[ANN] [1080 | 1080TI] ETHlargement - The Hashrate Hardener - page 16.

B00gieman

newbie

Activity: 65

Merit: 0

Quote from: OhGodAGirl on May 31, 2018, 07:16:55 PM

Quote from: B00gieman on May 26, 2018, 05:07:17 AM

Need to buy new hardware?

Mmmmm... No Thanks.
It was not what i was expecting. Thought more for a devfee.

I never said that. Wink

I think for beginners the service is well thought.
But...as i Said... You can say No...but the true is i need to buy hardware.
Once again. Thanks for the ETH pill.

jaymillerSR

newbie

Activity: 3

Merit: 0

I am curious if it's safe to leave ETHlargement on while using Nicehash with all the coin switching. Lately I have found it more profitable to put my rigs on Nicehash again. My 8xMSI 1080 Gaming X rig is mostly hashing Lyra2Rev2, but it seems my other rigs (8x1070s, 8x1070tis, and 8x1060s) are mining CryptonightV7 for decent profits occasionally. So basically, is it okay for ETHlargement to be on full-time while mining LyraRev2, Equihash, NeoScrypt etc. on NiceHash waiting for ETH and CryptonightV7 spikes?

NimaV

newbie

Activity: 31

Merit: 0

Quote from: keksik on June 07, 2018, 04:13:08 AM

hello, i have msi seahawk gtx1080, pill works and getting 30mhs after i run the file and claymore. however any slight overclock (+50mhz) in afterburner makes mining crash. any advise please_ without it im able to overclock to +500 withut any issue. i understand it makes timings more agresive, however +50 crashes pc? Huh

same problem here. with 1080ti I can add +550 MHz to memory without any issue but if I add even 5 MHz to any of 1080s, my PC crashes instantly! I guess it's becuse ETHlargement pill is currently more optimized for 1080ti not 1080.

jmigdlc99

sr. member

Activity: 784

Merit: 282

Quote from: keksik on June 07, 2018, 04:13:08 AM

hello, i have msi seahawk gtx1080, pill works and getting 30mhs after i run the file and claymore. however any slight overclock (+50mhz) in afterburner makes mining crash. any advise please_ without it im able to overclock to +500 withut any issue. i understand it makes timings more agresive, however +50 crashes pc? Huh

Please anyone feel free to correct me, but as far as i remember, you have to close all your overclock tools first (MSI afterburner, nvidia-smi, etc) then run the pill first and then run your mining software second. After those are both running smoothly, thats when you open your overclock tools and apply settings. The settings won't be the same as your max overclock settings before the pill tho. It will be slightly less so just play around with the values.

keksik

jr. member

Activity: 169

Merit: 1

hello, i have msi seahawk gtx1080, pill works and getting 30mhs after i run the file and claymore. however any slight overclock (+50mhz) in afterburner makes mining crash. any advise please_ without it im able to overclock to +500 withut any issue. i understand it makes timings more agresive, however +50 crashes pc? Huh

hairysun

newbie

Activity: 15

Merit: 1

Quote from: NimaV on June 05, 2018, 10:02:10 PM

Quote from: hairysun on June 04, 2018, 08:12:49 PM

Having problems here .....5x8x1080TIs (EVGA SC2), five identical rigs on Windows 10. (65,-100,650) They run great for 7-10 hours at 50MHz +/- and then the rigs disconnect from ethermine and cannot reconnect until everything is shut down and restarted. Has anyone else run into this? Using ethminer-0.15.0.dev4.

Currently lowering clocks to no avail as of yet. It's driving me nuts.

Use 391.35 driver with Bminer. best driver and miner for me. 397 and newer drivers were unstable for me, my problem solved after I rolled back to 391.35.

I gave Claymore Miner a go and it seems to be working out a bit better ..... so far. If I get some more crashes in 10 or so hours I'll give the 391 drivers a shot and maybe Bminer.

Regardless, thanks for the input.

EDIT: The newest Claymore miner and 397 Nvidia drivers was the ticket for my rigs. Going on a couple days with no down time. Gonna work on over/under clocks to see if I can get a bit more out of the GPUs. I would like to take this opportunity to thank "Oh God a Company/Girl" for this exceptional level mining tool. Looking forward to whatever else they bring to the table in the future.

RivAngE

full member

Activity: 728

Merit: 169

What doesn't kill you, makes you stronger

+18% (from 880 to 1030 h/s) in Cryptonight with EVGA 1080ti FTW3.
I'm using the XMR-Stak miner from fireice-uk, not sure if I'm doing well miner-wise! I'm not mining Cryptonight that much and I haven't try other miners, I only mine this algo when I find an opportunity with a drop in diff since I'm a long term holder.

NimaV

newbie

Activity: 31

Merit: 0

Quote from: hairysun on June 04, 2018, 08:12:49 PM

Having problems here .....5x8x1080TIs (EVGA SC2), five identical rigs on Windows 10. (65,-100,650) They run great for 7-10 hours at 50MHz +/- and then the rigs disconnect from ethermine and cannot reconnect until everything is shut down and restarted. Has anyone else run into this? Using ethminer-0.15.0.dev4.

Currently lowering clocks to no avail as of yet. It's driving me nuts.

Use 391.35 driver with Bminer. best driver and miner for me. 397 and newer drivers were unstable for me, my problem solved after I rolled back to 391.35.

hairysun

newbie

Activity: 15

Merit: 1

Having problems here .....5x8x1080TIs (EVGA SC2), five identical rigs on Windows 10. (65,-100,650) They run great for 7-10 hours at 50MHz +/- and then the rigs disconnect from ethermine and cannot reconnect until everything is shut down and restarted. Has anyone else run into this? Using ethminer-0.15.0.dev4.

Currently lowering clocks to no avail as of yet. It's driving me nuts.

xpulse

newbie

Activity: 141

Merit: 0

Quote from: cryptoyes on June 02, 2018, 07:40:55 PM

Anyone else has an ASUS 1080Ti Turbo which doesn't respond to the pill even when using --revA? I'm getting 37 MH/s on it with or without the pill. My other 1080Ti's (MSI and Gigabyte) respond well to the pill.

Code:

# cat /proc/driver/nvidia/gpus/0000\:06\:00.0/information
Model: GeForce GTX 1080 Ti
IRQ: 135
GPU UUID: GPU-3058f196-7b94-8331-3e70-2f758dfefa18
Video BIOS: 86.02.39.00.22
Bus Type: PCIe
DMA Size: 47 bits
DMA Mask: 0x7fffffffffff
Bus Location: 0000:06:00.0
Device Minor: 3

Code:

./OhGodAnETHlargementPill-r2 --revA 3

This card weird, try to use memclock -400 or -450, yes negative !!!

cryptoyes

member

Activity: 297

Merit: 10

Anyone else has an ASUS 1080Ti Turbo which doesn't respond to the pill even when using --revA? I'm getting 37 MH/s on it with or without the pill. My other 1080Ti's (MSI and Gigabyte) respond well to the pill.

Code:

# cat /proc/driver/nvidia/gpus/0000\:06\:00.0/information
Model: GeForce GTX 1080 Ti
IRQ: 135
GPU UUID: GPU-3058f196-7b94-8331-3e70-2f758dfefa18
Video BIOS: 86.02.39.00.22
Bus Type: PCIe
DMA Size: 47 bits
DMA Mask: 0x7fffffffffff
Bus Location: 0000:06:00.0
Device Minor: 3

Code:

./OhGodAnETHlargementPill-r2 --revA 3

B00gieman

newbie

Activity: 65

Merit: 0

Quote from: 64dimensions on June 01, 2018, 09:57:12 AM

I certainly hope that OGAC makes their uber GPU tech available to everyone for some sort of devfee.

Hope to see that.

OhGodaPill was for me, on mining bases, the best software released for months.
Hope to see more coming.

64dimensions

hero member

Activity: 578

Merit: 508

Quote from: Regulater on May 25, 2018, 07:02:39 PM

Quote from: Walrusbonzo on May 25, 2018, 06:56:55 PM

25th of May... We're waiting Grin

Its been announced on Discord already. https://mineority.io/

The 1080ti is one of the last great cards without publicly available bios mods. Some sort of devfee based 1080ti general enhancement package which would include bios mods from OhGodAGirl et al. should be welcomed.

Going forward for miners there are a some tough issues:

1) GPU vs ASIC vs FPGA

2) Open source vs closed. You are not going to get people's best efforts or the best talent if software mods are open source.

3) I have yet to see any kind of cloud mining make money for the customer. If you need the superhuman GPU software skills of OhGodACompany to produce uber 1080ti's to make GPU cloud mining profitable, then I think your biz model is flawed.

I certainly hope that OGAC makes their uber GPU tech available to everyone for some sort of devfee.

induktor

hero member

Activity: 710

Merit: 502

Hello
I got segfault almost all the time with driver crashes, some times, when i don't get segfault, it works perfectly for a long time, it always segfault at the beginning, not during mining.

Linux 14.04 LTS (64) 8GB RAM, 6x 1080 Strix from flash drive
Run enlargement pill with & and then the miner.
claymore 11.7

any ideas what could cause it? the strange thing is that, sometimes i manage to make it work and it never crashes until the next reboot.

I only have segfault if i run the enlargement pill and then claymore , if i run claymore alone works fine, and other miners also works ok.

i am not overclocking or anything, just set fan speeds.
thanks
indkt.
[EDIT]
It seems to work fine with claymore 9.8, will try other versions and post, i would like to hear from someone else with the same problem (1080 only, 1080Ti is a completely different beast)

NimaV

newbie

Activity: 31

Merit: 0

Quote from: Mashy81 on May 31, 2018, 09:20:47 PM

So badly wanna see what the version for hbm memory on vega's can do.
But I guess I never will because of these whinny bitches that got the free version for Gddr5x.

Who is whining? Everybody is happy about this amazing gift. there are some feedbacks and problem reports which is essential in enhancing the software. I think you are the only one who is bitching here.

Mashy81

jr. member

Activity: 225

Merit: 1

So badly wanna see what the version for hbm memory on vega's can do.
But I guess I never will because of these whinny bitches that got the free version for Gddr5x.

OhGodAGirl

full member

Activity: 199

Merit: 108

Look, I'm really not that interesting. Promise.

Quote from: B00gieman on May 26, 2018, 05:07:17 AM

Need to buy new hardware?

Mmmmm... No Thanks.
It was not what i was expecting. Thought more for a devfee.

I never said that. Wink

xinxilas

newbie

Activity: 15

Merit: 0

My two 1080 G1 Gaming Gigabyte have the same problem

While using my "stable" OC Profiles, with +700 mem clock
I have troubles to stop mining(for example to switching algo mining purposes), or change memory clock while mining, or simply closing miner, or closing ETHPill exe
Right after doing any of this examples, artifacts appears on screen, and than reboots..
(it doesnt happens if i dony use the Pill)

Is there any way to fix it?
Its very important to switching mining algos here, or ill be stuck to mine always Eth...
It would be perfect if i fix it

I'm able to fix that using less memory clock, but it drops all my hash-rates,

pallas

legendary