don't worry about utc price dropping a lil bit, ppl are selling utc to invest into other coins. They'll be back.
who is ppl and when will they be back? 
Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 337. (Read 946650 times)
March 18, 2014, 06:23:09 PM
March 18, 2014, 06:16:18 PM
Damn UTC is bleeding on the exchanges and buy orders getting removed!! Sad all the same coins are growing!!
we need media of PUMP attention! i know that this is not a pump coin but we need to get some notice! that people are talking about it!
you see it now with BC ( blackcoin ) it getting pumped right now and every exchange is talking about it!!
meby a joint venture that we can raise some BTC to get a community pump going?
Last buy on UTC one hour ago for the rest all sells, if we dont do anything now!! there is nothing to sell anymore
So STOP bitching about your miner settings, because if your mining coins have no value what are you doing?
if your mining coins have no value what are you doing? +++++++++1 we need media of PUMP attention! i know that this is not a pump coin but we need to get some notice! that people are talking about it!
you see it now with BC ( blackcoin ) it getting pumped right now and every exchange is talking about it!!
meby a joint venture that we can raise some BTC to get a community pump going?
Last buy on UTC one hour ago for the rest all sells, if we dont do anything now!! there is nothing to sell anymore
So STOP bitching about your miner settings, because if your mining coins have no value what are you doing?
March 18, 2014, 06:11:21 PM
Hey Christian, 10mh/s on my 780 WF here. 
61% power, so 201w from the psu.
1267mhz core and 6660mhz memory effective. 65c (25c ambient)
61% power, so 201w from the psu.
1267mhz core and 6660mhz memory effective. 65c (25c ambient)
March 18, 2014, 06:04:23 PM
I'm such a dumbass, I bought into the Spaincoin hype this weekend, sold all my UTC hoping to make a quick buck and buy back more UTC. Instead I went from 3900 UTC to 300 UTC, lost my ass. That was a hard lesson to learn, 3 months of mining/trading basically down the drain 
Ok how is that possible?
You sold utc at 260 and bought spa at 0.005? Then dumped it at 0.0008 then bought utc at 290?
Something like that. And yes, I know, really stupid move
March 18, 2014, 05:58:03 PM
I'm such a dumbass, I bought into the Spaincoin hype this weekend, sold all my UTC hoping to make a quick buck and buy back more UTC. Instead I went from 3900 UTC to 300 UTC, lost my ass. That was a hard lesson to learn, 3 months of mining/trading basically down the drain
Ok how is that possible?
You sold utc at 260 and bought spa at 0.005? Then dumped it at 0.0008 then bought utc at 290?
March 18, 2014, 05:53:51 PM
I have come to the conclusion that while using this forum most people who chat here are not around which means they are proly on the otherside of the world from me. That means while I sit in my chair, all you mofo's are upside down! haha.
hahaha
March 18, 2014, 05:45:37 PM
I'm such a dumbass, I bought into the Spaincoin hype this weekend, sold all my UTC hoping to make a quick buck and buy back more UTC. Instead I went from 3900 UTC to 300 UTC, lost my ass. That was a hard lesson to learn, 3 months of mining/trading basically down the drain
March 18, 2014, 05:35:17 PM
cya guys goodluck with UTC hope all goes well im out
March 18, 2014, 05:29:39 PM
My wallet UTC V 1.6 is very SLOW to open , my OS is windows 8 64 bit .
yep. Never used to be slow on opening now it seems slower each time. Downloading block chain every time I guess takes longer and longer. Someone suggested a fix to the devs on the Utc website,(irc channel I think) but no one even respondedlook for a file called debug.log and tail -f it.
it takes long time till it connects to the utc network on first start.
just be patient an leave the wallet running.
Do you mean delete the contents of the debug log, I checked it and it is veryyyyy longggg!
ok, sorry, I am a unix man. tail -f is following the file content as it is written.
maybe there is some similar function or software for windows too.
I just wanted to point out that debug log states what is happening, and there you can see what is happening.
it will not fix the initial loading time of the wallet, sorry, just give u an insight of what is going on.
and yes, you can dele the file if it gets to big.
it is recreated on every start if non existing.
Just please make sure you DO NOT delete your wallet.dat file, that is your wallet, the most important file on your pc.
March 18, 2014, 04:57:54 PM
My wallet UTC V 1.6 is very SLOW to open , my OS is windows 8 64 bit .
yep. Never used to be slow on opening now it seems slower each time. Downloading block chain every time I guess takes longer and longer. Someone suggested a fix to the devs on the Utc website,(irc channel I think) but no one even respondedlook for a file called debug.log and tail -f it.
it takes long time till it connects to the utc network on first start.
just be patient an leave the wallet running.
Do you mean delete the contents of the debug log, I checked it and it is veryyyyy longggg!
March 18, 2014, 04:50:46 PM
hmmmmm, I'm not getting close those numbers with my current setup. The best I can manage is with my original setting of about 84Khs per card and a WU of:
GPU 0 = WU: 72.6
GPU 1 = WU: 84.6
GPU 2 = WU: 75.6
GPU 3 = WU: 72.6
I tried increasing TC to 191712 and adding --lookup-gap 3, however; that dropped my hash rate to the 60's and my WU to the 50's. My invalid % also went up on my mining pool.
Wirly, would you be willing to share your .conf or .bat file so I can give it a shot on my system?
GPU 0 = WU: 72.6
GPU 1 = WU: 84.6
GPU 2 = WU: 75.6
GPU 3 = WU: 72.6
I tried increasing TC to 191712 and adding --lookup-gap 3, however; that dropped my hash rate to the 60's and my WU to the 50's. My invalid % also went up on my mining pool.
Wirly, would you be willing to share your .conf or .bat file so I can give it a shot on my system?
I have the hd7950 Boost edition stock oc is 925/1250
also my system memory is 8gb dram @ 1600mhz
Here my .bat settings:
--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 --thread-concurrency 16128 --no-submit-stale --lookup-gap 2 --gpu-reorder -I 12 --gpu-vddc 1.12 --auto-gpu --gpu-powertune 20 --gpu-engine 925-1100
--gpu-memclock 1250 --gpu-fan 65 --temp-overheat 80 --temp-cutoff 90 --queue 0 --scan-time 1 --expiry 10
this gave me hashrate 104 kh/s,
then changed win virtual memory set to "manual" at "22000mb" (64gb ssd drive) for programs- Not let windows decide and this increased hashrate by 10% to 114kh/s and a WU of 93 to 110 on 11 cards. This surprised me
Edit: now I am getting the occasional random hw error, not sure if this is related to pool difficulty or anything else but wu is still good so I will let it go for a bit and see what happens. Don't want to lower the "cha-ching" rate if don't have to!
March 18, 2014, 04:31:17 PM
My wallet UTC V 1.6 is very SLOW to open , my OS is windows 8 64 bit .
yep. Never used to be slow on opening now it seems slower each time. Downloading block chain every time I guess takes longer and longer. Someone suggested a fix to the devs on the Utc website,(irc channel I think) but no one even respondedlook for a file called debug.log and tail -f it.
it takes long time till it connects to the utc network on first start.
just be patient an leave the wallet running.
March 18, 2014, 04:11:32 PM
My wallet UTC V 1.6 is very SLOW to open , my OS is windows 8 64 bit .
yep. Never used to be slow on opening now it seems slower each time. Downloading block chain every time I guess takes longer and longer. Someone suggested a fix to the devs on the Utc website,(irc channel I think) but no one even responded March 18, 2014, 04:09:53 PM
I just read it 
March 18, 2014, 03:51:53 PM
With this bat file I don`t have any HW errors or rejects
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
ultracoinminer --scrypt-jane -o stratum+tcp://**** -u **** -p **** -I 12 -g 2 -w 256 --thread-concurrency 16384 --lookup-gap 3 --gpu-engine 1000 --gpu-memclock 1250 --gpu-vddc 1.150 --gpu-powertune 20 --gpu-fan 50-100 --temp-cutoff 80 --temp-target 67 --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --failover-only --no-submit-stale
I use this miner : h t t p : // tinyurl . com /qgak7dg and I get 108 KH/s.
This is not very fast but this is the only way I can mine without HW errors and rejects.
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
ultracoinminer --scrypt-jane -o stratum+tcp://**** -u **** -p **** -I 12 -g 2 -w 256 --thread-concurrency 16384 --lookup-gap 3 --gpu-engine 1000 --gpu-memclock 1250 --gpu-vddc 1.150 --gpu-powertune 20 --gpu-fan 50-100 --temp-cutoff 80 --temp-target 67 --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --failover-only --no-submit-stale
I use this miner : h t t p : // tinyurl . com /qgak7dg and I get 108 KH/s.
This is not very fast but this is the only way I can mine without HW errors and rejects.
Thanks, we were testing p2pool, and thus the HW errors, normal pools work just fine.
March 18, 2014, 03:50:23 PM
tons of HW error on the p2pool ;-/
Ok, no worries, it is caused by very low difficulty sent by the pools as a starting difficulty, cpu miners work fine as they can handle low diff, gpus get HW, this was seen on other coin p2pools like VTC, i will fix that as soon as i get a chance, thanks for your tests, i will keep you updated!
Will be glad to test anytime. (MET time zone).
March 18, 2014, 03:43:53 PM
tons of HW error on the p2pool ;-/
Ok, no worries, it is caused by very low difficulty sent by the pools as a starting difficulty, cpu miners work fine as they can handle low diff, gpus get HW, this was seen on other coin p2pools like VTC, i will fix that as soon as i get a chance, thanks for your tests, i will keep you updated!
March 18, 2014, 03:29:18 PM
With this bat file I don`t have any HW errors or rejects
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
ultracoinminer --scrypt-jane -o stratum+tcp://**** -u **** -p **** -I 12 -g 2 -w 256 --thread-concurrency 16384 --lookup-gap 3 --gpu-engine 1000 --gpu-memclock 1250 --gpu-vddc 1.150 --gpu-powertune 20 --gpu-fan 50-100 --temp-cutoff 80 --temp-target 67 --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --failover-only --no-submit-stale
I use this miner : h ttps ://mega .co.nz/#!AwkFGQRR!LYwU5DXzLeVKyTXpVsNgNifre8ANFxHUVHwgt0Q-rZs and I get 108 KH/s.
This is not very fast but this is the only way I can mine without HW errors and rejects.
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
ultracoinminer --scrypt-jane -o stratum+tcp://**** -u **** -p **** -I 12 -g 2 -w 256 --thread-concurrency 16384 --lookup-gap 3 --gpu-engine 1000 --gpu-memclock 1250 --gpu-vddc 1.150 --gpu-powertune 20 --gpu-fan 50-100 --temp-cutoff 80 --temp-target 67 --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --failover-only --no-submit-stale
I use this miner : h ttps ://mega .co.nz/#!AwkFGQRR!LYwU5DXzLeVKyTXpVsNgNifre8ANFxHUVHwgt0Q-rZs and I get 108 KH/s.
This is not very fast but this is the only way I can mine without HW errors and rejects.
March 18, 2014, 03:24:46 PM
Is there any chance we get p2pool configurations up and running ?
for now, its just centralized pools..
not good long term.
for now, its just centralized pools..
not good long term.
I think that is being explored, though somebody please correct me if I am wrong.
I worked on a fork of p2pool for UTC, the result is good enough, still in final testing, i will release it in a few days, here's the current url, if anyone wants to help with test:
http://thepool.pw:8336
you can point your miners to http://thepool.pw:8336 with your UTC address as username.
help testing much appreciated, thank!
Awesome!
Cool, I will set up p2pool too, if you share the code. So we at least have two, for fall back ?
Of course i will share the code, that's the point of having p2pools, i just need to make sure it works fine before i can share it, i will try to finish up the tests in the next few days, the fork is ready and accepts the shares, i need to make sure payments are sent when a block is found, also fix the difficulty settings, cpu mining looks fine, gpus still get HW errors until the difficulty sent to them is higher, but overall looks good!
Your tests results will be very helpful.
Ok, redirecting some of my hash power to your pool. Hope will receive some coins
Great, thanks, help much appreciated, don't worry, if a block is found and there is a problem with payment (probably not), i will manually send due coins!
What should I set intensity to ? 280x, been on 12 with normal pools.
switched to yout p2pool, and just hw errors in thousands
Tried I=8, tried I=10, I=12, I=20
getting just hw errors
GPU 0: 71.0C 2805RPM | 133.4K/129.6Kh/s | A:32 R:0 HW:9484 WU: 10.0/m I:12
GPU 1: 73.0C 2214RPM | 133.5K/130.2Kh/s | A: 0 R:0 HW:8400 WU: 9.5/m I:12
;-/
User:Ub8GmAGTtPNhdTUsu4ZVb7aoVMuYneKxfe
I use this for my R9 280X :
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
ultracoinminer --scrypt-jane -o stratum+tcp://**** -u **** -p **** -I 12 -g 2 -w 256 --thread-concurrency 16384 --lookup-gap 3 --gpu-engine 1000 --gpu-memclock 1250 --gpu-vddc 1.150 --gpu-powertune 20 --gpu-fan 50-100 --temp-cutoff 80 --temp-target 67 --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --failover-only --no-submit-stale
I use this miner : http://[Suspicious link removed]/qgak7dg
Almost same on my side.
tons of HW error on the p2pool ;-/
March 18, 2014, 03:17:48 PM
Is there any chance we get p2pool configurations up and running ?
for now, its just centralized pools..
not good long term.
for now, its just centralized pools..
not good long term.
I think that is being explored, though somebody please correct me if I am wrong.
I worked on a fork of p2pool for UTC, the result is good enough, still in final testing, i will release it in a few days, here's the current url, if anyone wants to help with test:
http://thepool.pw:8336
you can point your miners to http://thepool.pw:8336 with your UTC address as username.
help testing much appreciated, thank!
Awesome!
Cool, I will set up p2pool too, if you share the code. So we at least have two, for fall back ?
Of course i will share the code, that's the point of having p2pools, i just need to make sure it works fine before i can share it, i will try to finish up the tests in the next few days, the fork is ready and accepts the shares, i need to make sure payments are sent when a block is found, also fix the difficulty settings, cpu mining looks fine, gpus still get HW errors until the difficulty sent to them is higher, but overall looks good!
Your tests results will be very helpful.
Ok, redirecting some of my hash power to your pool. Hope will receive some coins
Great, thanks, help much appreciated, don't worry, if a block is found and there is a problem with payment (probably not), i will manually send due coins!
What should I set intensity to ? 280x, been on 12 with normal pools.
switched to yout p2pool, and just hw errors in thousands
Tried I=8, tried I=10, I=12, I=20
getting just hw errors
GPU 0: 71.0C 2805RPM | 133.4K/129.6Kh/s | A:32 R:0 HW:9484 WU: 10.0/m I:12
GPU 1: 73.0C 2214RPM | 133.5K/130.2Kh/s | A: 0 R:0 HW:8400 WU: 9.5/m I:12
;-/
User:Ub8GmAGTtPNhdTUsu4ZVb7aoVMuYneKxfe
I use this for my R9 280X :
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
ultracoinminer --scrypt-jane -o stratum+tcp://**** -u **** -p **** -I 12 -g 2 -w 256 --thread-concurrency 16384 --lookup-gap 3 --gpu-engine 1000 --gpu-memclock 1250 --gpu-vddc 1.150 --gpu-powertune 20 --gpu-fan 50-100 --temp-cutoff 80 --temp-target 67 --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --failover-only --no-submit-stale
I use this miner : h t t p : // tinyurl . com /qgak7dg
Jump to: