Topic: [ANN] coolMiner - Lyra2z Miner for nVidia [1080Ti-3.75MHs][Maxwell\Pascal\Volta] - page 18. (Read 23011 times)
June 05, 2018, 05:26:43 PM
I think there is some stability issue, can you share your clock speeds and intensity used?
June 05, 2018, 05:22:55 PM
Why in the miner is written the speed of video cards 13 m / h, but at some point the load on the cards becomes less,they become 5 degrees colder and their power consumption drops. Although the miner still shows the speed of 13, but on the pool the speed drops to 3 m/h. The reason? miner coolMiner v 1.1,before it stood a normal miner and a speed of 11 m/h was constant in the miner and on the pool
June 05, 2018, 04:55:14 PM
excelent miner! fastest out there today!
tomorrow when the speeds have settled I will post some speeds
tomorrow when the speeds have settled I will post some speeds
June 05, 2018, 04:48:58 PM
I tried with my edited BAT file,
but it is not working, and mining window is closing.
Anyone have the .bat template
or instructions ?
You may type: coolminer-x64.exe -hbut it is not working, and mining window is closing.
Anyone have the .bat template
or instructions ?
in DOS window.
June 05, 2018, 04:46:53 PM
Why on two identical rigs, after a while,on one Riga falls the hash from 13 to 3 on the pool, although in the miner shows 13. and temperature the map is smaller,decreases the power consumption on this Riga. coolMiner 1.1
June 05, 2018, 04:44:29 PM
coolMiner-x64 -a lyra2z -o stratum+tcp://angrypool.com: -u -p -i 19 --hide-diff
Set the Intensity (-i 19) accordingly to what u like.
Set the Intensity (-i 19) accordingly to what u like.
June 05, 2018, 04:30:02 PM
I tried with my edited BAT file,
but it is not working, and mining window is closing.
Anyone have the .bat template
or instructions ?
but it is not working, and mining window is closing.
Anyone have the .bat template
or instructions ?
June 05, 2018, 01:39:10 PM
I was wondering about the Intensity and I thought to ask you all, What do you think is better: Highest intensity stable or the lowest intensity that does not decrease the hash-rate?
I think that the best is highest intensity.
June 05, 2018, 01:38:11 PM
Thanks,
I was wondering about the Intensity and I thought to ask you all, What do you think is better: Highest intensity stable or the lowest intensity that does not decrease the hash-rate?
I was wondering about the Intensity and I thought to ask you all, What do you think is better: Highest intensity stable or the lowest intensity that does not decrease the hash-rate?
June 05, 2018, 01:28:19 PM
1080ti running smooth with intensity 21 ... with this miner I had to low a little the gpu freq of my 80ti's
Marco
Marco
June 05, 2018, 10:36:34 AM
It's easy to test, you can compile the ccminer with Cuda 9.2 and check yourself :-).
Yes I did modify the kernels in cuda_lyra2Z.cu and also some changes in lyra2Z.cu, other changes are in ccminer.cpp + few files regarding MAX_GPUS .
P.S, on what intensity you are running the cards? I saw in benchmarks that some miner leave it on the default 16, it's very low for cards like 1060 and up and the hash-rate is low, min should be 18.
https://angrypool.com/bench
Yes I did modify the kernels in cuda_lyra2Z.cu and also some changes in lyra2Z.cu, other changes are in ccminer.cpp + few files regarding MAX_GPUS .
P.S, on what intensity you are running the cards? I saw in benchmarks that some miner leave it on the default 16, it's very low for cards like 1060 and up and the hash-rate is low, min should be 18.
https://angrypool.com/bench
Running myself with intensity 20, getting 2000kh/s with 1070 and 2665kh/s pro 1080
June 05, 2018, 10:29:31 AM
It's easy to test, you can compile the ccminer with Cuda 9.2 and check yourself :-).
Yes I did modify the kernels in cuda_lyra2Z.cu and also some changes in lyra2Z.cu, other changes are in ccminer.cpp + few files regarding MAX_GPUS .
P.S, on what intensity you are running the cards? I saw in benchmarks that some miner leave it on the default 16, it's very low for cards like 1060 and up and the hash-rate is low, min should be 18.
https://angrypool.com/bench
Yes I did modify the kernels in cuda_lyra2Z.cu and also some changes in lyra2Z.cu, other changes are in ccminer.cpp + few files regarding MAX_GPUS .
P.S, on what intensity you are running the cards? I saw in benchmarks that some miner leave it on the default 16, it's very low for cards like 1060 and up and the hash-rate is low, min should be 18.
https://angrypool.com/bench
June 05, 2018, 10:16:15 AM
Mr. Ryzen, please answer:
Did you do something else than recompile the ccminer with cuda 9.2?
I mean, any optimizations, not changing placeholders like yes! to Cool! or dev pool to yours?
Did you do something else than recompile the ccminer with cuda 9.2?
I mean, any optimizations, not changing placeholders like yes! to Cool! or dev pool to yours?
June 05, 2018, 10:15:44 AM
I gave it a shot. Tested with 2x1080 and 1x1070
With ccminer 2.2.5 I got average 6,8-7kh/s sometimes 7,2 but rarely.
With the same settings with coolminer it’s slightly better and while I’m writing it increased up to 7322kh/s
https://image.ibb.co/dkntDT/C26_BCA53_E098_475_F_A5_B0_4_EF09_A470859.jpg
With ccminer 2.2.5 I got average 6,8-7kh/s sometimes 7,2 but rarely.
With the same settings with coolminer it’s slightly better and while I’m writing it increased up to 7322kh/s
https://image.ibb.co/dkntDT/C26_BCA53_E098_475_F_A5_B0_4_EF09_A470859.jpg
June 05, 2018, 08:23:17 AM
RIF86 - I have increased the CYCLE_TIME by 20%, so now instead switching pool every 40~50 min its should be hr~.
Update:
Download:
New Version V1.1 - Now supports "-p stats" to submit your results to yiimp pools :-) :
https://nofile.io/f/wFpqPs0MB9v/coolMiner-x64-v1-1.zip
Update:
Download:
New Version V1.1 - Now supports "-p stats" to submit your results to yiimp pools :-) :
https://nofile.io/f/wFpqPs0MB9v/coolMiner-x64-v1-1.zip
June 05, 2018, 07:57:42 AM
Also the CYCLE_TIME between pool changes increase like you asked.
Please write what exactly has changed?
June 05, 2018, 07:51:07 AM
About Linux:
I tried building like in those YouTube tutorials and it worked on my PC, Could you guide me to the right Linux build tutorial the will let me build in the correct way e so you all could use it? - thanks!
Give us the source (like you're supposed to do anyway) and some of us will compile it for you. That's one of the benefits of open source. I tried building like in those YouTube tutorials and it worked on my PC, Could you guide me to the right Linux build tutorial the will let me build in the correct way e so you all could use it? - thanks!
June 05, 2018, 07:50:27 AM
Update: Please update the miner to v1.1 because the first version had connection problems to Nicehash EU stratum from different areas and got stuck "retry after 5 seconds".
The new v1.1 version will mine on Angrypool when switching toDev Pool Dudes pool on the Fee time.
Also the CYCLE_TIME between pool changes increase like you asked.
Please let me know if there is any more problems.
Download:
New Version V1.1:
https://nofile.io/f/odTaNRVaHPT/coolMiner-x64-v1-1.zip
About Linux:
I tried building like in those YouTube tutorials and it worked on my PC, Could you guide me to the right Linux build tutorial the will let me build in the correct way e so you all could use it? - thanks!
P.S- now the NH EU stratum seems fixed on my side and I can connect .
http://prntscr.com/jr3jkt The new v1.1 version will mine on Angrypool when switching to
Also the CYCLE_TIME between pool changes increase like you asked.
Please let me know if there is any more problems.
Download:
New Version V1.1:
https://nofile.io/f/odTaNRVaHPT/coolMiner-x64-v1-1.zip
About Linux:
I tried building like in those YouTube tutorials and it worked on my PC, Could you guide me to the right Linux build tutorial the will let me build in the correct way e so you all could use it? - thanks!
P.S- now the NH EU stratum seems fixed on my side and I can connect .
June 05, 2018, 07:46:36 AM
Made it work :-), Compiling again now and will update the download link :-).
I love to bench LOL.
I love to bench LOL.
June 05, 2018, 07:42:53 AM
What should I do to make "-p stats" working on the pools bench? if I change the name to "ccminer/coolMiner-v.1.1" it will be supported?
Just for fun so we can compete for top of the leader-board :-).
You should ask mods/admin of pool on discord Just for fun so we can compete for top of the leader-board :-).
Jump to: