[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 617.

Horifatto

hero member

Activity: 658

Merit: 504

Bullandterrier

Quote from: djm34 on April 02, 2014, 02:39:01 PM

could be the faulty riser.
I had a riser which was crashing my system all the time (several time a day), didn't happen any more after I bought a new one.

Impossible. I try to change all riser with the riser of my second rig... the riser works good.

djm34

legendary

Activity: 1400

Merit: 1050

could be the faulty riser.
I had a riser which was crashing my system all the time (several time a day), didn't happen any more after I bought a new one.

Horifatto

hero member

Activity: 658

Merit: 504

Bullandterrier

Hi, i have a problem with my rig.. Windows 7 find correctly all gpu ( 4 palit 750 ti oc) but when cudaminer start the driver crash or sometimes crash all the system and appear a blu and white windows and after the pc reboot. I use powered riser and so i don't think that the problem is the power or the voltage..
With only 3 gpu the rig works fine..

Setup:
4 gtx palit 750 ti
mobo https://www.asus.com/Motherboards/M4A79XTD_EVO/#overview
windows 7
4gb ram
Psu corsair Rm 850 Gold
riser usb powered
Drivers 335

Someone can help me?? Huh

Thanks you guys

bigjme

sr. member

Activity: 350

Merit: 250

13MH/s is about right for a 750Ti

6 of them should be getting around 76MH/s as they wont all get to 13MH/s

liomojo1

hero member

Activity: 676

Merit: 500

Quote from: christian1980 on April 02, 2014, 12:48:36 PM

Quote from: christian1980 on April 02, 2014, 12:00:56 PM

Quote from: christian1980 on March 29, 2014, 02:29:29 PM

Please check my advanced monitoring and start script @ccminer.0.5.
If you dont trust my exe files, you can replace them and recompile the autoit-files (source included).
http://www.autoitscript.com/site/autoit/downloads/
Tested @6x750Ti@Win7x64
Memory clocks should be negative -500@afterburner@heavycoin

Please report @ donate...
Groestl: FVcUTnCqxWb28u45bTHNpea1bvz2MrEhsL
Heavycoin: HJDxy3USbkDsnxJTjTMR4Q9gPvrzNRZZ7G

https://drive.google.com/folderview?id=0BwCcP0dos0HKaTNRaGVrWDlwQVU

Christian

Version 2.0 is online now.
Mining process priority will be set too now.
https://drive.google.com/folderview?id=0BwCcP0dos0HKaTNRaGVrWDlwQVU --> "ccminer-v0.5-advanced-startscript-2.0.zip"

Christian

Dont forget to donate. Shocked

You can also run your cards with my workers@zhpool (included in the config) while you are testing.
Thank you for your support. Christian

I am trying it now on my single ti750 rig , but my cpu i7 920 is very loaded by the ccminer 5 cores are working almost 50%
the resu;t is 6500 for each instance 13000 for one card ,but may be the cpu is minig too.

christian1980

member

Activity: 112

Merit: 10

I was happy too early... Roll Eyes

100.000 khs is a bit too much.
Please check also and report if you get more speed.

jack80

sr. member

Activity: 434

Merit: 250

AWESOME

.

christian1980

member

Activity: 112

Merit: 10

Quote from: bigjme on April 02, 2014, 12:52:08 PM

Quote from: christian1980 on April 02, 2014, 12:48:36 PM

I think i am getting almost 10.000 khs @heavycoin with this priority modification @6x750TiOC
Still testing it...

Dont forget to donate if its true ;-)

10MH/s per card? thats pretty low
mine are sitting at 13MH/s

Post corrected :-)

bigjme

sr. member

Activity: 350

Merit: 250

Quote from: christian1980 on April 02, 2014, 12:48:36 PM

I think i am getting almost 10.000 khs @heavycoin with this priority modification @6x750TiOC
Still testing it...

Dont forget to donate if its true ;-)

10MH/s per card? thats pretty low
mine are sitting at 13MH/s

christian1980

member

Activity: 112

Merit: 10

Quote from: christian1980 on April 02, 2014, 12:00:56 PM

Quote from: christian1980 on March 29, 2014, 02:29:29 PM

Please check my advanced monitoring and start script @ccminer.0.5.
If you dont trust my exe files, you can replace them and recompile the autoit-files (source included).
http://www.autoitscript.com/site/autoit/downloads/
Tested @6x750Ti@Win7x64
Memory clocks should be negative -500@afterburner@heavycoin

Please report @ donate...
Groestl: FVcUTnCqxWb28u45bTHNpea1bvz2MrEhsL
Heavycoin: HJDxy3USbkDsnxJTjTMR4Q9gPvrzNRZZ7G

https://drive.google.com/folderview?id=0BwCcP0dos0HKaTNRaGVrWDlwQVU

Christian

Version 2.0 is online now.
Mining process priority will be set too now.
https://drive.google.com/folderview?id=0BwCcP0dos0HKaTNRaGVrWDlwQVU --> "ccminer-v0.5-advanced-startscript-2.0.zip"

Christian

Dont forget to donate. Shocked

You can also run your cards with my workers@zhpool (included in the config) while you are testing.
Thank you for your support. Christian

bigjme

sr. member

Activity: 350

Merit: 250

Quote from: djm34 on April 02, 2014, 12:21:13 PM

so many christians, cudaminer is becoming a religion

was it not a religion already? i check this thread religiously :p

djm34

legendary

Activity: 1400

Merit: 1050

so many christians, cudaminer is becoming a religion

christian1980

member

Activity: 112

Merit: 10

Quote from: christian1980 on March 29, 2014, 02:29:29 PM

Please check my advanced monitoring and start script @ccminer.0.5.
If you dont trust my exe files, you can replace them and recompile the autoit-files (source included).
http://www.autoitscript.com/site/autoit/downloads/
Tested @6x750Ti@Win7x64
Memory clocks should be negative -500@afterburner@heavycoin

Please report @ donate...
Groestl: FVcUTnCqxWb28u45bTHNpea1bvz2MrEhsL
Heavycoin: HJDxy3USbkDsnxJTjTMR4Q9gPvrzNRZZ7G

https://drive.google.com/folderview?id=0BwCcP0dos0HKaTNRaGVrWDlwQVU

Christian

Version 2.0 is online now.
Mining process priority will be set too now.
https://drive.google.com/folderview?id=0BwCcP0dos0HKaTNRaGVrWDlwQVU --> "ccminer-v0.5-advanced-startscript-2.0.zip"

Christian

binhpx

newbie

Activity: 40

Merit: 0

Does anyone mining EXE coin with GTX750Ti ? Do you have any config with highest hash rate.My rig with 6 cards GTX750Ti alway hang while the other running stable with only 1 Gtx750Ti.
cudaminer --algo=scrypt:2048 -o stratum+tcp://east1.us.stratum.dedicatedpool.com:3369 -u x -p x

bigjme

sr. member

Activity: 350

Merit: 250

Quote from: Jayjay04 on April 02, 2014, 09:40:40 AM

Is there a way to make it work with only one cudaminer ?

THX all

i believe you only can if you turn off sli. as your system will most likely be picking up one display card due to sli sharing tasks between the 2. but it shouldnt be too much of an issue with sli off as you can't mine and game at the same time Wink

Jayjay04

legendary

Activity: 1364

Merit: 1000

Is there any configuration needed in the config file for a SLI setup !?

Because when I run cudaminer with SLI activated with -d 0,1 it only detects GPU #0 and my hashrate is equal to only one gpu...
And if I start 2 cudaminer one with -d 0 and the other with -d 1, its seems that both cudaminer are working on the same gpu... so my computer is super slow...

To make it work I have to deactivate the SLI setup and run 2 instances of cudaminer... -d 0 and -d 1

Is there a way to make it work with only one cudaminer ?

THX all

bigjme

sr. member

Activity: 350

Merit: 250

Quote from: liomojo1 on April 02, 2014, 09:30:13 AM

The psu is brand new 700w coolermaster , everybody said it would more than enough. Crap.

power wise it is, but molex connectors maybe not. I am honestly not sure.
for example the molex connectors on my RM1000, they use the same wire as the GPU cables do, and they run dual 8pin pci-e so about 300W

i think a lot of it is down to the psu and the cables and their all different. but i wouldn't want to put more then 2 gpu's per molex strand even on a good psu. but that's my feeling and paranoia kicking in. i may be wrong

liomojo1

hero member

Activity: 676

Merit: 500

The psu is brand new 700w coolermaster , everybody said it would more than enough. Crap.

bigjme

sr. member

Activity: 350

Merit: 250

They actually run off the 12v inside the molex/sata cables (yellow cable)
3 per line i think is too much. We have had people with 2 on a line and the cables have burnt out.

So chances are your psu is giving up. If you get a new one spend a little extra and get a full modular psu. That way you can connect individual cards per strand (line)

liomojo1

hero member

Activity: 676

Merit: 500

They are 6 evga oc edition with no external power supply molex. The cards are connected with USB risers that are powered by the5v hdd line I have 3 on one line and 3 on another. I saw that USB risers don't take energy from the pci-e and they power the cards only from the connected 5v line. Could this be the problem?

Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 617. (Read 3426975 times)