I'm sure it was just my fresh eyes, I received my T2T this afternoon haha
Were you able to send a wire or did you get good BTC rate?
Topic: 17.2TH/s, 1570W Innosilicon announces the most powerful and efficient BTC Miner - page 4. (Read 6797 times)
August 29, 2018, 11:30:31 PM
Were you able to send a wire or did you get good BTC rate?
August 29, 2018, 08:19:15 PM
I'm sure it was just my fresh eyes, I received my T2T this afternoon haha
August 29, 2018, 04:20:31 PM
"Aug 29 15:28:23 InnoMiner cgminer[1319]: chain1: detected 93 chips"
According to the logs for my T2T there are 93 chips per chain.
According to the logs for my T2T there are 93 chips per chain.
I looked for that for so long!
thank you for posting it.
So 93 x 3 = 279
17,350/279 = 62 gh a chip at efficiency setting
I do about 1450 watts at k-watt meter so close to 5 watts a chip simple math says 5.197 watts but there are 2 fans and a controller.
These would be nice usb sticks
better yet 5 chip pods
hmm 25 watts and 310 gh
August 29, 2018, 03:21:52 PM
Yeah that's nice. Hey question, how many chips are there per board?
"Aug 29 15:28:23 InnoMiner cgminer[1319]: chain1: detected 93 chips"
According to the logs for my T2T there are 93 chips per chain.
August 27, 2018, 02:26:35 PM
Hey, that efficiency mode looks pretty good and shouldn't be a fire hazard.
We'll it's getting cooler in the north again. At least for us on the pacific. I would love to run one. At the price I paid for the last set of asics in Jan I could have 6 of T2T or 15 of another brand.
Looks like best price for these is coming with crypto payments and a wire send. Knock transaction fees down to balance out the wire cost. Real saving can hit or not at import.
August 27, 2018, 09:48:26 AM
Yeah that's nice. Hey question, how many chips are there per board?
Not sure but give me a minute or 2.
August 27, 2018, 08:34:51 AM
Yeah that's nice. Hey question, how many chips are there per board?
August 27, 2018, 08:18:26 AM
Hey, that efficiency mode looks pretty good and shouldn't be a fire hazard.
yeah and chips are about 53c with a room temp at 90f
August 27, 2018, 08:12:33 AM
Hey, that efficiency mode looks pretty good and shouldn't be a fire hazard.
August 27, 2018, 07:38:08 AM
So far at efficiency setting
I do 1450 watts at wall
and about 17340 gh which is 83.6 watts
It does better at night when garage is cooler.
I know of no other gear this efficient
I kept stock firmware as my unit is cool and fanspeed is a bit lower.
I wish they were cheaper in price as they are close to 1725 if you use crypto to pay.
1592 bank order
.255456 btc is 1724.52 at coinbase
30.14 ltc is 1743.29 at coinbase
I do like the 83.6 watts a lot. but it is a little bit under spec.
I should burn around 1398 watts to do 17340 hash not 1450
When room cools we will see if it improves.
I do 1450 watts at wall
and about 17340 gh which is 83.6 watts
It does better at night when garage is cooler.
I know of no other gear this efficient
I kept stock firmware as my unit is cool and fanspeed is a bit lower.
I wish they were cheaper in price as they are close to 1725 if you use crypto to pay.
1592 bank order
.255456 btc is 1724.52 at coinbase
30.14 ltc is 1743.29 at coinbase
I do like the 83.6 watts a lot. but it is a little bit under spec.
I should burn around 1398 watts to do 17340 hash not 1450
When room cools we will see if it improves.
August 27, 2018, 07:23:40 AM
INNOSILICON T2Turbo Miner has 4 work modes: Performance, Factory, Balanced & Efficiency. You can choose any kind of work modes as you wish. T2Turbo Miner will help you go through the bear market and occupy the leading position in the bull market. Learn more from http://www.innosilicon.com/html/overview/index.html
August 25, 2018, 10:42:31 PM
Brokers here are saying Inno's market conversion is getting better. Been able to catch decent pricing with BTC instead instead of wires more often.
August 24, 2018, 07:50:28 AM
Dear all,
Thank you all for feedback about the new firmware of T2T.
It maybe set fans to 90%. But fans will go down after running about one hour.
And we are also developing a new firmware to improve this problem.
Thank you so much.
Thank you all for feedback about the new firmware of T2T.
It maybe set fans to 90%. But fans will go down after running about one hour.
And we are also developing a new firmware to improve this problem.
Thank you so much.
Yes they did drop to 85%
and on efficiency setting it does very close to same watts per gh. say 83 or 84 a th vs 81 or 82.
I am doing all testing in a place where sound matters.
When I set up in solar array I will do newer firmware as sound does not matter.
I really want to thank you for giving the older file so I could roll back.
Bitmain was a fucking asshole about this with the s-9 for along time.
You guys did the right thing giving access to older file.
Thank you again.
August 24, 2018, 04:58:26 AM
Dear all,
Thank you all for feedback about the new firmware of T2T.
It maybe set fans to 90%. But fans will go down after running about one hour.
And we are also developing a new firmware to improve this problem.
Thank you so much.
August 24, 2018, 04:09:48 AM
To be on point kudos to Innosilicon they replied in under 20 hours with oem file
I ask on facebook they gave an answer.
I ask via pm they gave an answer.
I ask via email they gave an answer.
I am going to redo firmware now as fan speed on 85% is too loud.
It is back
and room is hot but fans dropped to 60% which is much better then 85%
power dropped to 1450 vs 1498
hash drops just a little say 18200 to 17700 waiting for auto tune to settle.
https://i.imgur.com/5y1W0JT.png
https://i.imgur.com/5MMs1Va.png
https://i.imgur.com/Xx77pDT.png
I ask on facebook they gave an answer.
I ask via pm they gave an answer.
I ask via email they gave an answer.
I am going to redo firmware now as fan speed on 85% is too loud.
It is back
and room is hot but fans dropped to 60% which is much better then 85%
power dropped to 1450 vs 1498
hash drops just a little say 18200 to 17700 waiting for auto tune to settle.
https://i.imgur.com/5y1W0JT.png
https://i.imgur.com/5MMs1Va.png
https://i.imgur.com/Xx77pDT.png
could you do performance mode when being on the newest firmware? i tried on TWO units and it wont stop autotuning, .. other modes its working fine
August 23, 2018, 02:44:35 PM
To be on point kudos to Innosilicon they replied in under 20 hours with oem file
I ask on facebook they gave an answer.
I ask via pm they gave an answer.
I ask via email they gave an answer.
I am going to redo firmware now as fan speed on 85% is too loud.
It is back
and room is hot but fans dropped to 60% which is much better then 85%
power dropped to 1450 vs 1498
hash drops just a little say 18200 to 17700 waiting for auto tune to settle.
I ask on facebook they gave an answer.
I ask via pm they gave an answer.
I ask via email they gave an answer.
I am going to redo firmware now as fan speed on 85% is too loud.
It is back
and room is hot but fans dropped to 60% which is much better then 85%
power dropped to 1450 vs 1498
hash drops just a little say 18200 to 17700 waiting for auto tune to settle.
August 23, 2018, 01:33:56 PM
Naw, playing the straight man has nothing to do with sexual preference. If someone tries to take it otherwise, that's an opportunity to educate someone on a historic staple of comedy.
Oh yeah, still haven't heard back from Inno about chips. Might buy me one of them miners though, you know, to mine with. Definitely not to take apart.
Oh yeah, still haven't heard back from Inno about chips. Might buy me one of them miners though, you know, to mine with. Definitely not to take apart.
There might be a couple heading your way already
August 22, 2018, 11:55:12 PM
I got a reply on facebook
I have the oem file
/Users/macmini/Desktop/T2Turbo Firmware/t2t_20180803_112014.swu
https://drive.google.com/file/d/1UsOjQnBMx2FxCqRmJEvdeRSgjwUhfI5W/view
I will fuck with it tomorrow.
I have the oem file
/Users/macmini/Desktop/T2Turbo Firmware/t2t_20180803_112014.swu
https://drive.google.com/file/d/1UsOjQnBMx2FxCqRmJEvdeRSgjwUhfI5W/view
I will fuck with it tomorrow.
Missed this a bit ago, but look at those social media people get shit done.
August 22, 2018, 11:01:35 PM
Naw, playing the straight man has nothing to do with sexual preference. If someone tries to take it otherwise, that's an opportunity to educate someone on a historic staple of comedy.
Oh yeah, still haven't heard back from Inno about chips. Might buy me one of them miners though, you know, to mine with. Definitely not to take apart.
Oh yeah, still haven't heard back from Inno about chips. Might buy me one of them miners though, you know, to mine with. Definitely not to take apart.
I almost stip up my beer on that last bit.
We were talking about john candy the other day and then someone confused him with chirs farley. I got upset, someone got educated.
August 22, 2018, 10:55:45 PM
Naw, playing the straight man has nothing to do with sexual preference. If someone tries to take it otherwise, that's an opportunity to educate someone on a historic staple of comedy.
Oh yeah, still haven't heard back from Inno about chips. Might buy me one of them miners though, you know, to mine with. Definitely not to take apart.
Oh yeah, still haven't heard back from Inno about chips. Might buy me one of them miners though, you know, to mine with. Definitely not to take apart.
Jump to: