[ANN] ccminer 2.3 - opensource - GPL (tpruvot) - page 48.

Elder III

sr. member

Activity: 1246

Merit: 274

Quote from: stas260385 on September 25, 2017, 07:00:53 PM

Heloo all!
Look what i see now on http://yiimp.ccminer.org/site/miners
It looks like someone knows how to run XEVAN algo by ccminer or it's someone mod it

Yeah I think someone must have it working on nvidia now. AMD profitability is going to take a massive hit on that algorithm I'm afraid. :/ Provided that whomever is using it actually steps forward and takes the bounty by making it public.

stas260385

newbie

Activity: 38

Merit: 0

Heloo all!
Look what i see now on http://yiimp.ccminer.org/site/miners
It looks like someone knows how to run XEVAN algo by ccminer or it's someone mod it

https://ibb.co/er2rDk

insaniak

full member

Activity: 137

Merit: 100

I'm still trying to figure out why I'm getting the message ccminer has stopped working. When ccminer is ran it does use 70-80% CPU and when I message appears I have a feelings it's peaking at 100% anyone else have these issues? What can I do? Using 8x 1070 and G3900 cpu

daberti

sr. member

Activity: 266

Merit: 250

Quote from: PollysCracker on September 25, 2017, 11:42:19 AM

Quote from: daberti on September 25, 2017, 11:27:41 AM

Quote from: PollysCracker on September 25, 2017, 10:17:11 AM

Quote from: daberti on September 25, 2017, 10:06:38 AM

Quote from: PollysCracker on September 25, 2017, 10:00:04 AM

Quote from: daberti on September 25, 2017, 09:43:43 AM

Miner should tell you in green "Yes". If not, you actually did NOT mine.
May I recommend you to mine Signatum or Denarius? -a skunkash and -a tribus (which has been dramatically optimized in ccminer) respectively

You sure may, but do you think it will be of any good/profitability with such low hashrate? and i have 2 other computers availlable, is it possible to bundle these 3 miners toghetter so they collaborately mine the block toghetter, increasing the total hashrate?

Of course it is!
Please PM to me as this would imply an OT.

Will do some digging on these coins tomorow and i'll get back to you in a pm then, but what is an OT exactly?
Thank you for your help so far!

OT= Out of Topic
Back to scrypt algo: there are ASIC miners for it which make GPU mining out of question

Aha ok, and with these other 2 coins, asic mining is not allowed yet then i assume? around what percentage of the total hashpool should a miner be around to have decent cost to rewards ratio? min 5% or more

You're right in both statements: if reward method is PPLNS you need to hold that percentage at least.

PollysCracker

newbie

Activity: 59

Merit: 0

Quote from: daberti on September 25, 2017, 11:27:41 AM

Quote from: PollysCracker on September 25, 2017, 10:17:11 AM

Quote from: daberti on September 25, 2017, 10:06:38 AM

Quote from: PollysCracker on September 25, 2017, 10:00:04 AM

Quote from: daberti on September 25, 2017, 09:43:43 AM

Miner should tell you in green "Yes". If not, you actually did NOT mine.
May I recommend you to mine Signatum or Denarius? -a skunkash and -a tribus (which has been dramatically optimized in ccminer) respectively

You sure may, but do you think it will be of any good/profitability with such low hashrate? and i have 2 other computers availlable, is it possible to bundle these 3 miners toghetter so they collaborately mine the block toghetter, increasing the total hashrate?

Of course it is!
Please PM to me as this would imply an OT.

Will do some digging on these coins tomorow and i'll get back to you in a pm then, but what is an OT exactly?
Thank you for your help so far!

OT= Out of Topic
Back to scrypt algo: there are ASIC miners for it which make GPU mining out of question

Aha ok, and with these other 2 coins, asic mining is not allowed yet then i assume? around what percentage of the total hashpool should a miner be around to have decent cost to rewards ratio? min 5% or more

daberti

sr. member

Activity: 266

Merit: 250

Quote from: PollysCracker on September 25, 2017, 10:17:11 AM

Quote from: daberti on September 25, 2017, 10:06:38 AM

Quote from: PollysCracker on September 25, 2017, 10:00:04 AM

Quote from: daberti on September 25, 2017, 09:43:43 AM

Miner should tell you in green "Yes". If not, you actually did NOT mine.
May I recommend you to mine Signatum or Denarius? -a skunkash and -a tribus (which has been dramatically optimized in ccminer) respectively

You sure may, but do you think it will be of any good/profitability with such low hashrate? and i have 2 other computers availlable, is it possible to bundle these 3 miners toghetter so they collaborately mine the block toghetter, increasing the total hashrate?

Of course it is!
Please PM to me as this would imply an OT.

Will do some digging on these coins tomorow and i'll get back to you in a pm then, but what is an OT exactly?
Thank you for your help so far!

OT= Out of Topic
Back to scrypt algo: there are ASIC miners for it which make GPU mining out of question

PollysCracker

newbie

Activity: 59

Merit: 0

Quote from: daberti on September 25, 2017, 10:06:38 AM

Quote from: PollysCracker on September 25, 2017, 10:00:04 AM

Quote from: daberti on September 25, 2017, 09:43:43 AM

Miner should tell you in green "Yes". If not, you actually did NOT mine.
May I recommend you to mine Signatum or Denarius? -a skunkash and -a tribus (which has been dramatically optimized in ccminer) respectively

You sure may, but do you think it will be of any good/profitability with such low hashrate? and i have 2 other computers availlable, is it possible to bundle these 3 miners toghetter so they collaborately mine the block toghetter, increasing the total hashrate?

Of course it is!
Please PM to me as this would imply an OT.

Will do some digging on these coins tomorow and i'll get back to you in a pm then, but what is an OT exactly?
Thank you for your help so far!

daberti

sr. member

Activity: 266

Merit: 250

Quote from: PollysCracker on September 25, 2017, 10:00:04 AM

Quote from: daberti on September 25, 2017, 09:43:43 AM

Miner should tell you in green "Yes". If not, you actually did NOT mine.
May I recommend you to mine Signatum or Denarius? -a skunkash and -a tribus (which has been dramatically optimized in ccminer) respectively

You sure may, but do you think it will be of any good/profitability with such low hashrate? and i have 2 other computers availlable, is it possible to bundle these 3 miners toghetter so they collaborately mine the block toghetter, increasing the total hashrate?

Of course it is!
Please PM to me as this would imply an OT.

PollysCracker

newbie

Activity: 59

Merit: 0

Quote from: daberti on September 25, 2017, 09:43:43 AM

Miner should tell you in green "Yes". If not, you actually did NOT mine.
May I recommend you to mine Signatum or Denarius? -a skunkash and -a tribus (which has been dramatically optimized in ccminer) respectively

You sure may, but do you think it will be of any good/profitability with such low hashrate? and i have 2 other computers availlable, is it possible to bundle these 3 miners toghetter so they collaborately mine the block toghetter, increasing the total hashrate?

daberti

sr. member

Activity: 266

Merit: 250

Quote from: PollysCracker on September 25, 2017, 09:19:04 AM

Quote from: daberti on September 24, 2017, 06:06:23 PM

Quote from: PollysCracker on September 24, 2017, 03:12:17 PM

Quote from: daberti on September 24, 2017, 01:25:37 PM

What GPU have you got? What coin are you mining?

GPU: NVIDIA Gforce GT650M, CPU: Intel i7 3630QM @ 2,4Ghz, 8Gb RAM 7,88 availlable, Windows 7
Cryptobridge(BCO) - Scrypt POW https://bitcointalksearch.org/topic/anncryptobridgebcogateway-to-bitshares-released-now-beta-2015949

Is -a scrypt present in your batch?

thanks for your help, i think its finally mining, i am getting 40kHash/sec, i'm thinkin thats not much am i correct? will i be able to mine Cryptobridge with that at current difficulty?
Is there a way to see progress of the mining because the logs only show me the hashrate and gpu temp

Also is there a way to make it possible that 2 miners work toghetter on the same block for increased hashrate or will both miners work on their own on the same block?

Miner should tell you in green "Yes". If not, you actually did NOT mine.
May I recommend you to mine Signatum or Denarius? -a skunkash and -a tribus (which has been dramatically optimized in ccminer) respectively

PollysCracker

newbie

Activity: 59

Merit: 0

Quote from: daberti on September 24, 2017, 06:06:23 PM

Quote from: PollysCracker on September 24, 2017, 03:12:17 PM

Quote from: daberti on September 24, 2017, 01:25:37 PM

What GPU have you got? What coin are you mining?

GPU: NVIDIA Gforce GT650M, CPU: Intel i7 3630QM @ 2,4Ghz, 8Gb RAM 7,88 availlable, Windows 7
Cryptobridge(BCO) - Scrypt POW https://bitcointalksearch.org/topic/anncryptobridgebcogateway-to-bitshares-released-now-beta-2015949

Is -a scrypt present in your batch?

thanks for your help, i think its finally mining, i am getting 40kHash/sec, i'm thinkin thats not much am i correct? will i be able to mine Cryptobridge with that at current difficulty?
Is there a way to see progress of the mining because the logs only show me the hashrate and gpu temp
http://oi65.tinypic.com/mttikz.jpg

Also is there a way to make it possible that 2 miners work toghetter on the same block for increased hashrate or will both miners work on their own on the same block?

grchina

sr. member

Activity: 476

Merit: 278

Quote from: pallas on September 25, 2017, 06:49:26 AM

Quote from: daberti on September 25, 2017, 06:47:38 AM

Quote from: grchina on September 25, 2017, 06:03:16 AM

try ewbf miner and compare it to others,you should be getting 20-30 sols less then others on same card/settings

Ditto

that probably applies to windows.
besides, I don't mine with ewbf.

yea its on windows,also agree with you on other matter i have dual core/2t cpu with 5x1080 ti rigs and its working good.Only difference i noticed was on ewbf

pallas

legendary

Activity: 2716

Merit: 1094

Black Belt Developer

Quote from: daberti on September 25, 2017, 06:51:46 AM

Quote from: pallas on September 25, 2017, 05:59:59 AM

I've been running a 5 cards rig with a sempron single core for many months without issues and at max speed (multiple algos and card types).
It depends on the miner and the OS, though.

Which cards? Choose an algo, do benchmark and post the overall speed, without data it is all bullshitting. (my data is posted above)
This is valid for everyone Wink

I've been making miners since 2014, do you think I need to post something to be trusted?

daberti

sr. member

Activity: 266

Merit: 250

Quote from: pallas on September 25, 2017, 05:59:59 AM

I've been running a 5 cards rig with a sempron single core for many months without issues and at max speed (multiple algos and card types).
It depends on the miner and the OS, though.

Which cards? Choose an algo, do benchmark and post the overall speed, without data it is all bullshitting. (my data is posted above)
This is valid for everyone Wink

pallas

legendary

Activity: 2716

Merit: 1094

Black Belt Developer

Quote from: daberti on September 25, 2017, 06:47:38 AM

Quote from: grchina on September 25, 2017, 06:03:16 AM

try ewbf miner and compare it to others,you should be getting 20-30 sols less then others on same card/settings

Ditto

that probably applies to windows.
besides, I don't mine with ewbf.

daberti

sr. member

Activity: 266

Merit: 250

Quote from: grchina on September 25, 2017, 06:03:16 AM

try ewbf miner and compare it to others,you should be getting 20-30 sols less then others on same card/settings

Ditto

grchina

sr. member

Activity: 476

Merit: 278

Quote from: pallas on September 25, 2017, 05:59:59 AM

I've been running a 5 cards rig with a sempron single core for many months without issues and at max speed (multiple algos and card types).
It depends on the miner and the OS, though.

try ewbf miner and compare it to others,you should be getting 20-30 sols less then others on same card/settings

pallas

legendary

Activity: 2716

Merit: 1094

Black Belt Developer

I've been running a 5 cards rig with a sempron single core for many months without issues and at max speed (multiple algos and card types).
It depends on the miner and the OS, though.

daberti

sr. member

Activity: 266

Merit: 250

Quote from: cashen on September 24, 2017, 10:37:55 PM

I run all G3900 and G3930 with 4GB ram. all 8 card rigs. I do not have issues.

Yet you won't have top performance.
If you lke you can drive a Porsche with city car tires....

Just issue on your system the following command and post the output, please:
ccminer.exe -a neoscrypt --benchmark

PollysCracker

newbie

Activity: 59

Merit: 0

Quote from: daberti on September 24, 2017, 06:06:23 PM

Quote from: PollysCracker on September 24, 2017, 03:12:17 PM

Quote from: daberti on September 24, 2017, 01:25:37 PM

What GPU have you got? What coin are you mining?

GPU: NVIDIA Gforce GT650M, CPU: Intel i7 3630QM @ 2,4Ghz, 8Gb RAM 7,88 availlable, Windows 7
Cryptobridge(BCO) - Scrypt POW https://bitcointalksearch.org/topic/anncryptobridgebcogateway-to-bitshares-released-now-beta-2015949

Is -a scrypt present in your batch?

No, but I saw in the logs that ccminer set the algoritme to auto, i will try this when i get home though and let you know if it worked

Topic: [ANN] ccminer 2.3 - opensource - GPL (tpruvot) - page 48. (Read 500113 times)