[0/500 LEFT] ★ .999 FINE COPPER - 0.1 BITCOIN - CRYPTOLATOR PHYSICAL BITCOIN ★ - page 3.

Cryptolator

hero member

Activity: 508

Merit: 500

Quote from: Gladdy on February 21, 2015, 05:37:54 PM

I would gladly put down the pre-order BTC in the escrow if Cryptolator can get the Ant 1oz and the B 1oz design . Those are cool designs. I am pretty sure the bitcointalk community would support your projects and do a pre-order thru an escrow. The problem with the Coinographic is they put an extraodinary super high premium on their coins that they don't get much orders.

While those designs are cute and all, they does not mean anything, they are thoughtless and are not appealing to me in term of message or image. I've putted a lot of efforts and references in my first coin and I do think that it was the best design out of any crypto coins(I know it sounds pretentious, but it is more self satisfaction than anything Tongue

). (BTW, What the hell does an ant have to do with Bitcoin(lafontaine fables, maybe...) , and the geared "B" is just lame in my opinion, and I guess, that's only my opinion and I do understand that some peoples like it)

Coinographic was doomed to fail from the beginning, don't know who was running that but it looked like they had some mathematical deficiency. (My two cents).

I am pretty sure that you would all like the next design.

Gladdy

sr. member

Activity: 318

Merit: 250

Quote from: Luckycoin90 on February 21, 2015, 12:22:36 PM

Quote from: Cryptolator on February 21, 2015, 09:08:09 AM

Quote from: miffman on February 21, 2015, 03:12:00 AM

Quote from: Cryptolator on February 20, 2015, 07:48:37 PM

GONE.
NO MORE COINS LEFT.

when will we be seeing the new design? Grin

I'm currently trying to figure out a way to make it.

I've lost my job a few months ago and it's kinda hard for me to get all the money needed to do the next design.

The other problem is the Canadian Dollars value vs USD, it's so low that it make the project to cost even higher.

I really want to make the next series (Which would be 100 x 1 ounce silver coins), this would cost me a total of around 7000$ (Design, Plaster Sculpt, Dies, Box, Holo, Certificate, Air-tite and coins), so I would have to sell them around 89$ each to make a little profit and covering the working hours of me and my dad (Yeah, I make them with my dad, Tongue

)

That's about it... I hope to find a way to be able to make it :/

there were some really nice bitcoin designers such as the Ant 1 oz and the 2 oz bitcoin from mrBau. they designed for Coinographic but they went bankrupt so these designers did not get paid. you can get complete this project with Cryptolator name on it. it is faster and cheaper . Cost much less than $7000 for sure.

I would gladly put down the pre-order BTC in the escrow if Cryptolator can get the Ant 1oz and the B 1oz design . Those are cool designs. I am pretty sure the bitcointalk community would support your projects and do a pre-order thru an escrow. The problem with the Coinographic is they put an extraodinary super high premium on their coins that they don't get much orders.

Cryptolator

hero member

Activity: 508

Merit: 500

Quote from: Luckycoin90 on February 21, 2015, 12:22:36 PM

Quote from: Cryptolator on February 21, 2015, 09:08:09 AM

Quote from: miffman on February 21, 2015, 03:12:00 AM

Quote from: Cryptolator on February 20, 2015, 07:48:37 PM

GONE.
NO MORE COINS LEFT.

when will we be seeing the new design? Grin

I'm currently trying to figure out a way to make it.

I've lost my job a few months ago and it's kinda hard for me to get all the money needed to do the next design.

The other problem is the Canadian Dollars value vs USD, it's so low that it make the project to cost even higher.

I really want to make the next series (Which would be 100 x 1 ounce silver coins), this would cost me a total of around 7000$ (Design, Plaster Sculpt, Dies, Box, Holo, Certificate, Air-tite and coins), so I would have to sell them around 89$ each to make a little profit and covering the working hours of me and my dad (Yeah, I make them with my dad, Tongue

)

That's about it... I hope to find a way to be able to make it :/

there were some really nice bitcoin designers such as the Ant 1 oz and the 2 oz bitcoin from mrBau. they designed for Coinographic but they went bankrupt so these designers did not get paid. you can get complete this project with Cryptolator name on it. it is faster and cheaper . Cost much less than $7000 for sure.

I already have the design in head and that is not what would cost the most (Around 800$ from the artist who made the first design based on my rough design), the Sculpt and Die are where the money goes (Except when you only put a B on a coin Tongue

), my coins are really high quality and have a lot of details, I would never go to anything that does not meet or exceed the first edition quality.

My design would be awesome and kinda related two the first design (Completely different design tho)

Yeah, maybe I could escrow pre-orders, but I would need at least 50% of the coins pre-sold in order to make it.

If you have ideas on how I could manage that I will be happy to get your suggestion !

bithalo

legendary

Activity: 1470

Merit: 1017

Star Wars Ep. 9 is here

Quote from: Luckycoin90 on February 21, 2015, 12:22:36 PM

Quote from: Cryptolator on February 21, 2015, 09:08:09 AM

Quote from: miffman on February 21, 2015, 03:12:00 AM

Quote from: Cryptolator on February 20, 2015, 07:48:37 PM

GONE.
NO MORE COINS LEFT.

when will we be seeing the new design? Grin

I'm currently trying to figure out a way to make it.

I've lost my job a few months ago and it's kinda hard for me to get all the money needed to do the next design.

The other problem is the Canadian Dollars value vs USD, it's so low that it make the project to cost even higher.

I really want to make the next series (Which would be 100 x 1 ounce silver coins), this would cost me a total of around 7000$ (Design, Plaster Sculpt, Dies, Box, Holo, Certificate, Air-tite and coins), so I would have to sell them around 89$ each to make a little profit and covering the working hours of me and my dad (Yeah, I make them with my dad, Tongue

)

That's about it... I hope to find a way to be able to make it :/

there were some really nice bitcoin designers such as the Ant 1 oz and the 2 oz bitcoin from mrBau. they designed for Coinographic but they went bankrupt so these designers did not get paid. you can get complete this project with Cryptolator name on it. it is faster and cheaper . Cost much less than $7000 for sure.

I would love to see the Coinographic 1B "Ant" and 2B "B" designs that never got made be done by a legit maker. It may save time and design costs for the coin maker, get the designers Mr Bau and Martin Lauritsen some compensation and satisfaction for their work, and the community finally gets to see these great designs made.

miffman

legendary

Activity: 1904

Merit: 1005

PGP ID: 78B7B84D

Quote from: Luckycoin90 on February 21, 2015, 12:22:36 PM

Quote from: Cryptolator on February 21, 2015, 09:08:09 AM

Quote from: miffman on February 21, 2015, 03:12:00 AM

Quote from: Cryptolator on February 20, 2015, 07:48:37 PM

GONE.
NO MORE COINS LEFT.

when will we be seeing the new design? Grin

I'm currently trying to figure out a way to make it.

I've lost my job a few months ago and it's kinda hard for me to get all the money needed to do the next design.

The other problem is the Canadian Dollars value vs USD, it's so low that it make the project to cost even higher.

I really want to make the next series (Which would be 100 x 1 ounce silver coins), this would cost me a total of around 7000$ (Design, Plaster Sculpt, Dies, Box, Holo, Certificate, Air-tite and coins), so I would have to sell them around 89$ each to make a little profit and covering the working hours of me and my dad (Yeah, I make them with my dad, Tongue

)

That's about it... I hope to find a way to be able to make it :/

there were some really nice bitcoin designers such as the Ant 1 oz and the 2 oz bitcoin from mrBau. they designed for Coinographic but they went bankrupt so these designers did not get paid. you can get complete this project with Cryptolator name on it. it is faster and cheaper . Cost much less than $7000 for sure.

definitely the 1oz silver or gold ant. that looks legit.

Luckycoin90

member

Activity: 91

Merit: 10

Quote from: Cryptolator on February 21, 2015, 09:08:09 AM

Quote from: miffman on February 21, 2015, 03:12:00 AM

Quote from: Cryptolator on February 20, 2015, 07:48:37 PM

GONE.
NO MORE COINS LEFT.

when will we be seeing the new design? Grin

I'm currently trying to figure out a way to make it.

I've lost my job a few months ago and it's kinda hard for me to get all the money needed to do the next design.

The other problem is the Canadian Dollars value vs USD, it's so low that it make the project to cost even higher.

I really want to make the next series (Which would be 100 x 1 ounce silver coins), this would cost me a total of around 7000$ (Design, Plaster Sculpt, Dies, Box, Holo, Certificate, Air-tite and coins), so I would have to sell them around 89$ each to make a little profit and covering the working hours of me and my dad (Yeah, I make them with my dad, Tongue

)

That's about it... I hope to find a way to be able to make it :/

there were some really nice bitcoin designers such as the Ant 1 oz and the 2 oz bitcoin from mrBau. they designed for Coinographic but they went bankrupt so these designers did not get paid. you can get complete this project with Cryptolator name on it. it is faster and cheaper . Cost much less than $7000 for sure.

bithalo

legendary

Activity: 1470

Merit: 1017

Star Wars Ep. 9 is here

Quote from: Cryptolator on February 21, 2015, 09:08:09 AM

Quote from: miffman on February 21, 2015, 03:12:00 AM

Quote from: Cryptolator on February 20, 2015, 07:48:37 PM

GONE.
NO MORE COINS LEFT.

when will we be seeing the new design? Grin

I'm currently trying to figure out a way to make it.

I've lost my job a few months ago and it's kinda hard for me to get all the money needed to do the next design.

The other problem is the Canadian Dollars value vs USD, it's so low that it make the project to cost even higher.

I really want to make the next series (Which would be 100 x 1 ounce silver coins), this would cost me a total of around 7000$ (Design, Plaster Sculpt, Dies, Box, Holo, Certificate, Air-tite and coins), so I would have to sell them around 89$ each to make a little profit and covering the working hours of me and my dad (Yeah, I make them with my dad, Tongue

)

That's about it... I hope to find a way to be able to make it :/

Hope things work out for you. I really liked your first version.

Looking forward to the next design. You could always gauge interest, take a small up front amount for preorder and/or have people put money up front in escrow so you know you have orders.

DaveF

legendary

Activity: 3500

Merit: 6320

Crypto Swap Exchange

You should change the title of the thread to 0 /500 left.
This way people know they are gone. And you can judge interest in the next ones.

Also, (and this is just my view), there are a lot of the 1oz rounds. Go for something different.
-Dave

Cryptolator

hero member

Activity: 508

Merit: 500

Quote from: miffman on February 21, 2015, 03:12:00 AM

Quote from: Cryptolator on February 20, 2015, 07:48:37 PM

GONE.
NO MORE COINS LEFT.

when will we be seeing the new design? Grin

I'm currently trying to figure out a way to make it.

I've lost my job a few months ago and it's kinda hard for me to get all the money needed to do the next design.

The other problem is the Canadian Dollars value vs USD, it's so low that it make the project to cost even higher.

I really want to make the next series (Which would be 100 x 1 ounce silver coins), this would cost me a total of around 7000$ (Design, Plaster Sculpt, Dies, Box, Holo, Certificate, Air-tite and coins), so I would have to sell them around 89$ each to make a little profit and covering the working hours of me and my dad (Yeah, I make them with my dad, Tongue

)

That's about it... I hope to find a way to be able to make it :/

miffman

legendary

Activity: 1904

Merit: 1005

PGP ID: 78B7B84D

Quote from: Cryptolator on February 20, 2015, 07:48:37 PM

GONE.
NO MORE COINS LEFT.

when will we be seeing the new design? Grin

Cryptolator

hero member

Activity: 508

Merit: 500

GONE.
NO MORE COINS LEFT.

Cryptolator

hero member

Activity: 508

Merit: 500

UPDATED

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: Cryptolator on February 16, 2015, 07:25:30 PM

10 x Cryptolator Unchained Copper ebay auction:

http://www.ebay.com/itm/251843400886

Starting bid at 89.00$ for 10 Coins, making them 8.90$ each.

25 x Cryptolator Unchained Copper ebay auction:

http://www.ebay.com/itm/251843401380

Starting bid at 189.00$ for 25 Coins, making them 7.60$ each.

So if you want some really high quality coins (And I mean, the highest quality of all Physical Cryptocurrency Coins) for a very low price, this is your chance !

For full disclosure I have a sig for Cryptolator right now.

But I will vouch these are beautiful coins. You will not find ANYTHING near this quality at the less then 8 dollar price.

Cryptolator

hero member

Activity: 508

Merit: 500

UPDATED

notlist3d

legendary

Activity: 1456

Merit: 1000

Took a few pictures with a new camera. Still hard to do justice to coin in a picture. Since resolution just linking to them.

Entire package - http://i100.photobucket.com/albums/m25/notlist3d/2-9-15/DSC_1265_zpsc2a2f88e.jpg
Close up of coin - http://i100.photobucket.com/albums/m25/notlist3d/2-9-15/DSC_1259_zps8ad7f232.jpg

Gladdy

sr. member

Activity: 318

Merit: 250

Quote from: Cryptolator on February 04, 2015, 04:23:35 PM

10 x Cryptolator Unchained Copper ebay auction:

http://www.ebay.com/itm/251818262732

Starting bid at 89.00$ for 10 Coins, making them 8.90$ each.

25 x Cryptolator Unchained Copper ebay auction:

http://www.ebay.com/itm/251818259955

Starting bid at 189.00$ for 25 Coins, making them 7.60$ each.

So if you want some really high quality coins (And I mean, the highest quality of all Physical Cryptocurrency Coins) for a very low price, this is your chance !

If I can sell all the coins that I have left, I'll be able to proceed in creating the next series, which will be awesome if I can make it happen ! Tongue

So, the future of Cryptolator is in your hands, if you like my work, go ahead and buy them ! Smiley

22h left for both !

Does anyone have the Silver unchained Element series coins available for sale ? Plz PM me.

Cryptolator

hero member

Activity: 508

Merit: 500

Quote from: icey on February 04, 2015, 05:18:15 PM

According to the auction, you won't ship to the UK? this correct?

I'd place a bid otherwise

Unfortunately, on eBay, I chosed to ship only in North America.

You can PM and I can make you a price (@starting bid price) + shipping to UK.

icey

legendary

Activity: 1578

Merit: 1000

May the coin be with you..

According to the auction, you won't ship to the UK? this correct?

I'd place a bid otherwise

Cryptolator

hero member

Activity: 508

Merit: 500

ENDED

Cryptolator

hero member

Activity: 508

Merit: 500

Updated

Topic: [0/500 LEFT] ★ .999 FINE COPPER - 0.1 BITCOIN - CRYPTOLATOR PHYSICAL BITCOIN ★ - page 3. (Read 17825 times)