So, I have used the BIOS provided and I verified in GPU-Z that the memory is DDR5 (SAMSUNG) on all cards. Bad news. Somehow it is STILL hashing only at 17MH/s now! Even if I restore to original BIOS which was actually exported from ATI Flash and not GPU-Z. Now, what doesn't make sense is how come it does not return to the original hash rate even though I flashed to the original BIOS. Additionally, I did update to EthOS 1.2.2 from 1.2.1 and everything went smooth. Does modifying BIOS in Windows also require special configuration in EthOS (I assume so and I do have global mem set to 1250 and just set globalcore to 2000).
I am completely lost as to what is going on. I do have 3 more identical cards sealed in the box which I am going to open, benchmark to check if they get to 24MH/s and extract the BIOS to hopefully restore to 24 and not lose money by being down.
All help is much appreciated if you can solve this for me, I would love to send you a donation.
Topic: AMD Rebrand - RX570 / RX580 - Official Thread - page 26. (Read 173461 times)
Matthev thanks a lot for help, it works. Great. Thumbs up.
Last question - this ubermix strap works only for RX 480/580 and Samsung RAM or it is possible to use it on RX 470/570 and Hynix etc.?
Thanks a lot again...
It's made for Samsung memory only. You need different timings for every manufacture (Hynix,Elpida,Micron,Samsung). No matter if it's RX 480, 570 and 4 or 8GB. You can google them or made your own, all important what use to decode and encode is in the thread i've posted here like 10 times. Or PM me I can give you timings I'm using right now (I need tester for Hynix anyway I don't have any Hynix card but in future maybe so I need to test what timings are good.)Last question - this ubermix strap works only for RX 480/580 and Samsung RAM or it is possible to use it on RX 470/570 and Hynix etc.?
Thanks a lot again...
Decoding info I saw, but dont understand it, dont know what these values mean.
So ubermix will work also on RX 470 4GB with Samsung memory?
I have also 470s with Hynix and Micron, if you want to test it, let me know...
Here are the original and modded BIOS roms based on the instructions. Both are for my set of GIGABYTE Aorus Radeon RX580 XTR 8G. However, no matter what I have tried, Windows 7 hangs as soon as the "Your VBIOS has been imported successfully" message and I have to hard reboot. Cards were definitely updated because as soon as I boot into EthOS, I get dready super high speed fans....and 17MH/S. Begging for help because these cards are just collecting dust instead of mining.
Thank you so much!
https://drive.google.com/drive/folders/0B1WcnHjlDkk4SXBuTXpDcFIwdE0?usp=sharing
Memory is Samsung? It should be cause vendor is 0x21, but you better check it!Thank you so much!
https://drive.google.com/drive/folders/0B1WcnHjlDkk4SXBuTXpDcFIwdE0?usp=sharing
I've insert Uber-Mix 3.1 to 2000Mhz so you need 2000 and more to be running. Check for mem errors.
I don't have RX 5xx or even Gigabyte cards, so I can't really tell what you need more, TDP and clocks are set very high for stock... so I didn't change it, should be fine.
BTW did you use GPU-Z for backup? RX 4xx bios have 256KB, but yours have 512KB? I think it's not right. Use ATI flash for backup.
https://mega.nz/#!UiQETCLY!ZyIufYF4GALlWLyhjRGgr1denEG2NYTfRPjDBOV-mM4
Matthew, wow thank you so much buddy!!!! Let me try this now and report back.
Matthev thanks a lot for help, it works. Great. Thumbs up.
Last question - this ubermix strap works only for RX 480/580 and Samsung RAM or it is possible to use it on RX 470/570 and Hynix etc.?
Thanks a lot again...
It's made for Samsung memory only. You need different timings for every manufacture (Hynix,Elpida,Micron,Samsung). No matter if it's RX 480, 570 and 4 or 8GB. You can google them or made your own, all important what use to decode and encode is in the thread i've posted here like 10 times. Or PM me I can give you timings I'm using right now (I need tester for Hynix anyway I don't have any Hynix card but in future maybe so I need to test what timings are good.) Last question - this ubermix strap works only for RX 480/580 and Samsung RAM or it is possible to use it on RX 470/570 and Hynix etc.?
Thanks a lot again...
Here are the original and modded BIOS roms based on the instructions. Both are for my set of GIGABYTE Aorus Radeon RX580 XTR 8G. However, no matter what I have tried, Windows 7 hangs as soon as the "Your VBIOS has been imported successfully" message and I have to hard reboot. Cards were definitely updated because as soon as I boot into EthOS, I get dready super high speed fans....and 17MH/S. Begging for help because these cards are just collecting dust instead of mining.
Thank you so much!
https://drive.google.com/drive/folders/0B1WcnHjlDkk4SXBuTXpDcFIwdE0?usp=sharing
Memory is Samsung? It should be cause vendor is 0x21, but you better check it!Thank you so much!
https://drive.google.com/drive/folders/0B1WcnHjlDkk4SXBuTXpDcFIwdE0?usp=sharing
I've insert Uber-Mix 3.1 to 2000Mhz so you need 2000 and more to be running. Check for mem errors.
I don't have RX 5xx or even Gigabyte cards, so I can't really tell what you need more, TDP and clocks are set very high for stock... so I didn't change it, should be fine.
BTW did you use GPU-Z for backup? RX 4xx bios have 256KB, but yours have 512KB? I think it's not right. Use ATI flash for backup.
https://mega.nz/#!UiQETCLY!ZyIufYF4GALlWLyhjRGgr1denEG2NYTfRPjDBOV-mM4
Matthew, wow thank you so much buddy!!!! Let me try this now and report back.
On that first post there is nothing about UberMix. So where is some info about it and how to use it? I have read all pages of that thread but no one was able to give me right info. It looks like ubermix is just for some choosen ones...
OMG 
guysIf you read all the thread there is a lot off version of Uber-Mix. But I recommend 3.1. First post -> performance timings -> Uber-Mix 3.1. There is also 3.2 somewhere in the end of the thread if your GPU can't handle it...
I have RX 470 Asus Strix with Samsung and Elpida and I have 818H/s with Elpida and 800 with Samsung on Monero. But I bet this one is the best for Samsung, but you could use google and find another there are plenty of them. In that thread first post is also tool to decode that straps and make your own timings
BTW all these timings is very hard to set, it tooks hours and hours for maker and testers, so you should be more thankful that they spread it to public...
Matthev thanks a lot for help, it works. Great. Thumbs up.
Last question - this ubermix strap works only for RX 480/580 and Samsung RAM or it is possible to use it on RX 470/570 and Hynix etc.?
Thanks a lot again...
Here are the original and modded BIOS roms based on the instructions. Both are for my set of GIGABYTE Aorus Radeon RX580 XTR 8G. However, no matter what I have tried, Windows 7 hangs as soon as the "Your VBIOS has been imported successfully" message and I have to hard reboot. Cards were definitely updated because as soon as I boot into EthOS, I get dready super high speed fans....and 17MH/S. Begging for help because these cards are just collecting dust instead of mining.
Thank you so much!
https://drive.google.com/drive/folders/0B1WcnHjlDkk4SXBuTXpDcFIwdE0?usp=sharing
Memory is Samsung? It should be cause vendor is 0x21, but you better check it!Thank you so much!
https://drive.google.com/drive/folders/0B1WcnHjlDkk4SXBuTXpDcFIwdE0?usp=sharing
I've insert Uber-Mix 3.1 to 2000Mhz so you need 2000 and more to be running. Check for mem errors.
I don't have RX 5xx or even Gigabyte cards, so I can't really tell what you need more, TDP and clocks are set very high for stock... so I didn't change it, should be fine.
BTW did you use GPU-Z for backup? RX 4xx bios have 256KB, but yours have 512KB? I think it's not right. Use ATI flash for backup.
https://mega.nz/#!UiQETCLY!ZyIufYF4GALlWLyhjRGgr1denEG2NYTfRPjDBOV-mM4
Yes, it can! I thank that I made a bios for you with lower power consumption. I made my Hynix 30MH ETH, 570MH SC on 90W.
90W full card? thats impressive! I will try it
Do you disable ROPS also? I think Stilt's bios had ROPS disabled for extra power saving
Here are the original and modded BIOS roms based on the instructions. Both are for my set of GIGABYTE Aorus Radeon RX580 XTR 8G. However, no matter what I have tried, Windows 7 hangs as soon as the "Your VBIOS has been imported successfully" message and I have to hard reboot. Cards were definitely updated because as soon as I boot into EthOS, I get dready super high speed fans....and 17MH/S. Begging for help because these cards are just collecting dust instead of mining.
Thank you so much!
https://drive.google.com/drive/folders/0B1WcnHjlDkk4SXBuTXpDcFIwdE0?usp=sharing
Thank you so much!
https://drive.google.com/drive/folders/0B1WcnHjlDkk4SXBuTXpDcFIwdE0?usp=sharing
Could elaborate please? Noob here. I know how to backup and flash via ATI Flash/Polaris Editor but don't know Ubermix.
So you know the basics, use backuped bios in Polaris and cope Uber-Mix timmings in 1750 and 2000.http://www.overclock.net/t/1604567/polaris-bios-editing-rx5xx-rx4xx
Go here -> first post -> performance timings -> uber-mix 3.1
If you get lot of memory error try lower clocks it should go somewhere to 2100MHz but there is almost no difference between 2000MHz and 2100MHz with this timing...
If it didn't work you need not so agressive timings. In that thread is Uber-Mix 3.2 you have to find it.
On that first post there is nothing about UberMix. So where is some info about it and how to use it? I have read all pages of that thread but no one was able to give me right info. It looks like ubermix is just for some choosen ones...
OMG guysIf you read all the thread there is a lot off version of Uber-Mix. But I recommend 3.1. First post -> performance timings -> Uber-Mix 3.1. There is also 3.2 somewhere in the end of the thread if your GPU can't handle it...
I have RX 470 Asus Strix with Samsung and Elpida and I have 818H/s with Elpida and 800 with Samsung on Monero. But I bet this one is the best for Samsung, but you could use google and find another there are plenty of them. In that thread first post is also tool to decode that straps and make your own timings
BTW all these timings is very hard to set, it tooks hours and hours for maker and testers, so you should be more thankful that they spread it to public...
Does anyone know how I can get Gigabyte Radeon RX580 Aorus (Samsung memory) to hash at 28+
Mine was going at 24MH/s on EthOS, I flashed it in Windows and now my 6 cards only go at 17MH/s per card.
Is it possible and how?
Thank you!
1st post performance timings UberMix 3.1Mine was going at 24MH/s on EthOS, I flashed it in Windows and now my 6 cards only go at 17MH/s per card.
Is it possible and how?
Thank you!
http://www.overclock.net/t/1604567/polaris-bios-editing-rx5xx-rx4xx
On that first post there is nothing about UberMix. So where is some info about it and how to use it? I have read all pages of that thread but no one was able to give me right info. It looks like ubermix is just for some choosen ones...
112W are too high for 30mh. You can optimize it more.
How? minimum voltage I can set in claymore is 900mv (0.88v) and I get 105watts (full card) for 27Mh/s on your bios. Can it go lower in bios mods?
Does anyone know how I can get Gigabyte Radeon RX580 Aorus (Samsung memory) to hash at 28+
Mine was going at 24MH/s on EthOS, I flashed it in Windows and now my 6 cards only go at 17MH/s per card.
Is it possible and how?
Thank you!
1st post performance timings UberMix 3.1Mine was going at 24MH/s on EthOS, I flashed it in Windows and now my 6 cards only go at 17MH/s per card.
Is it possible and how?
Thank you!
http://www.overclock.net/t/1604567/polaris-bios-editing-rx5xx-rx4xx
Could elaborate please? Noob here. I know how to backup and flash via ATI Flash/Polaris Editor but don't know Ubermix.
I am using the performance timings Uber Mix 3.1 for Gigabyte Radeon Aeros RX580 8GB. I made a BIOS backup, then used the value stated: 777000000000000022CC1C00AD615C41C0590E152ECC8608006007000B031420FA8900A00300000 010122F3FBA354019 on the 2000 timing, yet now all my cards hash at ~17MH/s (stock was 24MH/s). Also, when I use ATI Flash and Program the BIOS, the machine says VBIOS updated successfully, but the machine hangs. I am also just trying to restore the original BIOS at this point to return to 24MH/s with no luck. Please advice
Thank you!
Give me your original BIOS. I will try to optimise it.
Does anyone know how I can get Gigabyte Radeon RX580 Aorus (Samsung memory) to hash at 28+
Mine was going at 24MH/s on EthOS, I flashed it in Windows and now my 6 cards only go at 17MH/s per card.
Is it possible and how?
Thank you!
1st post performance timings UberMix 3.1Mine was going at 24MH/s on EthOS, I flashed it in Windows and now my 6 cards only go at 17MH/s per card.
Is it possible and how?
Thank you!
http://www.overclock.net/t/1604567/polaris-bios-editing-rx5xx-rx4xx
Could elaborate please? Noob here. I know how to backup and flash via ATI Flash/Polaris Editor but don't know Ubermix.
I am using the performance timings Uber Mix 3.1 for Gigabyte Radeon Aeros RX580 8GB. I made a BIOS backup, then used the value stated: 777000000000000022CC1C00AD615C41C0590E152ECC8608006007000B031420FA8900A00300000 010122F3FBA354019 on the 2000 timing, yet now all my cards hash at ~17MH/s (stock was 24MH/s). Also, when I use ATI Flash and Program the BIOS, the machine says VBIOS updated successfully, but the machine hangs. I am also just trying to restore the original BIOS at this point to return to 24MH/s with no luck. Please advice
Thank you!
112W are too high for 30mh. You can optimize it more.
How? minimum voltage I can set in claymore is 900mv (0.88v) and I get 105watts (full card) for 27Mh/s on your bios. Can it go lower in bios mods?
Does anyone know how I can get Gigabyte Radeon RX580 Aorus (Samsung memory) to hash at 28+
Mine was going at 24MH/s on EthOS, I flashed it in Windows and now my 6 cards only go at 17MH/s per card.
Is it possible and how?
Thank you!
1st post performance timings UberMix 3.1Mine was going at 24MH/s on EthOS, I flashed it in Windows and now my 6 cards only go at 17MH/s per card.
Is it possible and how?
Thank you!
http://www.overclock.net/t/1604567/polaris-bios-editing-rx5xx-rx4xx
Could elaborate please? Noob here. I know how to backup and flash via ATI Flash/Polaris Editor but don't know Ubermix.
Does anyone know how I can get Gigabyte Radeon RX580 Aorus (Samsung memory) to hash at 28+
Mine was going at 24MH/s on EthOS, I flashed it in Windows and now my 6 cards only go at 17MH/s per card.
Is it possible and how?
Thank you!
1st post performance timings UberMix 3.1Mine was going at 24MH/s on EthOS, I flashed it in Windows and now my 6 cards only go at 17MH/s per card.
Is it possible and how?
Thank you!
http://www.overclock.net/t/1604567/polaris-bios-editing-rx5xx-rx4xx
any suggestions to take it down?
actually I've undervolt the GPU, overclock memory and set the fan to 40% for a stable 30mhs and 53°.
At the moment I'm testing it with only 1 rx580 on test machine.
actually I've undervolt the GPU, overclock memory and set the fan to 40% for a stable 30mhs and 53°.
At the moment I'm testing it with only 1 rx580 on test machine.
Does anyone know how I can get Gigabyte Radeon RX580 Aorus (Samsung memory) to hash at 28+
Mine was going at 24MH/s on EthOS, I flashed it in Windows and now my 6 cards only go at 17MH/s per card.
Is it possible and how?
Thank you!
Mine was going at 24MH/s on EthOS, I flashed it in Windows and now my 6 cards only go at 17MH/s per card.
Is it possible and how?
Thank you!
112W are too high for 30mh. You can optimize it more.
even with free energy?
Jump to: