[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 774.

patoberli

member

Activity: 106

Merit: 10

Quote from: Ashaira on February 21, 2014, 05:31:13 AM

Hmmm strange. I finally compiled the dam thing and found a pool that works but when auto starts it crashes along with the video driver (334.89).

Anyone have any ideas?

Probably to high set start configuration. What is your command line, OS and card?

sub-80

member

Activity: 103

Merit: 10

Quote from: cbuchner1 on February 21, 2014, 03:47:02 AM

Quote from: sub-80 on February 21, 2014, 03:44:48 AM

getting 25khash/sec on gtx 780 mining ultracoin. Is this hash rate correct or should i be getting higher reading on the this N factor?

at Nfactor 10 you should be seeing about half the hash rate of normal scrypt mining. you"re too low by a factor of 10. try some autotuning

sorry I meant 250khash/sec. In scrypt I usually get 606-610 khash/sec, which means I should be getting 303-305khash/sec(I can do math in my head Grin

). So still lower than it should be.
Ill try scrypt launch config.

Ashaira

newbie

Activity: 6

Merit: 0

Hmmm strange. I finally compiled the dam thing and found a pool that works but when auto starts it crashes along with the video driver (334.89).

Anyone have any ideas?

patoberli

member

Activity: 106

Merit: 10

I also just tried to deposit some YAC on bter.com, but so far it's not showing.

lumberinvestments

full member

Activity: 210

Merit: 100

If anyone could make a test tomorrow with qqcoin or velocitycoin (scrypt jane) with the 750Ti card, that would be awesome. Both coins will be at an N-factor of 11. It would be interesting to see how fast it goes compared to a R9 270x and R7 250/R7 240.
I am thinking to switch to nvidia GTX 750Ti because of lower consumption, but unfortunately if I do it only for yacoin, it is not worth compared with the R7 240 that I get 2.9 kh/sec and it costs half then power consumption is also half.
Also some speed in N-factor of 10 coin for GTX 750Ti would be very good..

Thanks a lot.

lumberinvestments

full member

Activity: 210

Merit: 100

Anyone trying to send his yac to bter.com and never getting it into the exchange ?
It is already confirmed in the block explorer, already 119 confirmations and nothing shows up in the balance at bter.com

E-mailed them but it could take days to receive an answer. ..
I know it happens exactly now when the price is growing and people would like to sell.

cbuchner1

hero member

Activity: 756

Merit: 502

Quote from: sub-80 on February 21, 2014, 03:44:48 AM

getting 25khash/sec on gtx 780 mining ultracoin. Is this hash rate correct or should i be getting higher reading on the this N factor?

at Nfactor 10 you should be seeing about half the hash rate of normal scrypt mining. you"re too low by a factor of 10. try some autotuning

sub-80

member

Activity: 103

Merit: 10

Quote from: sub-80 on February 21, 2014, 02:43:33 AM

Quote from: lumberinvestments on February 21, 2014, 02:17:08 AM

Quote from: sub-80 on February 20, 2014, 11:19:53 PM

Started mining ultracoin after panda took a tumble, but low hash rates. The highest I could get was 280khash/s.

Nfactor is 10 (N=2048)
Launch config:T12x20

bat file" cudaminer.exe --algo=scrypt-jane:UTC -o stratum+tcp://ultra.minepools.us:5301 -O user:pwd"

Any clues how to get a higher rate?

What is your card ? There are various settings for different cards. Don't tell me you get 280 khash/s with the 750ti

I will certainly shit my pants.

Ah No gtx 780

getting 25khash/sec on gtx 780 mining ultracoin. Is this hash rate correct or should i be getting higher reading on the this N factor?

ManIkWeet

full member

Activity: 182

Merit: 100

You know what, I am kind of sad that I sold my YAC for 0.000027 now :p
I'll go and get more when I get home lol.

rmindel

member

Activity: 73

Merit: 10

Quote from: patoberli on February 21, 2014, 03:08:20 AM

Use -H 2 to reduce CPU load. Should not affect hashing speed, but in some cases it does.

5% CPU now Cheesy

that's great thanks

patoberli

member

Activity: 106

Merit: 10

Use -H 2 to reduce CPU load. Should not affect hashing speed, but in some cases it does.

rmindel

member

Activity: 73

Merit: 10

Quote from: cbuchner1 on February 21, 2014, 02:57:07 AM

Quote from: rmindel on February 21, 2014, 02:50:38 AM

Running 2 Gainward 750ti on 580kh (regular scrypt)

,

For some reason cudaminer takes 70-100% CPU,
Does anyone else experience that?
The cards' performance goes down every now and again because CPU is on 100% and cuda probably needs more for some reason...

with AMD cards cg/bfg take 5-10%...

OS and command line would be helpful to understand this...

Win7 64bit + latest cudaminer (from 18-2) - running the 64bit version
cudaminer.exe -o stratum+tcp://stratum.wemineftc.com:4444 -u user -p 123 -i 0 -l T5x24 -C 1 -H 1

Thanks

cbuchner1

hero member

Activity: 756

Merit: 502

Quote from: rmindel on February 21, 2014, 02:50:38 AM

Running 2 Gainward 750ti on 580kh (regular scrypt)

,

For some reason cudaminer takes 70-100% CPU,
Does anyone else experience that?
The cards' performance goes down every now and again because CPU is on 100% and cuda probably needs more for some reason...

with AMD cards cg/bfg take 5-10%...

OS version and command line would be helpful to understand this...

cbuchner1

hero member

Activity: 756

Merit: 502

Quote from: Scribbles646 on February 21, 2014, 12:58:59 AM

Quote from: Scribbles646 on February 19, 2014, 11:55:41 PM

Took a few days off and the world goes to hell...

...I mean

Scrypt profit margin is down again alot, 40 pages of new posts in this thread, whats best to aim our NV's at right now?

Panda shitstorm yadda yadda x2

Howto profit NV .-.?

It was a f'in PANDANADO.

is it viable to solo UTC?

rmindel

member

Activity: 73

Merit: 10

Running 2 Gainward 750ti on 580kh (regular scrypt)

,

For some reason cudaminer takes 70-100% CPU,
Does anyone else experience that?
The cards' performance goes down every now and again because CPU is on 100% and cuda probably needs more for some reason...

with AMD cards cg/bfg take 5-10%...

sub-80

member

Activity: 103

Merit: 10

Quote from: lumberinvestments on February 21, 2014, 02:17:08 AM

Quote from: sub-80 on February 20, 2014, 11:19:53 PM

Started mining ultracoin after panda took a tumble, but low hash rates. The highest I could get was 280khash/s.

Nfactor is 10 (N=2048)
Launch config:T12x20

bat file" cudaminer.exe --algo=scrypt-jane:UTC -o stratum+tcp://ultra.minepools.us:5301 -O user:pwd"

Any clues how to get a higher rate?

What is your card ? There are various settings for different cards. Don't tell me you get 280 khash/s with the 750ti

I will certainly shit my pants.

Ah No gtx 780

lumberinvestments

full member

Activity: 210

Merit: 100

Quote from: sub-80 on February 20, 2014, 11:19:53 PM

Started mining ultracoin after panda took a tumble, but low hash rates. The highest I could get was 280khash/s.

Nfactor is 10 (N=2048)
Launch config:T12x20

bat file" cudaminer.exe --algo=scrypt-jane:UTC -o stratum+tcp://ultra.minepools.us:5301 -O user:pwd"

Any clues how to get a higher rate?

What is your card ? There are various settings for different cards. Don't tell me you get 280 khash/s with the 750ti

I will certainly shit my pants.

Scribbles646

newbie

Activity: 52

Merit: 0

Quote from: Scribbles646 on February 19, 2014, 11:55:41 PM

Took a few days off and the world goes to hell...

...I mean

Scrypt profit margin is down again alot, 40 pages of new posts in this thread, whats best to aim our NV's at right now?

Panda shitstorm yadda yadda x2

Howto profit NV .-.?

69charger

full member

Activity: 173

Merit: 100

Loving these cards. One's at 44C and the other at 46C. Both overclocked Grin

sub-80

member

Activity: 103

Merit: 10

Started mining ultracoin after panda took a tumble, but low hash rates. The highest I could get was 280khash/s.

Nfactor is 10 (N=2048)
Launch config:T12x20

bat file" cudaminer.exe --algo=scrypt-jane:UTC -o stratum+tcp://ultra.minepools.us:5301 -O user:pwd"

Any clues how to get a higher rate?

Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 774. (Read 3426976 times)