AMD Rebrand - RX570 / RX580 - Official Thread - page 24.

RobertD

newbie

Activity: 42

Merit: 0

Quote from: Mattthev on May 31, 2017, 05:36:09 AM

Quote from: RobertD on May 31, 2017, 04:59:51 AM

Quote from: freak1 on May 30, 2017, 04:19:30 AM

I have the SAPPHIRE PULSE RX 580 8GB HYNIX.

I modded the bios copying the 0:1750 string to 0:2000 and 0:2250, this gives me 25,5 m/h, and 27 with core at 1100 mem at 2150 and vcore at -96 and powerlimit at +30. i found this http://1stminingrig.com/best-bios-rom-for-sapphire-pulse-rx-580-8gb-oc-hynix-memory-30-mhs/ but my firmware is 256kb and has different timings, mine does not have 1:x og 2:x so i can't use it. Any suggestions to getting this to 30m/h?

These cards are strange. I've tried using 1500 straps and running them at 1250/1800 for 25.5mhs. The 1750 strap allow the mem to clocked at 2050+ but still give only 25.5mhs.
I've also tried playing with the powertune settings in the bios, rasing tdp/tdc/max powerlimit/small powerlimit with no effect on hashrate.

It's all about timings... those basic copies straps aren't fastest.

The funny thing is that my MSI 470 Gaming X and Sapphire 470 Nitro+ with Hynix can mine at 29-30mhs, but the same strap on the Sapphire 580 8g pulse only run do 25.5mhs, even at the same clock speed 1250/2050.

mshordja

member

Activity: 146

Merit: 10

Quote from: Mattthev on May 31, 2017, 05:36:09 AM

Quote from: RobertD on May 31, 2017, 04:59:51 AM

Quote from: freak1 on May 30, 2017, 04:19:30 AM

I have the SAPPHIRE PULSE RX 580 8GB HYNIX.

I modded the bios copying the 0:1750 string to 0:2000 and 0:2250, this gives me 25,5 m/h, and 27 with core at 1100 mem at 2150 and vcore at -96 and powerlimit at +30. i found this http://1stminingrig.com/best-bios-rom-for-sapphire-pulse-rx-580-8gb-oc-hynix-memory-30-mhs/ but my firmware is 256kb and has different timings, mine does not have 1:x og 2:x so i can't use it. Any suggestions to getting this to 30m/h?

These cards are strange. I've tried using 1500 straps and running them at 1250/1800 for 25.5mhs. The 1750 strap allow the mem to clocked at 2050+ but still give only 25.5mhs.
I've also tried playing with the powertune settings in the bios, rasing tdp/tdc/max powerlimit/small powerlimit with no effect on hashrate.

It's all about timings... those basic copies straps aren't fastest.

Quote from: mshordja on May 31, 2017, 04:55:05 AM

need one advice better to get Sapphire RX570 Nitro+ 4GB or RX580 Nitro+ 4GB?
Both 4GB versions, the first one is 280Euros the second is 316 Euros. Who has this cards can give me an advise ?
Thanks

What are you mining? It still all depends on memory brand mostly... I prefer Samsung but you can't say which one use it.

i don't know what memory they will have, the rig with be build for ETH mining

batko

full member

Activity: 169

Merit: 100

Quote from: ?? on ??

Quote from: batko on May 30, 2017, 05:39:21 AM

I have Rx 580 8GB Pulse hynix with costum strap i have 32mhs
1225/2250 0.83v

What's the part number of your cards? How big is bios 256kb or 512kb?

256KB

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: RobertD on May 31, 2017, 04:59:51 AM

Quote from: freak1 on May 30, 2017, 04:19:30 AM

I have the SAPPHIRE PULSE RX 580 8GB HYNIX.

I modded the bios copying the 0:1750 string to 0:2000 and 0:2250, this gives me 25,5 m/h, and 27 with core at 1100 mem at 2150 and vcore at -96 and powerlimit at +30. i found this http://1stminingrig.com/best-bios-rom-for-sapphire-pulse-rx-580-8gb-oc-hynix-memory-30-mhs/ but my firmware is 256kb and has different timings, mine does not have 1:x og 2:x so i can't use it. Any suggestions to getting this to 30m/h?

These cards are strange. I've tried using 1500 straps and running them at 1250/1800 for 25.5mhs. The 1750 strap allow the mem to clocked at 2050+ but still give only 25.5mhs.
I've also tried playing with the powertune settings in the bios, rasing tdp/tdc/max powerlimit/small powerlimit with no effect on hashrate.

It's all about timings... those basic copies straps aren't fastest.

Quote from: mshordja on May 31, 2017, 04:55:05 AM

need one advice better to get Sapphire RX570 Nitro+ 4GB or RX580 Nitro+ 4GB?
Both 4GB versions, the first one is 280Euros the second is 316 Euros. Who has this cards can give me an advise ?
Thanks

What are you mining? It still all depends on memory brand mostly... I prefer Samsung but you can't say which one use it.

RobertD

newbie

Activity: 42

Merit: 0

Quote from: freak1 on May 30, 2017, 04:19:30 AM

I have the SAPPHIRE PULSE RX 580 8GB HYNIX.

I modded the bios copying the 0:1750 string to 0:2000 and 0:2250, this gives me 25,5 m/h, and 27 with core at 1100 mem at 2150 and vcore at -96 and powerlimit at +30. i found this http://1stminingrig.com/best-bios-rom-for-sapphire-pulse-rx-580-8gb-oc-hynix-memory-30-mhs/ but my firmware is 256kb and has different timings, mine does not have 1:x og 2:x so i can't use it. Any suggestions to getting this to 30m/h?

These cards are strange. I've tried using 1500 straps and running them at 1250/1800 for 25.5mhs. The 1750 strap allow the mem to clocked at 2050+ but still give only 25.5mhs.
I've also tried playing with the powertune settings in the bios, rasing tdp/tdc/max powerlimit/small powerlimit with no effect on hashrate.

Quote from: batko on May 30, 2017, 05:39:21 AM

I have Rx 580 8GB Pulse hynix with costum strap i have 32mhs
1225/2250 0.83v

What's the part number of your cards? How big is bios 256kb or 512kb?

mshordja

member

Activity: 146

Merit: 10

need one advice better to get Sapphire RX570 Nitro+ 4GB or RX580 Nitro+ 4GB?
Both 4GB versions, the first one is 280Euros the second is 316 Euros. Who has this cards can give me an advise ?
Thanks

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: M1n0r on May 31, 2017, 01:27:48 AM

Looks good but what about error and power consumption ?
Ah yes and do you try dual mining ?
I have 4 Nitro LE 8GB Hynix but only 1 can reach 30mhs eth 900Mhs Dcr at 1200/2130 -138mv 124-9 Watt.
3 Other are like 1200/ Ram 2117/2095/2085 at 29+eth 880 dcr 2 are at -144mv.
All with no error.
I use some strap that some one send in this thread.
What strap are you using ?

Now I buy a Asus 580 strixx OC 8GB that come with samsung ram.
I copy the Ubermix last straps to 1750 and 2000 but I must downclock ram at 1980 to get no error and get only 27mhs.
I try the lower version of Ubermix but when I start mine at 2000mhz mem and got only 27mhs push it to 2010 and the error start.
I am dissapointed about the ubermix strap.
Some one have better strap ?

You have bad luck for memory... If you can't run Uber-mix 3.1 you will never have best performance... Use 3.2, but it's a lot lower hs but stable.

Quote from: Candsno8 on May 31, 2017, 01:53:21 AM

I'm looking for a recommendation on which card to purchase:

Sapphire Pulse RX 570 4GB
Asus Strix RX 570 4GB
Asus Dual RX 480 4GB

The prices for these cards are all the same, but I could get the Strix soonest. I will be primarily mining ethash, likely dual mining.

Thanks.

Edit: corrected 470 to 570, as these are my current options.

I have Asus Strix 470, best fans I've ever seen, but no memory heasink so far no problem. Asus Dual 480 is bad, it has Samsung memory, but 8G version is good, but have same performance as Strix 470 with Samsung memory... and O8G was dissaster, I returned that card, it couldn't handle any overclock and also Uber-mix timings wasn't working milions of memory errors. This card have also bad cooling fans are noise and no memory heatsink... it have some errors on memory because of heat!

M1n0r

member

Activity: 87

Merit: 10

No I only buy 80 8GB model I think it is easy to sell it after.
And yes for the heat the summer is comming it go to 75°c at ~30°c ambient.
You can buy some card ROI it in like 2-3mounts Make some more mounts profit and resell the card if you whant.
And the card will always be waranty.
Then you can buy some vega or 1080Ti or juste stay with your card.

Candsno8

full member

Activity: 238

Merit: 100

Quote from: M1n0r on May 31, 2017, 02:42:32 AM

I had 2 rx480 NITRO + OC 8GB samsung.
I sell it becuse there was generating too much heat in dual mining comparse to the 580.
Rx480 was @75°c Rx580@65°c.
But there take little bite more power.

My current 480s aren't tuning that hot. Any experience with the 570s?

M1n0r

member

Activity: 87

Merit: 10

I had 2 rx480 NITRO + OC 8GB samsung.
I sell it becuse there was generating too much heat in dual mining comparse to the 580.
Rx480 was @75°c Rx580@65°c.
But there take little bite more power.

Candsno8

full member

Activity: 238

Merit: 100

Quote from: DragonETH on May 31, 2017, 01:55:56 AM

take 570 or 580 with 4GB or wait for the arrival of VEGA on June 5, and then sits down to think about what to build the mine in 2017

You prefer the 570 over the 480?

DragonETH

sr. member

Activity: 588

Merit: 250

https://www.projecton.pro/

take 570 or 580 with 4GB or wait for the arrival of VEGA on June 5, and then sits down to think about what to build the mine in 2017

Candsno8

full member

Activity: 238

Merit: 100

I'm looking for a recommendation on which card to purchase:

Sapphire Pulse RX 570 4GB
Asus Strix RX 570 4GB
Asus Dual RX 480 4GB

The prices for these cards are all the same, but I could get the Strix soonest. I will be primarily mining ethash, likely dual mining.

Thanks.

Edit: corrected 470 to 570, as these are my current options.

M1n0r

member

Activity: 87

Merit: 10

Quote from: batko on May 30, 2017, 05:39:21 AM

I have Rx 580 8GB Pulse hynix with costum strap i have 32mhs
1225/2250 0.83v

Looks good but what about error and power consumption ?
Ah yes and do you try dual mining ?
I have 4 Nitro LE 8GB Hynix but only 1 can reach 30mhs eth 900Mhs Dcr at 1200/2130 -138mv 124-9 Watt.
3 Other are like 1200/ Ram 2117/2095/2085 at 29+eth 880 dcr 2 are at -144mv.
All with no error.
I use some strap that some one send in this thread.
What strap are you using ?

Now I buy a Asus 580 strixx OC 8GB that come with samsung ram.
I copy the Ubermix last straps to 1750 and 2000 but I must downclock ram at 1980 to get no error and get only 27mhs.
I try the lower version of Ubermix but when I start mine at 2000mhz mem and got only 27mhs push it to 2010 and the error start.
I am dissapointed about the ubermix strap.
Some one have better strap ?

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: Apolyon on May 30, 2017, 05:12:27 PM

Hello guys, any of you tested MSI RX 580 Armor 8G OC HYNIX ? I can't do more than 27 MH/s with straps 2:1750 and OC 1150 / 2150.

Did all straps like 2:1500 - 2:2000 = crashing after Windows booted up.
2:1625 = with stock setting crash after miner starts work.

1:1500, 1:1625, 1:1750 = no effects at all.

Any ideas? Or I'm doing something wrong? Sad

Original bios here: https://www.dropbox.com/s/7jljf2bl8q3g7d2/original_hynix_rx580_.rom?dl=0

Or this is gabage gpu and mems? I could return them and try with something else. What you think?

You need better timings.

Apolyon

newbie

Activity: 14

Merit: 0

Hello guys, any of you tested MSI RX 580 Armor 8G OC HYNIX ? I can't do more than 27 MH/s with straps 2:1750 and OC 1150 / 2150.

Did all straps like 2:1500 - 2:2000 = crashing after Windows booted up.
2:1625 = with stock setting crash after miner starts work.

1:1500, 1:1625, 1:1750 = no effects at all.

Any ideas? Or I'm doing something wrong? Sad

Original bios here: https://www.dropbox.com/s/7jljf2bl8q3g7d2/original_hynix_rx580_.rom?dl=0

Or this is gabage gpu and mems? I could return them and try with something else. What you think?

spyshagg

full member

Activity: 176

Merit: 100

Quote from: spelunker on May 30, 2017, 11:55:30 AM

How could I now undervolt or increase the hashrate on my RX580 (Samsung Memory)? It is going at ~27.5MH/s. Any pointers where I can read about it?

You can either use Msi afterburner or any other gpu software. If you use Claymore Miner, you can use the -cvdcc option to set the voltage. -cvdcc 900 = 0.9v etc

spelunker

newbie

Activity: 14

Merit: 0

How could I now undervolt or increase the hashrate on my RX580 (Samsung Memory)? It is going at ~27.5MH/s. Any pointers where I can read about it?

Managalar

newbie

Activity: 4

Merit: 0

Quote from: ?? on ??

Quote from: Managalar on May 28, 2017, 12:36:14 AM

Quote from: nateminer723 on May 22, 2017, 11:40:03 PM

Help! Hey Guys... A bit of a noob here, so greatly appreciate any help.

Setting up my 2nd and 3rd rig and decided to go with the RX580... Ended up with XFX RX580 8GB GTS Black Edition

Info on card:
http://xfxforce.com/en-us/products/amd-radeon-rx-500-series/rx-580-gts-8gb-dd-rx-580p8dbd6

I was only getting 18-19 hash rate out of the box... I can't get it past 20! From what I've read the 580's should be in the high 20's at least.

This was the best I could do... In ethOS I've updated the config...
Core: I've maxed out (according to specs) at 1425.
Memory: 2220

Is there anything else I should try?? Hoping to not have to return 10 GPUs...

You're supposed to underclock the GPU and tweak the memory timings with BIOS edits.

I picked up one of those XFX RX 580s as well, but it has two different types of memory. 4GB of type 1 Samsung and 4GB of type 2 Hynix (I posted a pic from the bios editor below).
https://m.imgur.com/gallery/y74j1

So far I haven't tried to use the same straps across both types of memory...I have tried copying the 1500 from type 1 (Samsung) to only type 1, and the 1500 of type 2 to only the 2 (Hynix). I reflashed the BIOS for 1625 as well, but it was still unstable. I did several attempts with the 1625 Straps where I underclocked the GPU in Wattman but it didn't seem to help.

Does anyone think I should try to use the same timings "straps" for both the Samsung and Hynix? It seems really odd/tricky to me to have 2 different types of memory to overclock independently.

If you like softbricking them, sure, go ahead! Cheesy

I'm not 100% sure my card has two types of memory. If it only has Hynix it will not matter what straps I plug in for Samsung memory. As far as bricking it, I'm only adjusting memory timings. There's surely going to be some timings that would work better than the defaults for ETH mining.

freak1

newbie

Activity: 47

Merit: 0

Quote from: batko on May 30, 2017, 05:39:21 AM

I have Rx 580 8GB Pulse hynix with costum strap i have 32mhs
1225/2250 0.83v

I would love to be getting those speeds. Can i have a copy of the firmware or can you tell me what you changed?

Topic: AMD Rebrand - RX570 / RX580 - Official Thread - page 24. (Read 173429 times)