[ANN] [ARO] | Arionum | CPU+GPU+Masternode | PHP Based |Decentralized Revolution - page 107.

wenjiannin

newbie

Activity: 76

Merit: 0

Quote from: Devilz666 on January 18, 2018, 04:37:07 AM

Quote from: bonipper on January 16, 2018, 10:32:43 PM

Quote from: Devilz666 on January 15, 2018, 04:44:12 PM

Ran this on 2 PCs

a very old i3 ULV gives 11 h/s and my FX 8350 gives 22 h/s (with two instances)

I get around 10 times performance on FX 8350 otherwise, is this right? No incentive for running it on a Higher end CPUs?

Are you solo mining? How many blocks a day are you getting?

I am not solo mining. I am mining on two old laptops and getting just around 20 h/s . In two days I've earned around 900+ coins. Would have put my desktop's 8 core on this algo but it just doesn't seem to get more than 22 h/s so I am using it on cryptonight algo instead.

Hello, I have 2 E3 speed is 35H/S, but the mineral pool does not show me the information is my wallet address is not right? My address is 3ba3CsoFc1QWWvvoSHG5E1wLe77yBxj4iW7fr4861TDAKgUpKGUhCZeVmjn3ZaY

DtvTLEw25expLGatJUs9knq1e

How long can I see the information you have excavated, please help you

wenjiannin

newbie

Activity: 76

Merit: 0

I dig for an hour and did not show anything inside the mine can not find any information My address is 3ba3CsoFc1QWWvvoSHG5E1wLe77yBxj4iW7fr4861TDAKgUpKGUhCZeVmjn3ZaY
dtvTLEw25expLGatJUs9knq1e I used 2 sets of E3 about 110H / S
Who knows where the problem is?

murgorx

member

Activity: 443

Merit: 13

@t3hpwnographer - thank you buddy! I did it and it worked.

t3hpwnographer

member

Activity: 196

Merit: 11

Quote from: murgorx on January 19, 2018, 07:17:03 AM

So, uhm, I'm trying to create a wallet, but I get the following error message.

Enter command: balance
No ARO wallet found. Generating a new wallet!
Would you like to encrypt this wallet? (y/N) y
Password:*****
Confirm Password:*****
Could not generate the EC key pair. Please check the openssl binaries.Welcome to the Arionum Light CLI Wallet!
Type help for a list of commands!
ECHO is off.

could you please tell me what to do?

Assuming you're running Windows, you need to install the openssl binaries (there's a download link on http://aropool.com/info) then restart your computer. After that you should be able to generate a wallet.

murgorx

member

Activity: 443

Merit: 13

So, uhm, I'm trying to create a wallet, but I get the following error message.

Enter command: balance
No ARO wallet found. Generating a new wallet!
Would you like to encrypt this wallet? (y/N) y
Password:*****
Confirm Password:*****
Could not generate the EC key pair. Please check the openssl binaries.Welcome to the Arionum Light CLI Wallet!
Type help for a list of commands!
ECHO is off.

could you please tell me what to do?

stepollo

newbie

Activity: 50

Merit: 0

Quote from: wishesme on January 19, 2018, 06:55:50 AM

Quote from: ErusuEna on January 19, 2018, 06:27:10 AM

Quote from: ErusuEna on January 19, 2018, 02:52:04 AM

Quote from: wishesme on January 19, 2018, 02:44:01 AM

Quote from: ErusuEna on January 19, 2018, 02:39:40 AM

please tell me!
Since mining is done with "Start_Miner.bat" and the hash rate is also displayed, I think mining is done safely, but if you start "Start-Wallet.bat" and enter the command: balance ... .
-------------------------------------------------------------
Your address is: ~~~~~~
Using node: ~~~~~~~~
Balance: 0.00000000
-------------------------------------------------------------
I can not check my balance, but how can I check it?

i think you should wait for half hour or a hour

understood
I will wait for a while

thank you

About 5 hours passed since the mining was started, so I tried to check the balance, I did a balance command at start-wallet, but it is displayed at 0.00000000.
Is it possible that mining is executed without causing errors even if my registered wallet's address is incorrect?

Maybe you use wrong address?

If you look in the pool stats there are a lot of bad addresses still mining after days.. some check if is a valid address should be added

wishesme

jr. member

Activity: 126

Merit: 1

Quote from: ErusuEna on January 19, 2018, 06:27:10 AM

Quote from: ErusuEna on January 19, 2018, 02:52:04 AM

Quote from: wishesme on January 19, 2018, 02:44:01 AM

Quote from: ErusuEna on January 19, 2018, 02:39:40 AM

please tell me!
Since mining is done with "Start_Miner.bat" and the hash rate is also displayed, I think mining is done safely, but if you start "Start-Wallet.bat" and enter the command: balance ... .
-------------------------------------------------------------
Your address is: ~~~~~~
Using node: ~~~~~~~~
Balance: 0.00000000
-------------------------------------------------------------
I can not check my balance, but how can I check it?

i think you should wait for half hour or a hour

understood
I will wait for a while

thank you

About 5 hours passed since the mining was started, so I tried to check the balance, I did a balance command at start-wallet, but it is displayed at 0.00000000.
Is it possible that mining is executed without causing errors even if my registered wallet's address is incorrect?

Maybe you use wrong address?

ErusuEna

newbie

Activity: 19

Merit: 0

Quote from: ErusuEna on January 19, 2018, 02:52:04 AM

Quote from: wishesme on January 19, 2018, 02:44:01 AM

Quote from: ErusuEna on January 19, 2018, 02:39:40 AM

please tell me!
Since mining is done with "Start_Miner.bat" and the hash rate is also displayed, I think mining is done safely, but if you start "Start-Wallet.bat" and enter the command: balance ... .
-------------------------------------------------------------
Your address is: ~~~~~~
Using node: ~~~~~~~~
Balance: 0.00000000
-------------------------------------------------------------
I can not check my balance, but how can I check it?

i think you should wait for half hour or a hour

understood
I will wait for a while

thank you

About 5 hours passed since the mining was started, so I tried to check the balance, I did a balance command at start-wallet, but it is displayed at 0.00000000.
Is it possible that mining is executed without causing errors even if my registered wallet's address is incorrect?

Proc.dev

full member

Activity: 287

Merit: 102

Quote from: stepollo on January 19, 2018, 04:31:06 AM

yes for now it is not so user friendly..i had less difficulties from a linux os

The instruction of Win mining and wallet operation is clear. Miner is stable for days. Of course it's just CLI but Arionum is less than 2 weeks age old.

aideanhao888

newbie

Activity: 29

Merit: 0

Can dig mines under win 7 system Huh

stepollo

newbie

Activity: 50

Merit: 0

yes for now it is not so user friendly..i had less difficulties from a linux os

aideanhao888

newbie

Activity: 29

Merit: 0

It's too complicated to understand how to operate Huh

rain_wins

newbie

Activity: 56

Merit: 0

Nice project, I already downloaded the Windows bindle to try it.

ErusuEna

newbie

Activity: 19

Merit: 0

Quote from: wishesme on January 19, 2018, 02:44:01 AM

Quote from: ErusuEna on January 19, 2018, 02:39:40 AM

please tell me!
Since mining is done with "Start_Miner.bat" and the hash rate is also displayed, I think mining is done safely, but if you start "Start-Wallet.bat" and enter the command: balance ... .
-------------------------------------------------------------
Your address is: ~~~~~~
Using node: ~~~~~~~~
Balance: 0.00000000
-------------------------------------------------------------
I can not check my balance, but how can I check it?

i think you should wait for half hour or a hour

understood
I will wait for a while

thank you

wishesme

jr. member

Activity: 126

Merit: 1

Quote from: ErusuEna on January 19, 2018, 02:39:40 AM

please tell me!
Since mining is done with "Start_Miner.bat" and the hash rate is also displayed, I think mining is done safely, but if you start "Start-Wallet.bat" and enter the command: balance ... .
-------------------------------------------------------------
Your address is: ~~~~~~
Using node: ~~~~~~~~
Balance: 0.00000000
-------------------------------------------------------------
I can not check my balance, but how can I check it?

i think you should wait for half hour or a hour

ErusuEna

newbie

Activity: 19

Merit: 0

please tell me!
Since mining is done with "Start_Miner.bat" and the hash rate is also displayed, I think mining is done safely, but if you start "Start-Wallet.bat" and enter the command: balance ... .
-------------------------------------------------------------
Your address is: ~~~~~~
Using node: ~~~~~~~~
Balance: 0.00000000
-------------------------------------------------------------
I can not check my balance, but how can I check it?

p3ngu1n

sr. member

Activity: 304

Merit: 250

Quote from: ?? on ??

It's not about buying too late, it's about selling too early.
Buy and hold. Longterm. 10+ years.

Without the circulation of the currency, the currency will die.
Moderate supply is necessary.

leonard852

full member

Activity: 372

Merit: 100

Quote from: tigermonkey on January 18, 2018, 10:17:29 PM

Looks interesting coin - CPU only and fixed percentage of transaction fee which is pretty unique.

first altcoin base PHP ,it's amazing . hope project run smoothly.

ruleben

member

Activity: 123

Merit: 10

I restart miner.bat and still cant generate more threads
any other method？

nevermind321

newbie

Activity: 38

Merit: 0

You dont have telegram or similar group chat?

Topic: [ANN] [ARO] | Arionum | CPU+GPU+Masternode | PHP Based |Decentralized Revolution - page 107. (Read 71575 times)