Anyone else can;t get Trixx, Afterburner, or even gpuz to show clocks with 5xx cards with modded vbios? And hopefully know a workaround.
None of them show the clocks, or anything else, and I can't change anything either. GpuZ shows the wattage used, but not much else. The drivers are cobbled together so 7 cards will run. Using Trixx on one machine I'm able to at least see the clocks by hitting the stealth button, make changes, and save................but none of the changes apply or when they loaded they can't be applied. Hitting "apply" doesn't do a dam thing.
Right now the only way to make/apply changes is putting them in the .bat that Claymore uses. It is rather annoying.
None of them show the clocks, or anything else, and I can't change anything either. GpuZ shows the wattage used, but not much else. The drivers are cobbled together so 7 cards will run. Using Trixx on one machine I'm able to at least see the clocks by hitting the stealth button, make changes, and save................but none of the changes apply or when they loaded they can't be applied. Hitting "apply" doesn't do a dam thing.
Right now the only way to make/apply changes is putting them in the .bat that Claymore uses. It is rather annoying.
hello, i know what you are talking about Trixx does not load the settings for a group of cards all together you need to save them 1 by one in the same profile lets say profile 1. Then when you want to load the setup you go to settings select the card press profile 1 and load then aplly. Go back to settings select te next card, press the profile 1 again and load and aplly and do this for all the others. Trixx Save the definitions of each graphic card in the same profile but cannot load them simultaneous.
