17.2TH/s, 1570W Innosilicon announces the most powerful and efficient BTC Miner - page 5.

minefarmbuy

full member

Activity: 1022

Merit: 221

We are not retail.

Quote from: sidehack on August 22, 2018, 11:35:46 PM

Quote from: philipma1957 on August 22, 2018, 09:52:54 PM

I will fuck with it tomorrow.

I have found over the years that if one takes profanity literally, the world is a much funnier place.

I find it odd my I missed such a deliberate set up. Or was I playing the straight man?

Do people even use that phrase anymore? Could be found derogatory to hetero males some. .. Oh and a T2T or something.

sidehack

legendary

Activity: 3318

Merit: 1848

Curmudgeonly hardware guy

Quote from: philipma1957 on August 22, 2018, 09:52:54 PM

I will fuck with it tomorrow.

I have found over the years that if one takes profanity literally, the world is a much funnier place.

minefarmbuy

full member

Activity: 1022

Merit: 221

We are not retail.

Quote from: sidehack on August 22, 2018, 10:06:43 PM

Watch out the fan doesn't take off your john thomas.

A little worried what one might be doing for this to occur. .. Wink

philipma1957

legendary

Activity: 4116

Merit: 7849

'The right to privacy matters'

Quote from: sidehack on August 22, 2018, 10:06:43 PM

Watch out the fan doesn't take off your john thomas.

My Mr Johnson will be well protected.

Once I get the fans down to 50%

I will tear down the psu.

I will try to get it to be cool but quiet.

I have some high quality fans.

I would love to swap the stock fans and run them at 50%.

Along with the psu mod.

I think it will be okay and not that loud.

sidehack

legendary

Activity: 3318

Merit: 1848

Curmudgeonly hardware guy

Watch out the fan doesn't take off your john thomas.

philipma1957

legendary

Activity: 4116

Merit: 7849

'The right to privacy matters'

I got a reply on facebook

I have the oem file

/Users/macmini/Desktop/T2Turbo Firmware/t2t_20180803_112014.swu

https://drive.google.com/file/d/1UsOjQnBMx2FxCqRmJEvdeRSgjwUhfI5W/view

I will fuck with it tomorrow.

minefarmbuy

full member

Activity: 1022

Merit: 221

We are not retail.

Yea, still about 5 hours till reasonable am there, and then a full 8 hours for a work day after that. I'll email your broker and see what they say for us.

philipma1957

legendary

Activity: 4116

Merit: 7849

'The right to privacy matters'

Quote from: minefarmbuy on August 22, 2018, 01:30:34 PM

Why even bother releasing the update. . ..

They should have the firmware posted for roll back. Philip, not to poke the bear but a basic reply is all I might expect from their forum account. Hopefully once they get to business hours over there they'll update and list the original firmware. We'll give them a chance to help us out.

yeah I will wait but as for now the new august 14 update is unacceptable garbage 90% fans vs 50% fans 85 watts a th vs 82 watts a th.

100 watts more power for 1th more hash which is not what I wanted for efficiency setting.

I would have preferred 0 watts more power for .5th hash

or 100 watts less for 1th less

which would be 1350 watts and 17 th or 79 watts per 1th

I sent an email to support. I will wait to see if they reply.

sidehack

legendary

Activity: 3318

Merit: 1848

Curmudgeonly hardware guy

Is there a "back up existing firmware" option, where someone with the original build can archive it?

minefarmbuy

full member

Activity: 1022

Merit: 221

We are not retail.

Why even bother releasing the update. . ..

They should have the firmware posted for roll back. Philip, not to poke the bear but a basic reply is all I might expect from their forum account. Hopefully once they get to business hours over there they'll update and list the original firmware. We'll give them a chance to help us out.

philipma1957

legendary

Activity: 4116

Merit: 7849

'The right to privacy matters'

Quote from: vincl on August 22, 2018, 11:49:10 AM

so inno optimization for temperature:

"hey, just lets increase fan speed!" .... lol

hey do you have the original firmware?

can you show this page in my pm if you want to?

philipma1957

legendary

Activity: 4116

Merit: 7849

'The right to privacy matters'

I just did a factory reset.

we will see if it rolls back firmware.

it did not roll back the firmware.

and while this firmware works it uses more power per th
and has 90% fan speed.

I now burn 1500 watts at efficiency
I used to burn 1450 watts at efficiency

my fans were 50%
my fans are 90%

I don't have the original link to roll back to.

So I will wait one day for an original file then mark negative everywhere that I can.

vincl

member

Activity: 386

Merit: 18

so inno optimization for temperature:

"hey, just lets increase fan speed!" .... lol

philipma1957

legendary

Activity: 4116

Merit: 7849

'The right to privacy matters'

Quote from: minefarmbuy on August 22, 2018, 11:07:03 AM

Can you or anyone else read decibel level or give a general opinion on noise level?

well the firmware upgrade fucked up the noise level since it boosted fan speed.

It was far better then an s9

fan speed was 50 and temps were 63c for efficiency

fan speed was 73 and temps were 63c for balanced

now

fan speed is 90% and temps are 50c for efficiency
fan speed is 90% and temps are 56c for balanced

so typical innosilicon BS which is why I never purchased a unit from them until I got this one from you.

I will keep this one and if I can not roll back firmware I won't be buying anymore.

I will also mark all innosilicon products with neg feedback if I can not roll back this upgrade.
and mark all innosilicon reps with negative feedback if I am unable to roll back this firmware.

Only because I asked a specific question and was given what I suspected was a false fake answer.
my question:

Quote from: philipma1957 on August 21, 2018, 11:52:05 PM

Okay. My unit showed up the other day Monday the 20th.

I get about 17500 th at 1450 watts.

This is close to 82 watts a th.

It is a good number

So what does the firmware do?

Optimize hash. Does not mean optimize power.

So. Will hash go up and power go up? = not what I want.

Will hash go up and power stay the same = very good

Will hash stay the same and power drop = best

I have only made one purchase from you this unit.

I don’t want high power use

fake reply:

Quote from: Inno_ASIC on August 22, 2018, 01:49:22 AM

Dear Valuable Innosilicon Miner User,

We’re glad to inform you that the firmware of T2 has been optimized again though unremitting efforts of our Innosilicon Firmware team.

For your better user experience, please download onto:
http://www.innosilicon.com.cn/download/t2_20180814_100830.swu

Upated items:
- Improved the over-temperature protection performance;
- Optimized the start-up process of miners;

You can upgrade the firmware as shown below:

http://www.innosilicon.com/statics/images/20180822134042.png

Please send email or add Skype [email protected] to our technical support team if you meet some problem when you update the firmware.

Thank you.

Innosilicon customer service team

minefarmbuy

full member

Activity: 1022

Merit: 221

We are not retail.

Can you or anyone else read decibel level or give a general opinion on noise level?

philipma1957

legendary

Activity: 4116

Merit: 7849

'The right to privacy matters'

Quote from: minefarmbuy on August 22, 2018, 10:36:53 AM

I agree, more specific notes on the updates would be nice. For me though if it was working well why touch it but then you're proposes and skills are a lot different.

Others, be careful as we're talking T2 and T2T in here, so watch what firmware you're using on which unit.

yeah part of doing these reviews is so that others don't take the risk of shit firmware upgrade.

so I did the up grade to this one

For your better user experience, please download onto:
http://www.innosilicon.com.cn/download/t2t_20180814_092800.swu

and my balanced is now at 20.49 but the power moved to 1876 watts so 1876 / 20490 = 91.5 watts a th which is not as good as the numbers before which were 89 watts a th.

I will check efficiency setting next.

and fans are faster but unit is cool. 57 c

so about 1 more th and 110 more watts for balanced. this is all fine and good if btc jumps higher. but instead of giving less watts and the same hash better watts per th

it is more watts and more hash worse watts per th exactly what I did not want.

I will test balanced next
I will also attempt to roll back firmware after that which may not be possible since I don't have that file

And @ Inno_Asic give me a link for original firmware not the newest.

For your better user experience, please download onto:
http://www.innosilicon.com.cn/download/t2t_20180814_092800.swu

For your better user experience, please download onto:
http://www.innosilicon.com.cn/download/t2_20180814_100830.swu

So I have the two above
give me the first one that came with the machine

Note T2Turbo is what I have

minefarmbuy

full member

Activity: 1022

Merit: 221

We are not retail.

Quote from: philipma1957 on August 21, 2018, 11:52:05 PM

Okay. My unit showed up the other day Monday the 20th.

I get about 17500 th at 1450 watts.

This is close to 82 watts a th.

It is a good number

So what does the firmware do?

Optimize hash. Does not mean optimize power.

So. Will hash go up and power go up? = not what I want.

Will hash go up and power stay the same = very good

Will hash stay the same and power drop = best

I have only made one purchase from you this unit.

I don’t want high power use

I agree, more specific notes on the updates would be nice. For me though if it was working well why touch it but then you're proposes and skills are a lot different.

Others, be careful as we're talking T2 and T2T in here, so watch what firmware you're using on which unit.

Inno_ASIC

full member

Activity: 243

Merit: 108

Innosilicon ASIC official representative

Dear Valuable Innosilicon Miner User,

We’re glad to inform you that the firmware of T2 has been optimized again though unremitting efforts of our Innosilicon Firmware team.

For your better user experience, please download onto:
http://www.innosilicon.com.cn/download/t2_20180814_100830.swu

Upated items:
- Improved the over-temperature protection performance;
- Optimized the start-up process of miners;

You can upgrade the firmware as shown below:

http://www.innosilicon.com/statics/images/20180822134042.png

Please send email or add Skype [email protected] to our technical support team if you meet some problem when you update the firmware.

Thank you.

Innosilicon customer service team

philipma1957

legendary

Activity: 4116

Merit: 7849

'The right to privacy matters'

Okay. My unit showed up the other day Monday the 20th.

I get about 17500 th at 1450 watts.

This is close to 82 watts a th.

It is a good number

So what does the firmware do?

Optimize hash. Does not mean optimize power.

So. Will hash go up and power go up? = not what I want.

Will hash go up and power stay the same = very good

Will hash stay the same and power drop = best

I have only made one purchase from you this unit.

I don’t want high power use

sidehack

legendary

Activity: 3318

Merit: 1848

Curmudgeonly hardware guy

Well like I said, I emailed with no response so then I messaged this forum account asking about bitcoin mining ASICs, as the press release stated they'd be made available to integrators. I was asked which chip I had interest in on the 8th, and have had no response since then. So, maybe an update? Some kind of communication?

Topic: 17.2TH/s, 1570W Innosilicon announces the most powerful and efficient BTC Miner - page 5. (Read 6724 times)