[1500 TH] p2pool: Decentralized, DoS-resistant, Hop-Proof pool - page 676.

alpet

legendary

Activity: 1912

Merit: 1020

Quote from: Smoovious on June 19, 2012, 08:20:38 AM

is the highlighting, user-defined?

cuz, if I tried to use that, with the colors your screenshot currently shows, I'd have to rip my eyes out.

-- Smoov

Now colors are fixed. In the next version they will change from a script Lua.

[edited]
I upload it here.

eightbitbandit

newbie

Activity: 8

Merit: 0

Did the latest update up the ram requirement significantly? I've had oom-killer kill the python process twice in 24hrs. I restarted it again this morning and it's already back up to 350mb. This box only has 1gb total, but it's had no problem running p2pool for weeks uninterrupted before. I finally just put an entry in crontab to restart the thing every 6 hrs.

rav3n_pl

legendary

Activity: 1361

Merit: 1003

Don`t panic! Organize!

Quote from: Peterae on June 19, 2012, 08:26:55 AM

Every time there was Bitcoins found i was getting a payout, no matter how long it took the pool to find the bitcoins.
I extracted the p2pool executable on to a directory on my desktop, when i upgraded i deleted old folder and replaced with new extracted folder and ran it as before.
It's the 32bit version of p2pool.

To preserve old graphs, payout adress and sharechain you have 2 ways to update:
- overwrite new files in same directory
- copy data folder from old direcotry to new (you might wat to skip log file)

If you unzip new package and run it P2pool can sometimes choose different payout adress and you need "earn" new shares to payout. You also lose all previous stats and pool need download and verify current sharechain.

Peterae

newbie

Activity: 22

Merit: 0

Quote

You kan make a Test and Point Your Miner to my node: http://p2pool-cologne.dyndns.org:9332 0% fee
Set YOUR BTC Adress as Username

Thanks i will try that when i get home.

Peterae

newbie

Activity: 22

Merit: 0

Quote

Did you copy data directory from older version?
If not, P2pool might get new adress for payouts and you lost all previous stats.
Sometimes I not get share all 24hours.... and sometimes 4 in a hour.

Every time there was Bitcoins found i was getting a payout, no matter how long it took the pool to find the bitcoins.
I extracted the p2pool executable on to a directory on my desktop, when i upgraded i deleted old folder and replaced with new extracted folder and ran it as before.
It's the 32bit version of p2pool.

My new HD7850 has just arrived, looks like i need a new psu to run it Undecided

Smoovious

hero member

Activity: 504

Merit: 500

Scattering my bits around the net since 1980

Quote from: alpet on June 19, 2012, 01:20:48 AM

Hi All!
I wrote a utility for remote monitoring of p2pool working. Download it here.

is the highlighting, user-defined?

cuz, if I tried to use that, with the colors your screenshot currently shows, I'd have to rip my eyes out.

-- Smoov

Subo1977

sr. member

Activity: 344

Merit: 250

Flixxo - Watch, Share, Earn!

Quote from: rav3n_pl on June 19, 2012, 08:03:08 AM

Quote from: Peterae on June 19, 2012, 07:38:35 AM

Quote

your problem is based on a to low hashrate i think.
p2pool s on a much higher difficulty. It takes about 40-50 min. to get a share with my ~830 MH/s. So, with your hashrate it will take about 10 hours or something.
without a share, you get no payout. And when you get a share early in one round, it could be that you also get no (or very low) payout, because it's pplns.

with low hash rates you should try a pps based node to p2pool, instead of running your own one, imho.

I was getting shares and payouts up until i upgraded to the newer version 2 days ago, i have currently been running since this morning and am not showing on the stats page at all, and have not received a share of the last payout, i was getting shares of payout on very short 1 hour or so crunches before.

Did you copy data directory from older version?
If not, P2pool might get new adress for payouts and you lost all previous stats.
Sometimes I not get share all 24hours.... and sometimes 4 in a hour.

You kan make a Test and Point Your Miner to my node: http://p2pool-cologne.dyndns.org:9332 0% fee
Set YOUR BTC Adress as Username

rav3n_pl

legendary

Activity: 1361

Merit: 1003

Don`t panic! Organize!

Quote from: Peterae on June 19, 2012, 07:38:35 AM

Quote

your problem is based on a to low hashrate i think.
p2pool s on a much higher difficulty. It takes about 40-50 min. to get a share with my ~830 MH/s. So, with your hashrate it will take about 10 hours or something.
without a share, you get no payout. And when you get a share early in one round, it could be that you also get no (or very low) payout, because it's pplns.

with low hash rates you should try a pps based node to p2pool, instead of running your own one, imho.

I was getting shares and payouts up until i upgraded to the newer version 2 days ago, i have currently been running since this morning and am not showing on the stats page at all, and have not received a share of the last payout, i was getting shares of payout on very short 1 hour or so crunches before.

Did you copy data directory from older version?
If not, P2pool might get new adress for payouts and you lost all previous stats.
Sometimes I not get share all 24hours.... and sometimes 4 in a hour.

sharky112065

sr. member

Activity: 383

Merit: 250

Quote from: Ed on June 19, 2012, 03:54:49 AM

Quote from: sharky112065 on June 19, 2012, 03:18:34 AM

disk I/O related

the same time run second p2pool node for LTC mining without any frozen

Which is why I said it is bitcoind causing the issue. LTC does not use bitcoind (I do not mine LTC, so have no knowledge of what ?...d it is using).

Peterae

newbie

Activity: 22

Merit: 0

Quote

your problem is based on a to low hashrate i think.
p2pool s on a much higher difficulty. It takes about 40-50 min. to get a share with my ~830 MH/s. So, with your hashrate it will take about 10 hours or something.
without a share, you get no payout. And when you get a share early in one round, it could be that you also get no (or very low) payout, because it's pplns.

with low hash rates you should try a pps based node to p2pool, instead of running your own one, imho.

I was getting shares and payouts up until i upgraded to the newer version 2 days ago, i have currently been running since this morning and am not showing on the stats page at all, and have not received a share of the last payout, i was getting shares of payout on very short 1 hour or so crunches before.

rav3n_pl

legendary

Activity: 1361

Merit: 1003

Don`t panic! Organize!

Quote from: doobeedoo on June 19, 2012, 04:25:55 AM

Quote from: Peterae on June 19, 2012, 03:55:12 AM

OK i think i understand whats happened here, the payout is not going to my wallet address, that would explain why it tailed off after the version update gradually to low hash rate and then dissapeared from the stats page.

So does P2Pool take the wallet address from guiminer username field.

your problem is based on a to low hashrate i think.
p2pool s on a much higher difficulty. It takes about 40-50 min. to get a share with my ~830 MH/s. So, with your hashrate it will take about 10 hours or something.
without a share, you get no payout. And when you get a share early in one round, it could be that you also get no (or very low) payout, because it's pplns.

with low hashrates you should try a pps based node to p2pool, instead of running your own one, imho.

On 170MH/s it tiakes 3-4 hrs to make a share on p2pool.
Hashrate reporten on p2pool is calcuated basing on diff1 shares send to it. So it can be different form miner stats.
If you run own p2pool no need to add wallet adress on miner config.

BTW: 75% nodes updated to v3 Cheesy

6% still on v2 18% on v1

rav3n_pl

legendary

Activity: 1361

Merit: 1003

Don`t panic! Organize!

Quote from: Ed on June 19, 2012, 02:59:01 AM

Quote from: forrestv on June 18, 2012, 12:40:37 AM

P2Pool release 3.1
....

Code:

> ---> LOST CONTACT WITH BITCOIND for 2.3 minutes! Check that it isn't frozen or dead! <---

still happening, 3-4 times per 24h

This is bitcoind issue, not p2pool error.
It should be fixed on bitcoin 0.7 release.

doobeedoo

newbie

Activity: 24

Merit: 0

Quote from: Peterae on June 19, 2012, 03:55:12 AM

OK i think i understand whats happened here, the payout is not going to my wallet address, that would explain why it tailed off after the version update gradually to low hash rate and then dissapeared from the stats page.

So does P2Pool take the wallet address from guiminer username field.

your problem is based on a to low hashrate i think.
p2pool s on a much higher difficulty. It takes about 40-50 min. to get a share with my ~830 MH/s. So, with your hashrate it will take about 10 hours or something.
without a share, you get no payout. And when you get a share early in one round, it could be that you also get no (or very low) payout, because it's pplns.

with low hashrates you should try a pps based node to p2pool, instead of running your own one, imho.

Krak

hero member

Activity: 591

Merit: 500

Quote from: Peterae on June 19, 2012, 03:55:12 AM

So does P2Pool take the wallet address from guiminer username field.

The address that you use as your miner username takes the highest priority, yeah. You can also specify a payout address with the -a flag when running p2pool. That address would be used if you specify a different miner username (such as "user") or if you have a fee set up on your node.

Peterae

newbie

Activity: 22

Merit: 0

OK i think i understand whats happened here, the payout is not going to my wallet address, that would explain why it tailed off after the version update gradually to low hash rate and then dissapeared from the stats page.

So does P2Pool take the wallet address from guiminer username field.

Ed

member

Activity: 69

Merit: 10

Quote from: sharky112065 on June 19, 2012, 03:18:34 AM

disk I/O related

the same time run second p2pool node for LTC mining without any frozen

Peterae

newbie

Activity: 22

Merit: 0

OK been running for a good 20 minuets now here's a screen shot of p2pool running, i am not on the stats page at all

http://www.peteraevans.co.uk/screen2.jpg

sharky112065

sr. member

Activity: 383

Merit: 250

Quote from: Ed on June 19, 2012, 02:59:01 AM

Quote from: forrestv on June 18, 2012, 12:40:37 AM

P2Pool release 3.1
....

Code:

> ---> LOST CONTACT WITH BITCOIND for 2.3 minutes! Check that it isn't frozen or dead! <---

still happening, 3-4 times per 24h

I had that happen yesterday and it was disk I/O related. I was using tar to temporarily archive a bunch of ISO image files and I had that issue.

So for me it was an issue with bitcoind and disk I/O. When I was done archiving the data, the messages went away.

Peterae

newbie

Activity: 22

Merit: 0

I have stopped running it now as i was getting no stats or rewards.
When i checked the stats page when i took that screen shot it listed me as 7MHash which was different to the 43 it was saying, it gradually went to zero hash and dissapeared off the stats page altogether.

I will try rerunning it and take shots of all screens again after 10 minuets

Ed

member

Activity: 69

Merit: 10

Quote from: forrestv on June 18, 2012, 12:40:37 AM

P2Pool release 3.1
....

Code:

> ---> LOST CONTACT WITH BITCOIND for 2.3 minutes! Check that it isn't frozen or dead! <---

still happening, 3-4 times per 24h

Topic: [1500 TH] p2pool: Decentralized, DoS-resistant, Hop-Proof pool - page 676. (Read 2591920 times)