Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 795. (Read 3426976 times)

I know it is not really the place to ask that, but is there an "official" cgminer (or equivalent) since the original dev dumped support for gpu ? (for the moment the only thing which look serious is vertminer... for the rest it just seems everyone are doing their own business without caring about what the others do... what a mess... lol).

Guys can you help me with this, when i connect to my pc with a remote connection and try to start cudaminer it refuses to start. If i start it from the pc no problem. It is like when i connect from a remote machine it doesnt see my gtx760. How can ii fix this?

Don't mind the username, it's been edited.
I call a bug where it gets stuck sometimes for hours without any accepts, rejects or anything.

what you call a bug on your screens? ))

i only see a bug that you are using -u 123 instead -u yourmaxcoinwalletaddress

Is there anything I can do myself to fix this or is it a bug with cudaminer?

Launch command:
cudaminer-2014-02-09\x64\cudaminer.exe -a keccak -i 1 -l K1152x28 -L 512 -o stratum+tcp://maxpool.1gh.com:17333 -O 123:x -D
https://dl.dropboxusercontent.com/u/54281287/cudaminer_4.PNG
https://dl.dropboxusercontent.com/u/54281287/cudaminer_5.PNG
It seems to get stuck like this a lot.

I posted this in the 1gh.com thread, and someone recommended I ask my question here:

I'm mining MaxCoin with 1GH.com using Cudaminer, and I have an NVIDIA Quadro 4000 graphics card that I'm using. Oh, and I'm on a windows 7, 64 bit computer. Things seem to be working, but I want to be sure that I'm not potentially burning up my graphics card.  I originally set my connection string set to:

cudaminer.exe -H 1 -l F512x16 -a keccak -o stratum+tcp://maxpool.1gh.com:17333/ -u account -p password

Later I replaced F512x16 to F256x16 to see if it would run cooler.  The hash rate changed to about 27750 khash/s, but the temperature stayed exactly the same.  Usage changed from 97% to 95%.

Oh, one thing, I get an 'error message when it first starts up that  says "Given launch config 'F256x16' requires too much memory.  But then it goes ahead and starts running anyway with those parameters.  I do get that message with almost every configuration I've tried.  It only disappeared when I set it to F16x16, which was depressingly slooooooowwwwwwwwww.

I'm getting what I think is decent performance, I think... but not earning much in the way of maxcoins...seems to take a lot of effort just to earn tiny fractions.  

The command window indicates that hashes seem to average around 28280 khash/s unless I start doing stuff on my computer, then it gets slower.  Anyway, the temperature seems stable around 77 to 78 degrees, and it is operating at the gpu stated upper limits.  I'm getting quite a few yays, and only an occasional boo.  Here is a link to a screen shot of the command window and gpu z.

https://drive.google.com/file/d/0B1E0rFsXEmnBVDh6aWlGSVEzZk0/edit?usp=sharing

Can someone who understands this stuff tell me if I'm within a good range to maintain optimal performance while keeping my graphics card in good shape???  Or am I risking wearing it out?  Is there a more appropriate setting for my graphics card that I could be certain would not overtax it, but still maintain a good hash rate?

Also, I've been letting the program run pretty consistently all day (probably over 16 hours I think), and I've only earned 0.16 MAX.  That seems kind of low, doesn't it?  

Also, while I'm here, I'm new to mining, and I'm trying to figure out how to set cudaminer to solo mine maxcoin.  The directions I've found are confusing at best.  Does anyone know of any clear, easy-to-understand, simplified setup instructions for a newbie like me?  If so, could you direct me to them?  If not, would you be a dear, and maybe explain it to me in terms I might understand?

Would appreciate your thoughts.

Thanks

Katherine

I'm mining MaxCoin with 1GH.com using Cudaminer, and I have an NVIDIA Quadro 4000 graphics card that I'm using. Oh, and I'm on a windows 7, 64 bit computer. Things seem to be working, but I want to be sure that I'm not potentially burning up my graphics card.  I originally set my connection string set to:

cudaminer.exe -H 1 -l F512x16 -a keccak -o stratum+tcp://maxpool.1gh.com:17333/ -u account -p password

Later I replaced F512x16 to F256x16 to see if it would run cooler.  The hash rate changed to about 27750 khash/s, but the temperature stayed exactly the same.  Usage changed from 97% to 95%.

Oh, one thing, I get an 'error message when it first starts up that  says "Given launch config 'F256x16' requires too much memory.  But then it goes ahead and starts running anyway with those parameters.  I do get that message with almost every configuration I've tried.  It only disappeared when I set it to F16x16, which was depressingly slooooooowwwwwwwwww.
.....
.....
Can someone who understands this stuff tell me if I'm within a good range to maintain optimal performance while keeping my graphics card in good shape???  Or am I risking wearing it out?  Is there a more appropriate setting for my graphics card that I could be certain would not overtax it, but still maintain a good hash rate?

Also, I've been letting the program run pretty consistently all day (probably over 16 hours I think), and I've only earned 0.16 MAX.  That seems kind of low, doesn't it? 

What is your config for the 4gb bro' ?