Slower than EWBF equihash by 10%, maybe i do smth wrong?
Use one of the dedicated miners for Equihash.If i use ewbf not in nicehash: 1 of my 1080ti crash even on stock settings
so i looking for some alternative
Topic: [ANN] ccminer 2.3 - opensource - GPL (tpruvot) - page 51. (Read 500113 times)
If i use ewbf not in nicehash: 1 of my 1080ti crash even on stock settings
so i looking for some alternative
Slower than EWBF equihash by 10%, maybe i do smth wrong?
Use one of the dedicated miners for Equihash. annnnnnnnd why would i be getting stratum authentication failure 
Did you use a [ADDRESS].[RIGNAME] format? With some pools you need to 'register' your worker first.
yes i registered so not sure what issue is?! this my bat file
ccminer -a myr-gr -o stratum+tcp://xvg-mine.idcray.com:10061 -u xxxx.xxxx -p xxxxx, -i 19, --cpu-priority=3
pause
annnnnnnnd why would i be getting stratum authentication failure
Did you use a [ADDRESS].[RIGNAME] format? With some pools you need to 'register' your worker first.
annnnnnnnd why would i be getting stratum authentication failure
Thanks now it works fine
I just put - l 15x60 and it goes better.
May I ask you how did you come to -l 15x60 setting?
TIA
can someone please explain this error to me? trying to mine verge (myr-gr algo) using any ccminer version -
reject reason : low difficulty share of 1.8.......
when im using the lyra algo i get around 20mhs and then with myr-gr algo says 180mhs but keep getting the error....
thanks
reject reason : low difficulty share of 1.8.......
when im using the lyra algo i get around 20mhs and then with myr-gr algo says 180mhs but keep getting the error....
thanks
Hi,
I have a pc with 2x GTX 1080 Ti.
With one card I had no problem.
But the system keeps freezing when I start mining with Tpruvot.(skunk)
After a few seconds the system freezes.
Whats wrong with that ?
I have already tried to change to intensity - no changes.
Other Miners are ok - and with 1 card I had no problems.
PC:
4 GB Ram
2x GTX 1080 ti
Win 10 64 bit
Intel CPU
BR
I have a pc with 2x GTX 1080 Ti.
With one card I had no problem.
But the system keeps freezing when I start mining with Tpruvot.(skunk)
After a few seconds the system freezes.
Whats wrong with that ?
I have already tried to change to intensity - no changes.
Other Miners are ok - and with 1 card I had no problems.
PC:
4 GB Ram
2x GTX 1080 ti
Win 10 64 bit
Intel CPU
BR
Hmm, i dont see issues about that... mining skunk with many cards since beginning... but i boycott win10 for now
even if i bought a licence, its only on my second disk (waiting a version without auto reboot) Are you considering implementing/enabling BTC-auto exchange on yiimp.eu in the near future?
Thank you
Thank you
no, if some day i do that, it will be a secondary pool.. but for now the exchanges are not ready for that..
need some intermediate platform services like shapeshift do.. (btw you can use shapeshift to convert your coins)
Thanks now it works fine
I just put - l 15x60 and it goes better.
You know which is the better conf for 1070 or 1080ti ?
If 1070 has different value than 1080ti how can I tell the miner which device has this value?
You're welcome.
No, I don't know the best cryptonight conf for these cards, sorry
Second question: I think Epsylon3 himself is the more suitable to assist you
Hello,
i have 4 1070 and 2 1080ti
8 gb ram
Virtual memory 25gb
Windows 10 PRO
Driver 385.41
The only miner i can use is ccminer all others fail including alexis 1.0.
I tried the specific ccminer for cryptonight but it shows me illegal memory access errors.
If I use intensity 10 it works with ccminer, if I try to increase intensity it shows again illegal memory access.
What I tried is to reinstall older drivers but the issue still.
I think to reinstall win 10 in a new drive and increase virtual memory.
Any suggestions before I try this solution ?
i have 4 1070 and 2 1080ti
8 gb ram
Virtual memory 25gb
Windows 10 PRO
Driver 385.41
The only miner i can use is ccminer all others fail including alexis 1.0.
I tried the specific ccminer for cryptonight but it shows me illegal memory access errors.
If I use intensity 10 it works with ccminer, if I try to increase intensity it shows again illegal memory access.
What I tried is to reinstall older drivers but the issue still.
I think to reinstall win 10 in a new drive and increase virtual memory.
Any suggestions before I try this solution ?
Forget about intensity. ccminer will set it properly. You can play with -l switch, ie. -l 32x16 or bfactor switch.
Said that the most rewarding algo for your GPUs is Equihash and by a long distance, see www.whattomine.com .
Thanks now it works fine
I just put - l 15x60 and it goes better.
You know which is the better conf for 1070 or 1080ti ?
If 1070 has different value than 1080ti how can I tell the miner which device has this value?
What is the max. intensity for skunk with this miner? Maybe 21??
Start at -i 8 and gradually increase
What is the max. intensity for skunk with this miner? Maybe 21??
Hi,
I have a pc with 2x GTX 1080 Ti.
With one card I had no problem.
But the system keeps freezing when I start mining with Tpruvot.(skunk)
After a few seconds the system freezes.
Whats wrong with that ?
I have already tried to change to intensity - no changes.
Other Miners are ok - and with 1 card I had no problems.
PC:
4 GB Ram
2x GTX 1080 ti
Win 10 64 bit
Intel CPU
BR
I have a pc with 2x GTX 1080 Ti.
With one card I had no problem.
But the system keeps freezing when I start mining with Tpruvot.(skunk)
After a few seconds the system freezes.
Whats wrong with that ?
I have already tried to change to intensity - no changes.
Other Miners are ok - and with 1 card I had no problems.
PC:
4 GB Ram
2x GTX 1080 ti
Win 10 64 bit
Intel CPU
BR
Hello,
i have 4 1070 and 2 1080ti
8 gb ram
Virtual memory 25gb
Windows 10 PRO
Driver 385.41
The only miner i can use is ccminer all others fail including alexis 1.0.
I tried the specific ccminer for cryptonight but it shows me illegal memory access errors.
If I use intensity 10 it works with ccminer, if I try to increase intensity it shows again illegal memory access.
What I tried is to reinstall older drivers but the issue still.
I think to reinstall win 10 in a new drive and increase virtual memory.
Any suggestions before I try this solution ?
i have 4 1070 and 2 1080ti
8 gb ram
Virtual memory 25gb
Windows 10 PRO
Driver 385.41
The only miner i can use is ccminer all others fail including alexis 1.0.
I tried the specific ccminer for cryptonight but it shows me illegal memory access errors.
If I use intensity 10 it works with ccminer, if I try to increase intensity it shows again illegal memory access.
What I tried is to reinstall older drivers but the issue still.
I think to reinstall win 10 in a new drive and increase virtual memory.
Any suggestions before I try this solution ?
Forget about intensity. ccminer will set it properly. You can play with -l switch, ie. -l 32x16 or bfactor switch.
Said that the most rewarding algo for your GPUs is Equihash and by a long distance, see www.whattomine.com .
Hello,
i have 4 1070 and 2 1080ti
8 gb ram
Virtual memory 25gb
Windows 10 PRO
Driver 385.41
The only miner i can use is ccminer all others fail including alexis 1.0.
I tried the specific ccminer for cryptonight but it shows me illegal memory access errors.
If I use intensity 10 it works with ccminer, if I try to increase intensity it shows again illegal memory access.
What I tried is to reinstall older drivers but the issue still.
I think to reinstall win 10 in a new drive and increase virtual memory.
Any suggestions before I try this solution ?
Try Linux. i have 4 1070 and 2 1080ti
8 gb ram
Virtual memory 25gb
Windows 10 PRO
Driver 385.41
The only miner i can use is ccminer all others fail including alexis 1.0.
I tried the specific ccminer for cryptonight but it shows me illegal memory access errors.
If I use intensity 10 it works with ccminer, if I try to increase intensity it shows again illegal memory access.
What I tried is to reinstall older drivers but the issue still.
I think to reinstall win 10 in a new drive and increase virtual memory.
Any suggestions before I try this solution ?
Hello,
i have 4 1070 and 2 1080ti
8 gb ram
Virtual memory 25gb
Windows 10 PRO
Driver 385.41
The only miner i can use is ccminer all others fail including alexis 1.0.
I tried the specific ccminer for cryptonight but it shows me illegal memory access errors.
If I use intensity 10 it works with ccminer, if I try to increase intensity it shows again illegal memory access.
What I tried is to reinstall older drivers but the issue still.
I think to reinstall win 10 in a new drive and increase virtual memory.
Any suggestions before I try this solution ?
i have 4 1070 and 2 1080ti
8 gb ram
Virtual memory 25gb
Windows 10 PRO
Driver 385.41
The only miner i can use is ccminer all others fail including alexis 1.0.
I tried the specific ccminer for cryptonight but it shows me illegal memory access errors.
If I use intensity 10 it works with ccminer, if I try to increase intensity it shows again illegal memory access.
What I tried is to reinstall older drivers but the issue still.
I think to reinstall win 10 in a new drive and increase virtual memory.
Any suggestions before I try this solution ?
no
Can you add verge blake2s to yiimp please?
I'm mining Monero on CPU and GPU using this program
The pool says i get higher hash rate from the cpu, how's that even possible? am i missing something?
The pool says i get higher hash rate from the cpu, how's that even possible? am i missing something?
Jump to: