Topic: [ANN] Announcing Galaxycoin - GLX, the new PoW/PoS coin, no premine! - page 17. (Read 100424 times)
July 24, 2013, 01:11:46 AM
nice getting a proof of stake block...
July 23, 2013, 09:05:27 PM
Nice hope I'll get some stakes soon
July 23, 2013, 05:52:10 PM
great to hear that your issue resolved.
I start getting some 0.05 stake blocks, though not much, it's great to receive some dividend
I start getting some 0.05 stake blocks, though not much, it's great to receive some dividend
July 23, 2013, 05:48:32 PM
I am having a total nightmare with this coin. So I tried with the galaxycoin.conf file with the addnodes and that didn't work. So then I follow this advice...
...and when the new wallet opens it doesn't have my old address, so even if I let it sync, my coins aren't going to appear. So then I restore the galaxycoin appdata folder from my recycle bin and now I get this when I run the qt...
A fatal error occurred. Galaxycoin can no longer continue safely and will quit.
EXCEPTION: St13runtime_error
CDB() : can't open database file blkindex.dat, error 22
C:\Users\miner\Downloads\galaxycoin12\galaxycoin\galaxycoin-qt.exe in Runaway exception
I do have a copy of the old wallet.dat but that was made when the wallet wouldn't sync and had about 1500 coins in it. There are about another 2000 coins that I would have had from a pool but since the wallet wasn't syncing I never got them. Is there any way I can sort this out or is it all borked now?
Blockchain seems to be functional and my wallet syncs fine without adding a conf file or any nodes now. Just delete the galaxycoin folder in appdata if the sync fails and try again, 20 connections to the network.
...and when the new wallet opens it doesn't have my old address, so even if I let it sync, my coins aren't going to appear. So then I restore the galaxycoin appdata folder from my recycle bin and now I get this when I run the qt...
A fatal error occurred. Galaxycoin can no longer continue safely and will quit.
EXCEPTION: St13runtime_error
CDB() : can't open database file blkindex.dat, error 22
C:\Users\miner\Downloads\galaxycoin12\galaxycoin\galaxycoin-qt.exe in Runaway exception
I do have a copy of the old wallet.dat but that was made when the wallet wouldn't sync and had about 1500 coins in it. There are about another 2000 coins that I would have had from a pool but since the wallet wasn't syncing I never got them. Is there any way I can sort this out or is it all borked now?
weird... I did not have problem with the sync. You may want to clean up the config dir except the peers.dat, wallet.dat and galaxycoin.conf (don't delete the 3 files, especially don't delete the wallet). Then restart the qt client, it should sync fine.
I had once problem that it seems to stuck in the middle of the sync, then I did the above, everything is sync'd fine.
What I see is that for pow/pos coins, the sync seems slower compared to the pow only coins.
Nice one. Cheers guys. The combination of the above and the addnodes has now sorted it. Now back to mining some.
July 23, 2013, 04:03:18 PM
I am having a total nightmare with this coin. So I tried with the galaxycoin.conf file with the addnodes and that didn't work. So then I follow this advice...
...and when the new wallet opens it doesn't have my old address, so even if I let it sync, my coins aren't going to appear. So then I restore the galaxycoin appdata folder from my recycle bin and now I get this when I run the qt...
A fatal error occurred. Galaxycoin can no longer continue safely and will quit.
EXCEPTION: St13runtime_error
CDB() : can't open database file blkindex.dat, error 22
C:\Users\miner\Downloads\galaxycoin12\galaxycoin\galaxycoin-qt.exe in Runaway exception
I do have a copy of the old wallet.dat but that was made when the wallet wouldn't sync and had about 1500 coins in it. There are about another 2000 coins that I would have had from a pool but since the wallet wasn't syncing I never got them. Is there any way I can sort this out or is it all borked now?
Blockchain seems to be functional and my wallet syncs fine without adding a conf file or any nodes now. Just delete the galaxycoin folder in appdata if the sync fails and try again, 20 connections to the network.
...and when the new wallet opens it doesn't have my old address, so even if I let it sync, my coins aren't going to appear. So then I restore the galaxycoin appdata folder from my recycle bin and now I get this when I run the qt...
A fatal error occurred. Galaxycoin can no longer continue safely and will quit.
EXCEPTION: St13runtime_error
CDB() : can't open database file blkindex.dat, error 22
C:\Users\miner\Downloads\galaxycoin12\galaxycoin\galaxycoin-qt.exe in Runaway exception
I do have a copy of the old wallet.dat but that was made when the wallet wouldn't sync and had about 1500 coins in it. There are about another 2000 coins that I would have had from a pool but since the wallet wasn't syncing I never got them. Is there any way I can sort this out or is it all borked now?
weird... I did not have problem with the sync. You may want to clean up the config dir except the peers.dat, wallet.dat and galaxycoin.conf (don't delete the 3 files, especially don't delete the wallet). Then restart the qt client, it should sync fine.
I had once problem that it seems to stuck in the middle of the sync, then I did the above, everything is sync'd fine.
What I see is that for pow/pos coins, the sync seems slower compared to the pow only coins.
July 23, 2013, 03:56:29 PM
I am having a total nightmare with this coin. So I tried with the galaxycoin.conf file with the addnodes and that didn't work. So then I follow this advice...
...and when the new wallet opens it doesn't have my old address, so even if I let it sync, my coins aren't going to appear. So then I restore the galaxycoin appdata folder from my recycle bin and now I get this when I run the qt...
A fatal error occurred. Galaxycoin can no longer continue safely and will quit.
EXCEPTION: St13runtime_error
CDB() : can't open database file blkindex.dat, error 22
C:\Users\miner\Downloads\galaxycoin12\galaxycoin\galaxycoin-qt.exe in Runaway exception
I do have a copy of the old wallet.dat but that was made when the wallet wouldn't sync and had about 1500 coins in it. There are about another 2000 coins that I would have had from a pool but since the wallet wasn't syncing I never got them. Is there any way I can sort this out or is it all borked now?
Blockchain seems to be functional and my wallet syncs fine without adding a conf file or any nodes now. Just delete the galaxycoin folder in appdata if the sync fails and try again, 20 connections to the network.
...and when the new wallet opens it doesn't have my old address, so even if I let it sync, my coins aren't going to appear. So then I restore the galaxycoin appdata folder from my recycle bin and now I get this when I run the qt...
A fatal error occurred. Galaxycoin can no longer continue safely and will quit.
EXCEPTION: St13runtime_error
CDB() : can't open database file blkindex.dat, error 22
C:\Users\miner\Downloads\galaxycoin12\galaxycoin\galaxycoin-qt.exe in Runaway exception
I do have a copy of the old wallet.dat but that was made when the wallet wouldn't sync and had about 1500 coins in it. There are about another 2000 coins that I would have had from a pool but since the wallet wasn't syncing I never got them. Is there any way I can sort this out or is it all borked now?
July 23, 2013, 03:10:14 PM
enjoy the roller coaster
July 23, 2013, 01:07:39 PM
blockchain explorer is working fine now...
July 23, 2013, 10:49:03 AM
Blockchain seems to be functional and my wallet syncs fine without adding a conf file or any nodes now. Just delete the galaxycoin folder in appdata if the sync fails and try again, 20 connections to the network.
July 23, 2013, 05:32:47 AM
Blockchain explorer (http://glx.webboise.com:2790/chain/Galaxycoin) bad, often not available, shows not all transactions.
July 23, 2013, 02:02:16 AM
yes looks it's down...
July 22, 2013, 11:24:42 PM
blockexplorer is down? I can't access it...
July 22, 2013, 08:30:50 PM
please read the front page of this thread, it has a "getting started" section and "sample galaxycoin.conf" file. Follow the instruction there, and replace addnode lines with those above
July 22, 2013, 07:27:38 PM
add these line in your config files (named galaxycoin.conf in the config dir), and restart qt client:
addnode=85.24.209.199
addnode=70.98.114.229
addnode=77.41.56.129
addnode=99.6.253.61
addnode=128.69.22.145
addnode=46.4.74.197
you should be in sync
addnode=85.24.209.199
addnode=70.98.114.229
addnode=77.41.56.129
addnode=99.6.253.61
addnode=128.69.22.145
addnode=46.4.74.197
you should be in sync
Cheers but I must be doing this wrong. I just downloaded the galaxycoin12 zip, extracted and then ran the client from there. I dont have a galaxycoin.conf or a config dir. Just a bunch of dll files and the galaxycoind and galaxycoin-qt applications.
July 22, 2013, 05:52:10 PM
add these line in your config files (named galaxycoin.conf in the config dir), and restart qt client:
addnode=85.24.209.199
addnode=70.98.114.229
addnode=77.41.56.129
addnode=99.6.253.61
addnode=128.69.22.145
addnode=46.4.74.197
you should be in sync
addnode=85.24.209.199
addnode=70.98.114.229
addnode=77.41.56.129
addnode=99.6.253.61
addnode=128.69.22.145
addnode=46.4.74.197
you should be in sync
July 22, 2013, 05:43:45 PM
my wallet is not syncing, even with the addnodes. Does anyone have any ideas?
Thanks
what's the problem you see? I have no sync problem. Try addnode these IPs?Thanks
{
"addr" : "174.56.58.238:15521",
"services" : "00000001",
"lastsend" : 1374474553,
"lastrecv" : 1374474564,
"conntime" : 1374464029,
"version" : 60008,
"subver" : "/Satoshi:0.7.4/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 28359,
"banscore" : 0
},
{
"addr" : "70.98.114.229:15521",
"services" : "00000001",
"lastsend" : 1374474556,
"lastrecv" : 1374474565,
"conntime" : 1374464096,
"version" : 60008,
"subver" : "/Satoshi:0.7.4/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 28360,
"banscore" : 0
},
{
"addr" : "109.155.170.3:15521",
"services" : "00000001",
"lastsend" : 1374474555,
"lastrecv" : 1374474565,
"conntime" : 1374464141,
"version" : 60008,
"subver" : "/Satoshi:0.7.4/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 28360,
"banscore" : 0
},
{
"addr" : "70.79.24.157:15521",
"services" : "00000001",
"lastsend" : 1374474564,
"lastrecv" : 1374474565,
"conntime" : 1374464248,
"version" : 60008,
"subver" : "/Satoshi:0.7.4/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 28360,
"banscore" : 0
},
{
"addr" : "108.27.249.69:15521",
"services" : "00000001",
"lastsend" : 1374474548,
"lastrecv" : 1374474564,
"conntime" : 1374466172,
"version" : 60008,
"subver" : "/Satoshi:0.7.4/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 28382,
"banscore" : 0
},
{
"addr" : "85.24.209.199:15521",
"services" : "00000001",
"lastsend" : 1374474548,
"lastrecv" : 1374474565,
"conntime" : 1374473329,
"version" : 60008,
"subver" : "/Satoshi:0.7.4/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 28515,
"banscore" : 0
}
Mine's not syncing either. What do I need to do with those addnoes (sorry if a dumb question) ?
July 22, 2013, 05:36:21 PM
I don't mind if the great coins will be in an exchange 3 days earlier or 3 days later, key is to accumulate the great coins
July 22, 2013, 04:53:45 PM
any idea when this will hit an exchange?
that is a good question I am asking the same...Yes this needs to be added somewhere!
I agree. There are some great and heavily mined coins still not on the exchanges, this being one of them.
July 22, 2013, 03:57:07 PM
any idea when this will hit an exchange?
that is a good question I am asking the same...Yes this needs to be added somewhere!
July 22, 2013, 12:58:15 PM
any idea when this will hit an exchange?
that is a good question I am asking the same... Jump to: