No but seriously, I hope that it plays out good for you Sidehack.
You're doing great job for the mining community.
Topic: 17.2TH/s, 1570W Innosilicon announces the most powerful and efficient BTC Miner - page 7. (Read 6797 times)
August 11, 2018, 07:44:32 PM
"Can I buy some chips? xD"
No but seriously, I hope that it plays out good for you Sidehack.
You're doing great job for the mining community.
No but seriously, I hope that it plays out good for you Sidehack.
You're doing great job for the mining community.
August 11, 2018, 07:18:37 PM
Use lots of smiley faces so they have to be cheerful on every request.
Nice idea
August 11, 2018, 10:29:05 AM
I can't say whether they will or won't sell chips yet, but they're talking with me, so that's good news. I'm hopeful.
Use lots of smiley faces so they have to be cheerful on every request.
August 09, 2018, 04:06:18 PM
I can't say whether they will or won't sell chips yet, but they're talking with me, so that's good news. I'm hopeful.
August 09, 2018, 03:47:55 PM
Innosilicon said they are gonna sell chips in a Youtube video, i have to find again, i wonder if they really will if they do ?,will side hack finally be able to make some high end miners for us at a lower cost then they sell them for or even boards that fit Antminer cases sense they seem cheaper and easier to get ? . or will Innosilicon pull there usually BS and charge out the ass for chips or make the chip buyer ,buy more chips then they need .
August 07, 2018, 04:32:43 PM
The problem is that even if you mine at subzero temperatures and the miner itself runs cool not needing high fanspeed, the PSU that's built into these still runs its fans flat out and they're those horrible little 40mm fans. Nothing can quieten that part down no matter how low speed you run the miner.
Yes, I know my M3s PSUs were awful. It'd be interesting to find a way to compare just PSU DB over a range of temps and wattage.
August 07, 2018, 04:31:16 PM
The problem is that even if you mine at subzero temperatures and the miner itself runs cool not needing high fanspeed, the PSU that's built into these still runs its fans flat out and they're those horrible little 40mm fans. Nothing can quieten that part down no matter how low speed you run the miner.
Yea, you could run off an desktop atx which is "home friendly" but the sound of 120mm's will still be loud at 30% then you're downclocking considerably.
August 07, 2018, 04:27:56 PM
Is there any way to make these, T2T, less noisy? I've turned mine right down to efficency setting and still it is running very loud. Update the firmware as well but I think the wife might murder me if I can't make it quieter.
The problem is that even if you mine at subzero temperatures and the miner itself runs cool not needing high fanspeed, the PSU that's built into these still runs its fans flat out and they're those horrible little 40mm fans. Nothing can quieten that part down no matter how low speed you run the miner. August 07, 2018, 03:23:38 PM
he needs a box system .
I have been lazy and not done a video on my new design.
it involves
https://www.amazon.com/Tonyko%C2%AE-Fiberglass-Fire-Blanket-39-inch/dp/B01MG8X32X/ref=sr_1_2_sspa?
https://www.homedepot.com/p/UltraTouch-48-in-x-24-ft-Radiant-Barrier-30000-11424/100661257
and a wooden diy bench much like this shape
https://www.wayfair.com/furniture/pdp/three-posts-amalfi-upholstered-storage-bench-thps1456.html
line the inside with the radiant barrier then the fiber glass blanket .
access is by opening lid
air in from a circle hole inside air exits from a hole in the side most convent for you
I have been lazy and not done a video on my new design.
it involves
https://www.amazon.com/Tonyko%C2%AE-Fiberglass-Fire-Blanket-39-inch/dp/B01MG8X32X/ref=sr_1_2_sspa?
https://www.homedepot.com/p/UltraTouch-48-in-x-24-ft-Radiant-Barrier-30000-11424/100661257
and a wooden diy bench much like this shape
https://www.wayfair.com/furniture/pdp/three-posts-amalfi-upholstered-storage-bench-thps1456.html
line the inside with the radiant barrier then the fiber glass blanket .
access is by opening lid
air in from a circle hole inside air exits from a hole in the side most convent for you
August 07, 2018, 10:33:33 AM
Is there any way to make these, T2T, less noisy? I've turned mine right down to efficency setting and still it is running very loud. Update the firmware as well but I think the wife might murder me if I can't make it quieter.
Build box for it, some guides around here and on the web. There are some that are premade as well. Maybe ear plugs for her?
I'd post in mining support and maybe someone with great tech knowledge can help your drop fan speed but I imagine you'll want to decrease frequency as well or you'll risk buring chips or something else like your house.
August 07, 2018, 10:30:44 AM
Thanks I did have the S3 and was hoping it would be a little less of an ear blasting than that. Looked the web but not found anything on cooling but I am the worlds worst for finding answers from there.
August 07, 2018, 10:22:54 AM
Is there any way to make these, T2T, less noisy? I've turned mine right down to efficency setting and still it is running very loud. Update the firmware as well but I think the wife might murder me if I can't make it quieter.
Noise and heat, it's what makes an ASIC miner an ASIC miner
There's quite a few guides and posts on how to quiet an ASIC down, but be careful, a lot of them will make it run very hot.
August 07, 2018, 10:21:39 AM
Is there any way to make these, T2T, less noisy? I've turned mine right down to efficency setting and still it is running very loud. Update the firmware as well but I think the wife might murder me if I can't make it quieter.
It is a industrial level miner device, it is mean't to be freakin' loud.
August 07, 2018, 10:18:40 AM
Is there any way to make these, T2T, less noisy? I've turned mine right down to efficency setting and still it is running very loud. Update the firmware as well but I think the wife might murder me if I can't make it quieter.
August 05, 2018, 11:19:05 AM
Thanks Phil, glad to have a dedicated community member as a confirmed buyer. Now we just got to get you that T2T for your video review!
August 05, 2018, 10:37:25 AM
Here is the deal I decided to order from minefarmbuy I paid $1800 today.
I will post a review on both the gear and on the reseller minefarmbuy.
I paid full price on the website of minefarmbuy today.
I was pm'd this pm today
I ordered 1 unit a t2 turbo I paid in full zero discounts.
My pm's back to him are as follows:
@@@@@@@@@@@@
@@@@@@@@@@@@@@@@
Note no discounts full price.
I pm'd Inno_Asic
on the 31st of JULY and was ignored.
But minefarmbuy did not ignore me.
here is the pm to Inno_Asic
Since I do as many reviews as I can and sometimes pay in full for the gear I have limits to what I can do.
this Monday I will be getting Avalon 851's at no cost to me I will review them.
I will be getting the T2 turbo from minefarmbuy at full cost to me I hope by Sept 1 to Sept 10 --- full cost was 1800
I will be getting two acorns 215+ and a x2g nest at full cost to me I hope by Oct 1-------------------- full cost was 792 I think
I will be getting pangolin/whatsminer M10 price to be determined I hope in sept.
Thanks again to minefarmbuy
I will post a review on both the gear and on the reseller minefarmbuy.
I paid full price on the website of minefarmbuy today.
I was pm'd this pm today
How did your T2T order work out? Sales says their still seeing 1.7k consistently from them driectly for BTC
I had them send me their a quote for the unit, looks like customs included we're charging $1732 for BTC (routed through wire) or any coin and the $1800 credit card price is sticking.
Hoping you jumped in on the $1.6k pricing that was displaying for a minute. It would be nice if they didn't gouge in shipping and offered better crypto rates. :/
I had them send me their a quote for the unit, looks like customs included we're charging $1732 for BTC (routed through wire) or any coin and the $1800 credit card price is sticking.
Hoping you jumped in on the $1.6k pricing that was displaying for a minute. It would be nice if they didn't gouge in shipping and offered better crypto rates. :/
I ordered 1 unit a t2 turbo I paid in full zero discounts.
My pm's back to him are as follows:
Missed it at 1.6 . I am in the middle of a bathroom renovation got tied up and did not place the order.
I am going back to your website today and doing a cc order.
I am going back to your website today and doing a cc order.
@@@@@@@@@@@@
@@@@@@@@@@@@@@@@
I just ordered from your company.
Order Number: #1000xxxx
1 T2 turbo
$1800.00
please make sure I get it.
thanks , phil
Order Number: #1000xxxx
1 T2 turbo
$1800.00
please make sure I get it.
thanks , phil
Note no discounts full price.
I pm'd Inno_Asic
on the 31st of JULY and was ignored.
But minefarmbuy did not ignore me.
here is the pm to Inno_Asic
Would like to order a Turbo miner
https://bitcointalksearch.org/topic/m.41574375
https://bitcointalksearch.org/topic/m.42971473
you posted this today
https://bitcointalksearch.org/topic/m.43214668
I am willing to show how good it is compared to your T1
I do reviews on bitcoin talk and do youtube videos on lots of miners.
I would also want to order an A10
Let me know if you can help me out to get them.
here is my email
[Redacted]
I will be doing
the Avalon 851
and the Pangolin M10
I want to add your 2 to the list.
I did do both the T1 and the B52 on my youtube channel
Thanks for your time to read this.
https://bitcointalksearch.org/topic/m.41574375
https://bitcointalksearch.org/topic/m.42971473
you posted this today
https://bitcointalksearch.org/topic/m.43214668
I am willing to show how good it is compared to your T1
I do reviews on bitcoin talk and do youtube videos on lots of miners.
I would also want to order an A10
Let me know if you can help me out to get them.
here is my email
[Redacted]
I will be doing
the Avalon 851
and the Pangolin M10
I want to add your 2 to the list.
I did do both the T1 and the B52 on my youtube channel
Thanks for your time to read this.
Since I do as many reviews as I can and sometimes pay in full for the gear I have limits to what I can do.
this Monday I will be getting Avalon 851's at no cost to me I will review them.
I will be getting the T2 turbo from minefarmbuy at full cost to me I hope by Sept 1 to Sept 10 --- full cost was 1800
I will be getting two acorns 215+ and a x2g nest at full cost to me I hope by Oct 1-------------------- full cost was 792 I think
I will be getting pangolin/whatsminer M10 price to be determined I hope in sept.
Thanks again to minefarmbuy
August 05, 2018, 09:12:57 AM
Shipping for these unit starts mid month, so just depends in when you ordered compared to everyone else but shipping is DHL, once the order is shipped it's typically delivered in a couple days for us in the US.
August 05, 2018, 08:21:16 AM
Has anyone on this forum purchased an order of these? I'm wondering what their experience with Inno's shipping is like.
August 04, 2018, 02:03:37 PM
Tha would be me and some others I just saw shift in cost and will order direct from them in about 10 minutes.
You need a refund? PM me your order/invoice number and I'll get sales on it now. We're still seeing fluctuation, so be careful. Right now at $6982/bitcoin Inno's is asking for .243539 BTC roughly $1.7k.
Seems we'll be taking the conservative approach and continue to factor USD wire into our pricing for quotes, our web orders will default to wire automatically for consistency. It's nice with our model any left over funds are returned. Still, we're trying to figure out when their market calls are updating. Will update soon I hope.
August 04, 2018, 12:31:35 PM
Looks like Inno's BTC rate is much closer. Not sure what our pricing on coin is now but I imagine it's roughly that $40-50 range less. We'll see the same slight drop in our web prices at some point to adjust for no longer needing using wires for better pricing through them (unless of course requested to do so).
Edit: For those here who reached out me about orders on this, if you did place one with us and it's not submitted to Inno yet let me know if you want a refund I'll expedite it since it's the weekend. Obviously you'll save more if you order directly from Inno with BTC.
Edit: For those here who reached out me about orders on this, if you did place one with us and it's not submitted to Inno yet let me know if you want a refund I'll expedite it since it's the weekend. Obviously you'll save more if you order directly from Inno with BTC.
Tha would be me and some others I just saw shift in cost and will order direct from them in about 10 minutes.
Jump to: