there was a video of few + rx5700 doing ~1600-1700 and you say the same for one without screens not info, and just troll
thats my 5700
https://i.imgur.com/j9yzru5.jpg
Topic: [AMD] New AMD RX Graphics Cards of 2019 - RX 5700 / XT, RX 600 - page 15. (Read 23334 times)
thats my 5700
https://i.imgur.com/j9yzru5.jpg
there was a video of few + rx5700 doing ~1600-1700 and you say the same for one without screens not info, and just troll
I was able to get around 1630h/s with my regular 5700 card by running two threads on XMR Stak last night. watts was around 150 off the kilowatt wall meter
Algo was Cryptonight GPU
Algo was Cryptonight GPU
this is your 3th post and you lie, why
why am I lying?
I was able to get around 1630h/s with my regular 5700 card by running two threads on XMR Stak last night. watts was around 150 off the kilowatt wall meter
Algo was Cryptonight GPU
Algo was Cryptonight GPU
this is your 3th post and you lie, why
I was able to get around 1630h/s with my regular 5700 card by running two threads on XMR Stak last night. watts was around 150 off the kilowatt wall meter
Algo was Cryptonight GPU
Algo was Cryptonight GPU
Can someone with RX 5700 try SRB 1.9.3 , it should now compile, but i couldn't test it because i don't own this gpu.
Also if it works then probably the parameters that auto setup gives will be bad. so playing with intensity,worksize,fragments can get better results.
https://bitcointalksearch.org/topic/m.51925083
Also if it works then probably the parameters that auto setup gives will be bad. so playing with intensity,worksize,fragments can get better results.
https://bitcointalksearch.org/topic/m.51925083
what i don't get is why cryptonight/gpu from ryocoin works, whats the difference? i mean, i have to start xmrstak in low priority and the mouse freezes every 2 seconds for a half, but that could be the driver...
The mouse freezing problem is probably driver issue. You should reinstall it.
what i don't get is why cryptonight/gpu from ryocoin works, whats the difference? i mean, i have to start xmrstak in low priority and the mouse freezes every 2 seconds for a half, but that could be the driver...
We have kernels for Navi - RDNA isn't that different from GCN. The problem is that the GPUs are "locked down" for ethash mining by either limiting the number of TLB entries, or lowering the page size. This may be unintentional but we suspect that it is by design, probably to prevent miners from buying out all Navi GPUs and leaving the gamers with high prices and low availability. RX5700 is the first very competitive AMD gaming GPU since Polaris, so they probably want to win some market share as far as gaming market goes. We hope that this is not hardware limitation and a future driver will remove it but only time will tell.
With the current no-so-great mining profitability, they really didn't have to do this but it's absolutely their choice, and with the current prices of Polaris, it is still one of the best cards for ethash mining. If the Navi cards weren't locked down, they would achieve hashrate in the 50 MH/s ballpark. We are still working on some kind of workaround but it doesn't look good at this moment.
With the current no-so-great mining profitability, they really didn't have to do this but it's absolutely their choice, and with the current prices of Polaris, it is still one of the best cards for ethash mining. If the Navi cards weren't locked down, they would achieve hashrate in the 50 MH/s ballpark. We are still working on some kind of workaround but it doesn't look good at this moment.
Enumerating OpenCL devices, please wait...
GPU0: AMD Radeon RX 5700 [gfx1010] [8176 MB][CU: 18][I: 100.0][W: 8][T: 2][F: 0][BUS: 3]
-----------------------------------------------------------------------------------------
SRBMiner Cryptonight AMD GPU miner 1.9.2
DevFee ~0.85%
Press 's' to display stats
Press 'h' to display hashrate
Press 'r' to reload pools
Press 'p' to switch to the next pool
Press 'o' to switch to the previous pool
Press 0-9 to disable/enable GPU 0-9, shift+0-9 for GPU 10-19
-----------------------------------------------------------------------------------------
Algorithm : Cryptonight Gpu
Algo switching : disabled
Coin forking : disabled
Gpu watchdog : enabled [normal mode]
Startup monitor : enabled
Tweaking : disabled
[2019-07-21 21:46:33] Pools defined -> 1
[2019-07-21 21:46:33] Tweaking disabled - no supported devices found
3 errors generated.
[2019-07-21 21:46:34] Error CL_COMPILE_PROGRAM_FAILURE when calling clCompileProgram [ctx->Program] for DeviceID 0 (Thread 0)
Error while creating GPU threads.. Stopping miner process.
Shutting down miner...
C:\Users\user\Desktop\srbminer192>
GPU0: AMD Radeon RX 5700 [gfx1010] [8176 MB][CU: 18][I: 100.0][W: 8][T: 2][F: 0][BUS: 3]
-----------------------------------------------------------------------------------------
SRBMiner Cryptonight AMD GPU miner 1.9.2
DevFee ~0.85%
Press 's' to display stats
Press 'h' to display hashrate
Press 'r' to reload pools
Press 'p' to switch to the next pool
Press 'o' to switch to the previous pool
Press 0-9 to disable/enable GPU 0-9, shift+0-9 for GPU 10-19
-----------------------------------------------------------------------------------------
Algorithm : Cryptonight Gpu
Algo switching : disabled
Coin forking : disabled
Gpu watchdog : enabled [normal mode]
Startup monitor : enabled
Tweaking : disabled
[2019-07-21 21:46:33] Pools defined -> 1
[2019-07-21 21:46:33] Tweaking disabled - no supported devices found
3 errors generated.
[2019-07-21 21:46:34] Error CL_COMPILE_PROGRAM_FAILURE when calling clCompileProgram [ctx->Program] for DeviceID 0 (Thread 0)
Error while creating GPU threads.. Stopping miner process.
Shutting down miner...
C:\Users\user\Desktop\srbminer192>
Ouch, wonder why no one has reported this, i will look into it, thank you
Edit:
I wonder why the driver reports the card has 18 compute units, that card has 36 CU's no ?
I believe XMR stak states the same thing about the compute units.
Enumerating OpenCL devices, please wait...
GPU0: AMD Radeon RX 5700 [gfx1010] [8176 MB][CU: 18][I: 100.0][W: 8][T: 2][F: 0][BUS: 3]
-----------------------------------------------------------------------------------------
SRBMiner Cryptonight AMD GPU miner 1.9.2
DevFee ~0.85%
Press 's' to display stats
Press 'h' to display hashrate
Press 'r' to reload pools
Press 'p' to switch to the next pool
Press 'o' to switch to the previous pool
Press 0-9 to disable/enable GPU 0-9, shift+0-9 for GPU 10-19
-----------------------------------------------------------------------------------------
Algorithm : Cryptonight Gpu
Algo switching : disabled
Coin forking : disabled
Gpu watchdog : enabled [normal mode]
Startup monitor : enabled
Tweaking : disabled
[2019-07-21 21:46:33] Pools defined -> 1
[2019-07-21 21:46:33] Tweaking disabled - no supported devices found
3 errors generated.
[2019-07-21 21:46:34] Error CL_COMPILE_PROGRAM_FAILURE when calling clCompileProgram [ctx->Program] for DeviceID 0 (Thread 0)
Error while creating GPU threads.. Stopping miner process.
Shutting down miner...
C:\Users\user\Desktop\srbminer192>
GPU0: AMD Radeon RX 5700 [gfx1010] [8176 MB][CU: 18][I: 100.0][W: 8][T: 2][F: 0][BUS: 3]
-----------------------------------------------------------------------------------------
SRBMiner Cryptonight AMD GPU miner 1.9.2
DevFee ~0.85%
Press 's' to display stats
Press 'h' to display hashrate
Press 'r' to reload pools
Press 'p' to switch to the next pool
Press 'o' to switch to the previous pool
Press 0-9 to disable/enable GPU 0-9, shift+0-9 for GPU 10-19
-----------------------------------------------------------------------------------------
Algorithm : Cryptonight Gpu
Algo switching : disabled
Coin forking : disabled
Gpu watchdog : enabled [normal mode]
Startup monitor : enabled
Tweaking : disabled
[2019-07-21 21:46:33] Pools defined -> 1
[2019-07-21 21:46:33] Tweaking disabled - no supported devices found
3 errors generated.
[2019-07-21 21:46:34] Error CL_COMPILE_PROGRAM_FAILURE when calling clCompileProgram [ctx->Program] for DeviceID 0 (Thread 0)
Error while creating GPU threads.. Stopping miner process.
Shutting down miner...
C:\Users\user\Desktop\srbminer192>
Ouch, wonder why no one has reported this, i will look into it, thank you
Edit:
I wonder why the driver reports the card has 18 compute units, that card has 36 CU's no ?
have you tried the last version XMR-Stak 2.10.6 that was released a few hours ago ?
Enumerating OpenCL devices, please wait...
GPU0: AMD Radeon RX 5700 [gfx1010] [8176 MB][CU: 18][I: 100.0][W: 8][T: 2][F: 0][BUS: 3]
-----------------------------------------------------------------------------------------
SRBMiner Cryptonight AMD GPU miner 1.9.2
DevFee ~0.85%
Press 's' to display stats
Press 'h' to display hashrate
Press 'r' to reload pools
Press 'p' to switch to the next pool
Press 'o' to switch to the previous pool
Press 0-9 to disable/enable GPU 0-9, shift+0-9 for GPU 10-19
-----------------------------------------------------------------------------------------
Algorithm : Cryptonight Gpu
Algo switching : disabled
Coin forking : disabled
Gpu watchdog : enabled [normal mode]
Startup monitor : enabled
Tweaking : disabled
[2019-07-21 21:46:33] Pools defined -> 1
[2019-07-21 21:46:33] Tweaking disabled - no supported devices found
3 errors generated.
[2019-07-21 21:46:34] Error CL_COMPILE_PROGRAM_FAILURE when calling clCompileProgram [ctx->Program] for DeviceID 0 (Thread 0)
Error while creating GPU threads.. Stopping miner process.
Shutting down miner...
C:\Users\user\Desktop\srbminer192>
FIY xmrig amd on cn/gpu yields ~300h/s with intensity 1700
GPU0: AMD Radeon RX 5700 [gfx1010] [8176 MB][CU: 18][I: 100.0][W: 8][T: 2][F: 0][BUS: 3]
-----------------------------------------------------------------------------------------
SRBMiner Cryptonight AMD GPU miner 1.9.2
DevFee ~0.85%
Press 's' to display stats
Press 'h' to display hashrate
Press 'r' to reload pools
Press 'p' to switch to the next pool
Press 'o' to switch to the previous pool
Press 0-9 to disable/enable GPU 0-9, shift+0-9 for GPU 10-19
-----------------------------------------------------------------------------------------
Algorithm : Cryptonight Gpu
Algo switching : disabled
Coin forking : disabled
Gpu watchdog : enabled [normal mode]
Startup monitor : enabled
Tweaking : disabled
[2019-07-21 21:46:33] Pools defined -> 1
[2019-07-21 21:46:33] Tweaking disabled - no supported devices found
3 errors generated.
[2019-07-21 21:46:34] Error CL_COMPILE_PROGRAM_FAILURE when calling clCompileProgram [ctx->Program] for DeviceID 0 (Thread 0)
Error while creating GPU threads.. Stopping miner process.
Shutting down miner...
C:\Users\user\Desktop\srbminer192>
FIY xmrig amd on cn/gpu yields ~300h/s with intensity 1700
My regular RX 5700 does 1300 H/s on XMR stak cryptonight GPU on stock settings.
5700 1300h5700xt 1500h
rx 5700 NOT xt 1200 h/s @ 1200/850 @ 80W
overclockd maybe 1700
Can you try latest SRB 1.9.2 with GPU algo and share the results ?
It has better results on Vegas than Xmr Stak, i wonder is this the case on 5700 too.
Thanks
My regular RX 5700 does 1300 H/s on XMR stak cryptonight GPU on stock settings.
5700 1300h5700xt 1500h
rx 5700 NOT xt 1200 h/s @ 1200/850 @ 80W
overclockd maybe 1700
About eth it's 3mh .. 
, things are not yet optimised
This is sensors while mining cryptonight-gpu ( stock )
https://i.ibb.co/XyhCpcV/sensors.jpg
, things are not yet optimisedThis is sensors while mining cryptonight-gpu ( stock )
https://i.ibb.co/XyhCpcV/sensors.jpg
Rx 5700/XT convo only please.
Take the shilling to the scam section of the website
My regular RX 5700 does 1300 H/s on XMR stak cryptonight GPU on stock settings.
Take the shilling to the scam section of the website
My regular RX 5700 does 1300 H/s on XMR stak cryptonight GPU on stock settings.
Hi, with my 5700XT , the only algo I can mine is cryptonight-gpu , with xmr-stak. ~1800
Hi!What version of the miner and driver are you using?
take a screen shot by GPU-Z
Why? HWinfo is more precise (if we talk about power consumption)
Jump to: