.00000000,
"version" : 0,
"subver" : "",
"inbound" : false,
"startingheight" : -1,
"banscore" : 0,
"syncnode" : false
}
]
tried several restarts. tried copying contents of DeOxyRibose folder into new rdna folder and it starts at 0 blocks again.
should the conf file still be named DeOxyRibose.conf?
addnode=182.56.83.165
is all that's in mine any more nodes/settings i should add?
So has anyone had coins sent to Empo-Ex yet? My wallet keeps freezing and I'm trying to repair it but it keeps fucking up
What does EmpoEX have to do with your wallet?
Good work Dev When there's a sell, there's a buy, where's the buy?
we do when you see a normal version of the purse with a normal sync???
admin??
1. Source (http://github.com/niitassin/XNAPoS)
2. BlockChain (http://deoxyribose.cf/pre-release/wallet.zip)
3. Nodes (addnode=182.56.79.76)
4. Windows Binary (http://deoxyribose.cf/pre-release/windows-2.0.0.zip)
admin??
1. Source (http://github.com/niitassin/XNAPoS)
2. BlockChain (http://deoxyribose.cf/pre-release/wallet.zip)
3. Nodes (addnode=182.56.79.76)
4. Windows Binary (http://deoxyribose.cf/pre-release/windows-2.0.0.zip)
Update your SECP256k1, Your's is outdated, you can compile from .\contrib\secp256k1
it doesn't work to compile from there:
Code:
~/DeOxyRibose/contrib/secp256k1$ sh autogen.sh
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'.
libtoolize: copying file `build-aux/ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `build-aux/m4'.
libtoolize: copying file `build-aux/m4/libtool.m4'
libtoolize: copying file `build-aux/m4/ltoptions.m4'
libtoolize: copying file `build-aux/m4/ltsugar.m4'
libtoolize: copying file `build-aux/m4/ltversion.m4'
libtoolize: copying file `build-aux/m4/lt~obsolete.m4'
configure.ac:317: error: required file 'libsecp256k1.pc.in' not found
autoreconf: automake failed with exit status: 1
$ ./configure
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking how to print strings... printf
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether make supports nested variables... (cached) yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for ar... /usr/bin/ar
checking for ranlib... /usr/bin/ranlib
checking for strip... /usr/bin/strip
checking for gcc option to accept ISO C89... (cached) none needed
checking if gcc supports -std=c89 -pedantic -Wall -Wextra -Wcast-align -Wnested-externs -Wshadow -Wstrict-prototypes -Wno-unused-function -Wno-long-long -Wno-overlength-strings... yes
checking for __int128... yes
checking for __builtin_expect... yes
./configure: line 12234: SECP_64BIT_ASM_CHECK: command not found
./configure: line 12263: SECP_INT128_CHECK: command not found
./configure: line 12291: SECP_INT128_CHECK: command not found
./configure: line 12316: SECP_GMP_CHECK: command not found
./configure: line 12422: SECP_OPENSSL_CHECK: command not found
checking whether byte ordering is bigendian... no
configure: Using assembly optimizations: no
configure: Using field implementation: 32bit
configure: Using bignum implementation: no
configure: Using scalar implementation: 32bit
configure: Using endomorphism optimizations: no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: error: cannot find input file: `Makefile.in'
So has anyone had coins sent to Empo-Ex yet? My wallet keeps freezing and I'm trying to repair it but it keeps fucking up
What does EmpoEX have to do with your wallet?
Jump to: