Topic: [ANN] CRAVE 1st POS Masternodes | Dark Assets | I2P | Market =Embrace The Dark= - page 115. (Read 826733 times)

I know ICM sugested it but not sure if anyone actually setup the bet. since its soon and few people use darkpoold, it might not happen there..

can someone tell me if blur used as currency, it will be "more anon" than crave or is there no difference?

RUN DARKPOOLD ON WINDOWS
Caution. Some of these install instructions make changes that could affect your system stability. They work for me but I take no responsibility for any problems encountered by follwing this list of directions to run cravecoin's darkpoold.py. I further take no responsibility for the reliability, availability, or any part of your experience when using darkpoold, including loss of coins, time, energy, etc etc.
OK!

Install Python 3.3 32bit   https://www.python.org/ftp/python/3.3.0/python-3.3.0.msi
download darkpoold from https://github.com/industrialcoinmagic/darkpoold (download zip, unpack it on desktop)

Add python to $Path environmental variables:
open start > right click computer, select properties, select advanced system settings, click advanced tab, click environmental variables, under system variables find variable PATH and edit it.  scroll to front of list, paste in C:\Python33\;C:\Python33\Scripts;  and save/apply

Install Pip: 
https://github.com/pypa/pip (source)
https://pip.pypa.io/en/stable/installing.html  (install procedure)
https://bootstrap.pypa.io/get-pip.py   (download this file to desktop)
open command prompt startmenu > run > type then hit enter: cmd
type in command:
cd C:/users/"yourname"/Desktop/
type in command: 
python getpip.py

Install darkpoold dependencies:
type in command:
cd darkpoold-master
type in command:
pip install -r pip-requirements.txt

*it will likely fail on crypto2.6, do the following:

download and install pycrypto2.6: 
http://www.voidspace.org.uk/downloads/pycrypto26/pycrypto-2.6.win32-py3.3.exe

download and install aspw: 
http://rogerbinns.github.io/apsw/download.html (source)
32bit https://github.com/rogerbinns/apsw/releases/download/3.8.9-r1/apsw-3.8.9-r1.win32-py3.3.exe

go to roaming appdata folder   open start > run > type then hit enter: %appdata% 
create folder named BLUR
create folder inside BLUR named darkpoold
go to craves appdata folder and edit or create crave.conf to say
Quote
txindex=1
server=1
rpcuser=user
rpcpassword=pass
rpcallowip=127.0.0.1
staking=0

start or restart your crave-qt


restart cmd prompt  startmenu > run > cmd
type in command:
cd C:/users/"yourname"/Desktop/darkpoold-master
type in command:
python darkpoold.py --backend-rpc-password=FROMCRAVECONF --backend-rpc-user=FROMCRAVECONF --rpc-password=ANYTHING server

It will now process the blockchain for darkpoold's usage (took me ~15 minutes)

leave that "server" running and open a new cmd prompt
open command prompt startmenu > run > type then hit enter: cmd
type in command:
cd C:/users/"yourname"/Desktop/darkpoold-master

All darkpoold commands start with typing:
python darkpoold.py --backend-rpc-password=FROMCRAVECONF --backend-rpc-user=FROMCRAVECONF --rpc-password=ANYTHING

you can follow that bit with whatever you like actions from this list:
Code:

    server              run the server (WARNING: not thread-safe)
    send                create and broadcast a *send* message
    order               create and broadcast an *order* message
    cravepay            create and broadcast a *CRAVEpay* message, to settle
                        an Order Match for which you owe CRAVE
    issuance            issue a new asset, issue more of an existing asset or
                        transfer the ownership of an asset
    broadcast           broadcast textual and numerical information to the
                        network
    bet                 offer to make a bet on the value of a feed
    dividend            pay dividends to the holders of an asset (in
                        proportion to their stake in it)
    burn                destroy {} to earn BLUR, during an initial period of
                        time
    cancel              cancel an open order or bet you created
    callback            callback a fraction of an asset
    rps                 open a rock-paper-scissors like game
    rpsresolve          resolve a rock-paper-scissors like game
    publish             publish arbitrary data in the blockchain
    balances            display the balances of a BLUR address
    asset               display the basic properties of a BLUR asset
    wallet              list the addresses in your backend wallet along with
                        their balances in all BLUR assets
    pending             list pending order matches awaiting CRAVEpayment from
                        you
    reparse             reparse all transactions in the database (WARNING: not
                        thread-safe)
    rollback            rollback database (WARNING: not thread-safe)
    market              fill the screen with an always up-to-date summary of
                        the BLUR market



example:

Quote
python darkpoold.py --backend-rpc-password=FROMCRAVECONF --backend-rpc-user=FROMCRAVECONF --rpc-password=ANYTHING balances

will show the BLUR ammount associated with a crave address

for every action you can type 
Quote
python darkpoold.py --backend-rpc-password=FROMCRAVECONF --backend-rpc-user=FROMCRAVECONF --rpc-password=ANYTHING -h

to get detailed help for instance:
Quote
python darkpoold.py --backend-rpc-password=FROMCRAVECONF --backend-rpc-user=FROMCRAVECONF --rpc-password=ANYTHING burn -h
returns:
Quote
usage: darkpoold burn [-h] --source SOURCE --quantity QUANTITY [--fee FEE]

optional arguments:
  -h, --help           show this help message and exit
  --source SOURCE      the source address
  --quantity QUANTITY  quantity of CRAVE to be destroyed
  --fee FEE            the exact CRAVE fee to be paid to miners

It will be possible to visualize the masternodes with the new wallet running I2P resource ?

your masternode appears to be working fine

this shows 1 payment today, 1 payment yesterday, 6 the day before, 2 the day before..  you cant average them over a day..
there has been no update since you began your masternode.
since the 10 days you've had a masternode up you've recieved 14.666 coins when http://jj12880.azurewebsites.net/cravecalc.aspx shows an average user might have gotten 24 coins given a 100% uptime, so your on the lower end of luck it seems according to that. Then again not all masternodes are always seen by http://crave.ninja/ so everyone may be getting lower payments. its mostly due to the fact that theres a lot of masternodes online.

*edit, i had figured you had stopped getting payments altogether. coincontrol would tell you if maybe you had a bad config file and your block of 500 coins staked and split or something silly/unlikely to happen

Is there a command you can use in console to check your 500 coin block? https://chainz.cryptoid.info/crave/address.dws?Bw4FYMa5PKz5AseyinJJAD72xrEirokvVQ Is my MN address and it looks ok to me from what I can see in the TX details but I don't know bout the coincontrol commands. 

which update, 2 weeks ago?

check coincontrol that your 500 coin block is still in tact

Has anyone had trouble with their masternode since last wallet update?  Mine was working like a champ till the last update and since I updated my wallet I've got no payments.  I could just be unlucky but I can't see my masternode on the list here https://chainz.cryptoid.info/crave/masternodes.dws or http://www.richlist.eu/crave/masternodes but I can see it on https://crave.ninja/ so idkwtf is going on.  Anyone else have any issues with last update if so how did you resolve them?

delete blockchain and try again.. try adding some nodes from the list here https://crave.ninja/ into a crave.conf file.

my crave qt stuck on catching up...how to speed up the sync?

its stuck 3 weeks behind endlessly

RUN DARKPOOLD ON WINDOWS
Caution. Some of these install instructions make changes that could affect your system stability. They work for me but I take no responsibility for any problems encountered by follwing this list of directions to run cravecoin's darkpoold.py. I further take no responsibility for the reliability, availability, or any part of your experience when using darkpoold, including loss of coins, time, energy, etc etc.
OK!

Install Python 3.3 32bit   https://www.python.org/ftp/python/3.3.0/python-3.3.0.msi
download darkpoold from https://github.com/industrialcoinmagic/darkpoold (download zip, unpack it on desktop)

Add python to $Path environmental variables:
open start > right click computer, select properties, select advanced system settings, click advanced tab, click environmental variables, under system variables find variable PATH and edit it.  scroll to front of list, paste in C:\Python33\;C:\Python33\Scripts;  and save/apply

Install Pip:  
https://github.com/pypa/pip (source)
https://pip.pypa.io/en/stable/installing.html  (install procedure)
https://bootstrap.pypa.io/get-pip.py   (download this file to desktop)
open command prompt startmenu > run > type then hit enter: cmd
type in command:
cd C:/users/"yourname"/Desktop/
type in command:  
python getpip.py

Install darkpoold dependencies:
type in command:
cd darkpoold-master
type in command:
pip install -r pip-requirements.txt

*it will likely fail on crypto2.6, do the following:

download and install pycrypto2.6:  
http://www.voidspace.org.uk/downloads/pycrypto26/pycrypto-2.6.win32-py3.3.exe

download and install aspw:  
http://rogerbinns.github.io/apsw/download.html (source)
32bit https://github.com/rogerbinns/apsw/releases/download/3.8.9-r1/apsw-3.8.9-r1.win32-py3.3.exe

go to roaming appdata folder   open start > run > type then hit enter: %appdata%  
create folder named BLUR
create folder inside BLUR named darkpoold
go to craves appdata folder and edit or create crave.conf to say

start or restart your crave-qt


restart cmd prompt  startmenu > run > cmd
type in command:
cd C:/users/"yourname"/Desktop/darkpoold-master
type in command:
python darkpoold.py --backend-rpc-password=FROMCRAVECONF --backend-rpc-user=FROMCRAVECONF --rpc-password=ANYTHING server

It will now process the blockchain for darkpoold's usage (took me ~15 minutes)

leave that "server" running and open a new cmd prompt
open command prompt startmenu > run > type then hit enter: cmd
type in command:
cd C:/users/"yourname"/Desktop/darkpoold-master

All darkpoold commands start with typing:
python darkpoold.py --backend-rpc-password=FROMCRAVECONF --backend-rpc-user=FROMCRAVECONF --rpc-password=ANYTHING

you can follow that bit with whatever you like actions from this list:


example:


will show the BLUR ammount associated with a crave address

for every action you can type  

to get detailed help for instance:
returns:

my portion of the bounty and the rest should go to sologap. heres my transactions
btc 19c7d2d2e06df7441e4473bf5d7d9414b7610971ca997ecaf909379f9e0d3f46-000  .02
crave 3f46d6cad7aaf4e889fa793e33b2458838db1c89a8cca8e54b999708076d44be-000  20
sologap canconfirm what addresses he would like bounties to be paid to

People are burning more and more everydays. I guess the Burn adress can hit at least 20k craves till block 60200  

just tested it out and it works like a charm!

  my crave should have just shown up 

It's because I started burning again after a while
Edit: Can someone make an icon for Blur? I sent a request to coindaddy.io to add us.

BLURs picking up, burn address is up to #13

bum bum buuuuuuuuuuuuuuuuum

pretty cool, man!

There are fees, but not that high. It is anon, and no account required.  As for the under the hood workings, Ill keep that part to myself

i know   I will be adding 500 here shortly