Topic: [ANN] Blacknet | IBO for BlackCoin | New code | PoS | No ICO - page 1264. (Read 2510302 times)
Do the TX fees go to PoS block solvers?
http://maarx.nl/maarx.nl/blackcoin/distribution/
Top 3 addresses now have 57 million BC which is 76.5% of all BC if this chart is accurate.
Most likely those are exchanges which is a good thing because that means those BC are being redistributed. This also means that people would rather have instant access to BC on the exchange rather then collect 1%.
Since exchanges are getting the 1% is it even fair that they charge any fees for BC? haha
Top 3 addresses now have 57 million BC which is 76.5% of all BC if this chart is accurate.
Most likely those are exchanges which is a good thing because that means those BC are being redistributed. This also means that people would rather have instant access to BC on the exchange rather then collect 1%.
Since exchanges are getting the 1% is it even fair that they charge any fees for BC? haha
Earlier today Maarx said that is all wrong as it's on the wrong fork (based on the original rich list which is definitely on wrong fork) - he said he was rewriting it from the ground up right now, so expect that to change fairly dramatically and ignore what you see now.
Then basically, though you might want to use sgminer.
url: stratum+tcp://blackcoinpool.com:3333
username: BCADDRESS
password: what you make up.
or command line: sgminer.exe -o stratum+tcp://blackcoinpool.com:3333 -u walletreceiveaddress -p something
Hi JamesR1,
I have downloaded sgminer-4.1.153-v2 and edited the sgminer.conf file as shown below:
https://i.imgur.com/IPCTFpv.jpg
When I use xxxx as username and xxxx as password and hit Launch - Scrypt.bat or Launch - Nscrypt.bat it seems to start working just fine.
https://i.imgur.com/KSxc4rR.jpg
However, when I use my actual wallets receive address and a made up password, I keep on getting this error:
https://i.imgur.com/9OSjltK.jpg
Any ideas on why my wallets address seems to present the error, but using all xxxx's seems to be OK?
[/quote]
In the second image did you try entering the url then hit enter?
Though the bcmultipool page says its operational but records no hash.
I'm trying to get things up and running here.
Oh, by the way, with those low kh/s you might also need to post you card setup.
It might be the threads.
http://maarx.nl/maarx.nl/blackcoin/distribution/
Top 3 addresses now have 57 million BC which is 76.5% of all BC if this chart is accurate.
Most likely those are exchanges which is a good thing because that means those BC are being redistributed. This also means that people would rather have instant access to BC on the exchange rather then collect 1%.
Since exchanges are getting the 1% is it even fair that they charge any fees for BC? haha
Top 3 addresses now have 57 million BC which is 76.5% of all BC if this chart is accurate.
Most likely those are exchanges which is a good thing because that means those BC are being redistributed. This also means that people would rather have instant access to BC on the exchange rather then collect 1%.
Since exchanges are getting the 1% is it even fair that they charge any fees for BC? haha
Kudos for the generosity displayed in the last few pages but I suspect some of you may have fallen for it.
I've seen some of these same individuals in a troll box spouting the same story and leeching off the good will of others.
I've lost coins at dodgy exchanges too and seeing these parasites take advantage of a crap situation is deplorable.
I've seen some of these same individuals in a troll box spouting the same story and leeching off the good will of others.
I've lost coins at dodgy exchanges too and seeing these parasites take advantage of a crap situation is deplorable.
Need a little help with multipool
I have entered my BC address to the appropriate field over at BlackcoinPool.com, and I am then required to enter the following string:
Can someone let me know where exactly I have to enter this? Do I need to download CGMiner 3.7.2 and if so, which file in CGMiner do I edit/add this string?
Sorry, but very new to this and would like to get the ball rolling.
I have entered my BC address to the appropriate field over at BlackcoinPool.com, and I am then required to enter the following string:
Code:
stratum+tcp://blackcoinpool.com:3333-u BCADDRESS -p PASSWORD
Can someone let me know where exactly I have to enter this? Do I need to download CGMiner 3.7.2 and if so, which file in CGMiner do I edit/add this string?
Sorry, but very new to this and would like to get the ball rolling.
If you have a blackcoin wallet, which you should, create an recieve address. Copy and paste that into the username part, make up a password as it should work on their site from the stratum address.
Then basically, though you might want to use sgminer.
url: stratum+tcp://blackcoinpool.com:3333
username: BCADDRESS
password: what you make up.
or command line: sgminer.exe -o stratum+tcp://blackcoinpool.com:3333 -u walletreceiveaddress -p something
Hi JamesR1,
I have downloaded sgminer-4.1.153-v2 and edited the sgminer.conf file as shown below:
https://i.imgur.com/IPCTFpv.jpg
When I use xxxx as username and xxxx as password and hit Launch - Scrypt.bat or Launch - Nscrypt.bat it seems to start working just fine.
https://i.imgur.com/KSxc4rR.jpg
However, when I use my actual wallets receive address and a made up password, I keep on getting this error:
https://i.imgur.com/9OSjltK.jpg
Any ideas on why my wallets address seems to present the error, but using all xxxx's seems to be OK?
The password you first connect with to the server HAS to be the same you use on other miners with the same wallet address! This password is used to administer your private page. Your miners will be denied access if you don't use the same password. This is synchronized across SHA and Scrypt so please keep this in mind.
__________________________________________
try add new bc addres to wallet and new password
I have never used this address to mine with? Very new to Blackcoin, and the only other coins I have mined in the past are Heavycoin (via 1.GH) and Quarkcoin. (CPU mining) I did mine Dogecoin a while back, but that address would be completely different?
I take it that I am doing something pretty stupid, so any help would do.
Mintpal is down?
I think so. I'm trying to pull out my 7.5k BC I have on mintpal because I'm not wanting to lose anymore coins like the 2k I lost in the whole cryptorush debacle. Sucks I basically lost a 1-2 weeks worth of mined coins converted to BC due to that bullshit. Oh well..... lesson learned.
Just got my balance transferred to my wallet so it should be up and running now.
Mintpal is up for me
Can someone help me figure out how to use the blackcoin-qt? I downloaded the version on the blackcoin website now.
I'm looking at the wallet and it says out of sync.
What are the steps I need to take to move my coins from mintpal to this wallet? Receive coins? I literally have no clue what a "qt" even is but am panicked to get my coins off of an exchange as I just woke to the news of the theft.
I'm looking at the wallet and it says out of sync.
What are the steps I need to take to move my coins from mintpal to this wallet? Receive coins? I literally have no clue what a "qt" even is but am panicked to get my coins off of an exchange as I just woke to the news of the theft.
Go to Receive coins tab, create new address. then withdraw your coins to that address.
Wallet will take a while to sync, after that your coins will arrive at your wallet.
thank you! I didn't realize it really was as simple as a transfer.
Now to let mintcoin to allow me in. Keeps saying my username/password is incorrect.
Mintpal is down?
I think so. I'm trying to pull out my 7.5k BC I have on mintpal because I'm not wanting to lose anymore coins like the 2k I lost in the whole cryptorush debacle. Sucks I basically lost a 1-2 weeks worth of mined coins converted to BC due to that bullshit. Oh well..... lesson learned.
Need a little help with multipool
I have entered my BC address to the appropriate field over at BlackcoinPool.com, and I am then required to enter the following string:
Can someone let me know where exactly I have to enter this? Do I need to download CGMiner 3.7.2 and if so, which file in CGMiner do I edit/add this string?
Sorry, but very new to this and would like to get the ball rolling.
I have entered my BC address to the appropriate field over at BlackcoinPool.com, and I am then required to enter the following string:
Code:
stratum+tcp://blackcoinpool.com:3333-u BCADDRESS -p PASSWORD
Can someone let me know where exactly I have to enter this? Do I need to download CGMiner 3.7.2 and if so, which file in CGMiner do I edit/add this string?
Sorry, but very new to this and would like to get the ball rolling.
If you have a blackcoin wallet, which you should, create an recieve address. Copy and paste that into the username part, make up a password as it should work on their site from the stratum address.
Then basically, though you might want to use sgminer.
url: stratum+tcp://blackcoinpool.com:3333
username: BCADDRESS
password: what you make up.
or command line: sgminer.exe -o stratum+tcp://blackcoinpool.com:3333 -u walletreceiveaddress -p something
Hi JamesR1,
I have downloaded sgminer-4.1.153-v2 and edited the sgminer.conf file as shown below:
https://i.imgur.com/IPCTFpv.jpg
When I use xxxx as username and xxxx as password and hit Launch - Scrypt.bat or Launch - Nscrypt.bat it seems to start working just fine.
https://i.imgur.com/KSxc4rR.jpg
However, when I use my actual wallets receive address and a made up password, I keep on getting this error:
https://i.imgur.com/9OSjltK.jpg
Any ideas on why my wallets address seems to present the error, but using all xxxx's seems to be OK?
The password you first connect with to the server HAS to be the same you use on other miners with the same wallet address! This password is used to administer your private page. Your miners will be denied access if you don't use the same password. This is synchronized across SHA and Scrypt so please keep this in mind.
__________________________________________
try add new bc addres to wallet and new password
http://pastebin.com/2dPXmGvR
[17:10] fyrstikken been here yet?
[17:10] <@fyrstikken> hey hey
[17:10] <@fyrstikken> sorry, was busy doing a video
[17:11] <@fyrstikken> http://www.businessinsider.com/thieves-swipe-nearly-70000-from-bitcoin-exchange-2014-3
[17:11] dense day, ha? lot of things to attend to
[17:11] <@fyrstikken> our first Business Insider article
[17:11] <@pianowarrior> that's one way to get some press
[17:11] <@pianowarrior>
[17:11] <@fyrstikken> now they have to do a follow up when we release good news later
[17:11] <@pianowarrior> hahaha
[17:12] so, there will be good news?
[17:12] says 1 billion but means 1mil
[17:13] <@fyrstikken> I hope LaZ sleeps well and is not too scared about the media-rush Im doing these days, but I need more customers to the exchange and more miners and when this BlackCoin thing happen - I ordered full publicity about it to use it for what it was worth
[17:13] makes ppl say what? and click on article
[17:13] <@fyrstikken> yes
[17:13] <@Exel9> What the hell happen to peoples they look like possessed by the devil
[17:13] <@fyrstikken> next article will be "Bitcoin exchange refund its users" or something like that
[17:13] <@Exel9> doing crazy just for fews coins
[17:14] <@fyrstikken> hehe yes, its the love of item
[17:14] <@Exel9> they can't wait and see the final conclusion
[17:14] <@fyrstikken> I totally understand their frustration, but they should not be afraid
[17:14] <@Exel9> yeah , but is over reacting
[17:14] fyrstikken: well you have crashed crs with it, i hope that the good news will be enough to recover from this disastrous state
[17:14] <@Exel9> there is no understanding
[17:15] <@fyrstikken> HerrKaiser, you realize that I can now buy back the shares I sold for half price?
[17:15] <@fyrstikken> and the revenue it generates is a superb revenue
[17:16] <@fyrstikken> I just bought 50K shares
[17:16] <@fyrstikken> for almost nothing - all based on a smokescreen from BlackCoin
[17:16] well, it's your business
[17:17] have to catch the train, bye!
[17:17] <@fyrstikken> ok
[17:10]
[17:10] <@fyrstikken> hey hey
[17:10] <@fyrstikken> sorry, was busy doing a video
[17:11] <@fyrstikken> http://www.businessinsider.com/thieves-swipe-nearly-70000-from-bitcoin-exchange-2014-3
[17:11]
[17:11] <@fyrstikken> our first Business Insider article
[17:11] <@pianowarrior> that's one way to get some press
[17:11] <@pianowarrior>
[17:11] <@fyrstikken> now they have to do a follow up when we release good news later
[17:11] <@pianowarrior> hahaha
[17:12]
[17:12]
[17:13] <@fyrstikken> I hope LaZ sleeps well and is not too scared about the media-rush Im doing these days, but I need more customers to the exchange and more miners and when this BlackCoin thing happen - I ordered full publicity about it to use it for what it was worth
[17:13]
[17:13] <@fyrstikken> yes
[17:13] <@Exel9> What the hell happen to peoples they look like possessed by the devil
[17:13] <@fyrstikken> next article will be "Bitcoin exchange refund its users" or something like that
[17:13] <@Exel9> doing crazy just for fews coins
[17:14] <@fyrstikken> hehe yes, its the love of item
[17:14] <@Exel9> they can't wait and see the final conclusion
[17:14] <@fyrstikken> I totally understand their frustration, but they should not be afraid
[17:14] <@Exel9> yeah , but is over reacting
[17:14]
[17:14] <@Exel9> there is no understanding
[17:15] <@fyrstikken> HerrKaiser, you realize that I can now buy back the shares I sold for half price?
[17:15] <@fyrstikken> and the revenue it generates is a superb revenue
[17:16] <@fyrstikken> I just bought 50K shares
[17:16] <@fyrstikken> for almost nothing - all based on a smokescreen from BlackCoin
[17:16]
[17:17]
[17:17] <@fyrstikken> ok
If this is legit, thats big news.
Need a little help with multipool
I have entered my BC address to the appropriate field over at BlackcoinPool.com, and I am then required to enter the following string:
Can someone let me know where exactly I have to enter this? Do I need to download CGMiner 3.7.2 and if so, which file in CGMiner do I edit/add this string?
Sorry, but very new to this and would like to get the ball rolling.
I have entered my BC address to the appropriate field over at BlackcoinPool.com, and I am then required to enter the following string:
Code:
stratum+tcp://blackcoinpool.com:3333-u BCADDRESS -p PASSWORD
Can someone let me know where exactly I have to enter this? Do I need to download CGMiner 3.7.2 and if so, which file in CGMiner do I edit/add this string?
Sorry, but very new to this and would like to get the ball rolling.
If you have a blackcoin wallet, which you should, create an recieve address. Copy and paste that into the username part, make up a password as it should work on their site from the stratum address.
Then basically, though you might want to use sgminer.
url: stratum+tcp://blackcoinpool.com:3333
username: BCADDRESS
password: what you make up.
or command line: sgminer.exe -o stratum+tcp://blackcoinpool.com:3333 -u walletreceiveaddress -p something
Hi JamesR1,
I have downloaded sgminer-4.1.153-v2 and edited the sgminer.conf file as shown below:
https://i.imgur.com/IPCTFpv.jpg
When I use xxxx as username and xxxx as password and hit Launch - Scrypt.bat or Launch - Nscrypt.bat it seems to start working just fine.
https://i.imgur.com/KSxc4rR.jpg
However, when I use my actual wallets receive address and a made up password, I keep on getting this error:
https://i.imgur.com/9OSjltK.jpg
Any ideas on why my wallets address seems to present the error, but using all xxxx's seems to be OK?
Mintpal is down?
Must be Operation Shitcoin's extortion division.
Would be a silly target, mintpal is mainly a BC exchange. And BC absorbs bad coins, we have a similar agenda.
Mintpal is down?
Must be Operation Shitcoin's extortion division.
Mintpal is down?
Can someone help me figure out how to use the blackcoin-qt? I downloaded the version on the blackcoin website now.
I'm looking at the wallet and it says out of sync.
What are the steps I need to take to move my coins from mintpal to this wallet? Receive coins? I literally have no clue what a "qt" even is but am panicked to get my coins off of an exchange as I just woke to the news of the theft.
I'm looking at the wallet and it says out of sync.
What are the steps I need to take to move my coins from mintpal to this wallet? Receive coins? I literally have no clue what a "qt" even is but am panicked to get my coins off of an exchange as I just woke to the news of the theft.
Go to Receive coins tab, create new address. then withdraw your coins to that address.
Wallet will take a while to sync, after that your coins will arrive at your wallet.
I havent received a single coin in 48hours on the multipool whats going on 
Ask on their IRC chat, you are more likely to get a fruitful answer there.
Can someone help me figure out how to use the blackcoin-qt? I downloaded the version on the blackcoin website now.
I'm looking at the wallet and it says out of sync.
What are the steps I need to take to move my coins from mintpal to this wallet? Receive coins? I literally have no clue what a "qt" even is but am panicked to get my coins off of an exchange as I just woke to the news of the theft.
I'm looking at the wallet and it says out of sync.
What are the steps I need to take to move my coins from mintpal to this wallet? Receive coins? I literally have no clue what a "qt" even is but am panicked to get my coins off of an exchange as I just woke to the news of the theft.
Jump to: