THANKS AGAIN!
Topic: [ANN] ¤ DMD Diamond 3.0 | Scarce ¤ Valuable ¤ Secure | PoS 3.0 | Masternodes 65% - page 130. (Read 1260677 times)
September 20, 2017, 06:32:17 PM
All fixed working great now no more of this!
THANKS AGAIN!
THANKS AGAIN!
September 20, 2017, 06:08:58 PM
even if u already run DMDv3 wallet below madatory wallet upgrade is relevant for u if ur wallet show version number 12 on end
it MUST look like this:
it MUST look like this:
MANDATORY WALLET UPDATE:
https://github.com/DMDcoin/Diamond/releases
in case u compiled linux headless wallets check #masternodesetupguides for help
on our slack
(links to slack u find in the release link above)
https://github.com/DMDcoin/Diamond/releases
in case u compiled linux headless wallets check #masternodesetupguides for help
on our slack
(links to slack u find in the release link above)
September 20, 2017, 06:07:08 PM
Hey guys this is the only problem i have is that i get this message
But other then that my wallet is working fine too me i am not worried about old transactions not
showing i dont want too go threw the whole key moving thing cause i thought from post from top
guys in DMD said that just coping the .dat file was good a nuff now i am hearing you have to do more
then that? hope i am good the way i am set up hell my wallet says its staking with just 2 dmd and guys
out there with more not seeing blue on the diamond in the wallet? thats weird
But other then that my wallet is working fine too me i am not worried about old transactions not
showing i dont want too go threw the whole key moving thing cause i thought from post from top
guys in DMD said that just coping the .dat file was good a nuff now i am hearing you have to do more
then that? hope i am good the way i am set up hell my wallet says its staking with just 2 dmd and guys
out there with more not seeing blue on the diamond in the wallet? thats weird
i believe importing private key method is reccomended.
Worked fine for me.
just importing the old wallet.dat file might be the issue that's causing error message.
this is the correct way:
its strong suggested u follow the new migration guide
http://bit.diamonds/how_transition_short.pdf
keep using a wallet.dat from old wallet have a risc involved
i dont suggest everyone to take even if it looks like ok on a quick view
important is that u make no transactions or whatever with the old wallet.dat inside
the new DMDv3 wallet to not risc losing coins in addresses u wont have access when the worst case happens and the wallet.dat get corrupted
close the wallet rename the wallet.dat to wallet.dat.old
restart wallet
a new wallet is generated
now u can start import private keys from old DMDv2 wallet following the guide
u can have both clinets the old and the new running same time and just dump and import the keys one by one
after finished u should again have full balance but based on a native v3 wallet.dat
when finished do ur protection and backup work (encrypt wallet and backup wallet.dat )
then u should be ok
September 20, 2017, 06:01:37 PM
nubbins7, this https://bitcointalksearch.org/topic/m.22047554 will help.
September 20, 2017, 05:59:13 PM
Hey guys this is the only problem i have is that i get this message
But other then that my wallet is working fine too me i am not worried about old transactions not
showing i dont want too go threw the whole key moving thing cause i thought from post from top
guys in DMD said that just coping the .dat file was good a nuff now i am hearing you have to do more
then that? hope i am good the way i am set up hell my wallet says its staking with just 2 dmd and guys
out there with more not seeing blue on the diamond in the wallet? thats weird
But other then that my wallet is working fine too me i am not worried about old transactions not
showing i dont want too go threw the whole key moving thing cause i thought from post from top
guys in DMD said that just coping the .dat file was good a nuff now i am hearing you have to do more
then that? hope i am good the way i am set up hell my wallet says its staking with just 2 dmd and guys
out there with more not seeing blue on the diamond in the wallet? thats weird
i believe importing private key method is reccomended.
Worked fine for me.
just importing the old wallet.dat file might be the issue that's causing error message.
September 20, 2017, 05:46:58 PM
Hey guys this is the only problem i have is that i get this message
But other then that my wallet is working fine too me i am not worried about old transactions not
showing i dont want too go threw the whole key moving thing cause i thought from post from top
guys in DMD said that just coping the .dat file was good a nuff now i am hearing you have to do more
then that? hope i am good the way i am set up hell my wallet says its staking with just 2 dmd and guys
out there with more not seeing blue on the diamond in the wallet? thats weird
But other then that my wallet is working fine too me i am not worried about old transactions not
showing i dont want too go threw the whole key moving thing cause i thought from post from top
guys in DMD said that just coping the .dat file was good a nuff now i am hearing you have to do more
then that? hope i am good the way i am set up hell my wallet says its staking with just 2 dmd and guys
out there with more not seeing blue on the diamond in the wallet? thats weird
September 20, 2017, 04:50:20 PM
MANDATORY WALLET UPDATE:
https://github.com/DMDcoin/Diamond/releases
in case u compiled linux headless wallets check #masternodesetupguides for help
on our slack
(links to slack u find in the release link above)
Is it fix problem with incorrect 2400 dmd generation?https://github.com/DMDcoin/Diamond/releases
in case u compiled linux headless wallets check #masternodesetupguides for help
on our slack
(links to slack u find in the release link above)
additional we added some more code
in area security and reenable old DMDV2 features
example
changeaddress=yourstaticchangeaddress
is again possible to be used in diamond.conf
and with
setchangeaddress
getchangeaddress
u can manage it via console
(after wallet reboot it will fall back to the setting in conf)
September 20, 2017, 04:49:53 PM
hi all:) i have been seeing small payments come out my wallet
this is the transaction details.
Status: 515 confirmations, broadcast through 16 nodes
Date: 19-Sep-17 20:35
Total debit: -124.99998080 DMD
Total credit: 124.99998080 DMD
Transaction fee: -0.00001920 DMD
Net amount: -0.00001920 DMD
Transaction ID: c94083d49da44959de1272cfd3eb81ca579c1e6e30be4d1883e93e54aeb6af5f
Output index: 0
the 0.00001920 DMD is the amount that i see being tacken out???
there has been 5 happen so far. any idea what this is?
thanks
its a normal transacion: https://chainz.cryptoid.info/dmd/tx.dws?c94083d49da44959de1272cfd3eb81ca579c1e6e30be4d1883e93e54aeb6af5f.htmthis is the transaction details.
Status: 515 confirmations, broadcast through 16 nodes
Date: 19-Sep-17 20:35
Total debit: -124.99998080 DMD
Total credit: 124.99998080 DMD
Transaction fee: -0.00001920 DMD
Net amount: -0.00001920 DMD
Transaction ID: c94083d49da44959de1272cfd3eb81ca579c1e6e30be4d1883e93e54aeb6af5f
Output index: 0
the 0.00001920 DMD is the amount that i see being tacken out???
there has been 5 happen so far. any idea what this is?
thanks
you sent yourself something (to different address or change address), and the transaction fee was 0.00001920. no magic, no issue, so no fud pls.
i think u enabled multisend
i would not do it
u dont need it
diable it if u not have a really important usecase that needs it
(i can find none)
September 20, 2017, 04:42:21 PM
MANDATORY WALLET UPDATE:
https://github.com/DMDcoin/Diamond/releases
in case u compiled linux headless wallets check #masternodesetupguides for help
on our slack
(links to slack u find in the release link above)
Is it fix problem with incorrect 2400 dmd generation? https://github.com/DMDcoin/Diamond/releases
in case u compiled linux headless wallets check #masternodesetupguides for help
on our slack
(links to slack u find in the release link above)
September 20, 2017, 04:37:55 PM
MANDATORY WALLET UPDATE:
https://github.com/DMDcoin/Diamond/releases
in case u compiled linux headless wallets check #masternodesetupguides for help
on our slack
(links to slack u find in the release link above)
https://github.com/DMDcoin/Diamond/releases
in case u compiled linux headless wallets check #masternodesetupguides for help
on our slack
(links to slack u find in the release link above)
September 20, 2017, 04:37:02 PM
Mandatory Diamond Wallet update. Please discontinue using DMD 3.0.0.12 and download DMD 3.0.0.13 instead.
what happen if I continue using 3.0.0.12 ?
this means if u dont upgrade there will be a point
u become incompatible to DMD Diamond network
September 20, 2017, 04:35:09 PM
can someone explain how coin priority works please.
see above, some piles are lower priority yet more confirms than those with higher ?
whats the formula here ?
How does this interact with staking ?
thanks!
see above, some piles are lower priority yet more confirms than those with higher ?
whats the formula here ?
How does this interact with staking ?
thanks!
priority is a relict of POSv1 thats left as unimportant info in coin control
it have no meaning for staking in DMDv3 and POS3
important for POS3 is just coin pile size
age have no meaning
it dont increase chance to mint int dont increase rewards
September 20, 2017, 04:32:13 PM
Mandatory Diamond Wallet update. Please discontinue using DMD 3.0.0.12 and download DMD 3.0.0.13 instead.
what happen if I continue using 3.0.0.12 ?
September 20, 2017, 04:13:25 PM
hi all:) i have been seeing small payments come out my wallet
this is the transaction details.
Status: 515 confirmations, broadcast through 16 nodes
Date: 19-Sep-17 20:35
Total debit: -124.99998080 DMD
Total credit: 124.99998080 DMD
Transaction fee: -0.00001920 DMD
Net amount: -0.00001920 DMD
Transaction ID: c94083d49da44959de1272cfd3eb81ca579c1e6e30be4d1883e93e54aeb6af5f
Output index: 0
the 0.00001920 DMD is the amount that i see being tacken out???
there has been 5 happen so far. any idea what this is?
thanks
its a normal transacion: https://chainz.cryptoid.info/dmd/tx.dws?c94083d49da44959de1272cfd3eb81ca579c1e6e30be4d1883e93e54aeb6af5f.htmthis is the transaction details.
Status: 515 confirmations, broadcast through 16 nodes
Date: 19-Sep-17 20:35
Total debit: -124.99998080 DMD
Total credit: 124.99998080 DMD
Transaction fee: -0.00001920 DMD
Net amount: -0.00001920 DMD
Transaction ID: c94083d49da44959de1272cfd3eb81ca579c1e6e30be4d1883e93e54aeb6af5f
Output index: 0
the 0.00001920 DMD is the amount that i see being tacken out???
there has been 5 happen so far. any idea what this is?
thanks
you sent yourself something (to different address or change address), and the transaction fee was 0.00001920. no magic, no issue, so no fud pls.
September 20, 2017, 03:59:49 PM
hi all:) i have been seeing small payments come out my wallet
this is the transaction details.
Status: 515 confirmations, broadcast through 16 nodes
Date: 19-Sep-17 20:35
Total debit: -124.99998080 DMD
Total credit: 124.99998080 DMD
Transaction fee: -0.00001920 DMD
Net amount: -0.00001920 DMD
Transaction ID: c94083d49da44959de1272cfd3eb81ca579c1e6e30be4d1883e93e54aeb6af5f
Output index: 0
the 0.00001920 DMD is the amount that i see being tacken out???
there has been 5 happen so far. any idea what this is?
thanks
its a normal transacion: https://chainz.cryptoid.info/dmd/tx.dws?c94083d49da44959de1272cfd3eb81ca579c1e6e30be4d1883e93e54aeb6af5f.htmthis is the transaction details.
Status: 515 confirmations, broadcast through 16 nodes
Date: 19-Sep-17 20:35
Total debit: -124.99998080 DMD
Total credit: 124.99998080 DMD
Transaction fee: -0.00001920 DMD
Net amount: -0.00001920 DMD
Transaction ID: c94083d49da44959de1272cfd3eb81ca579c1e6e30be4d1883e93e54aeb6af5f
Output index: 0
the 0.00001920 DMD is the amount that i see being tacken out???
there has been 5 happen so far. any idea what this is?
thanks
you sent yourself something (to different address or change address), and the transaction fee was 0.00001920. no magic, no issue, so no fud pls.
September 20, 2017, 03:07:53 PM
onyatchi1, try the next algo: 1. copy your v2 wallet.dat to v3 work folder. 2. Run v3 wallet and open console. 3. Write: dumpwallet "keys". Wait until it finish. 4. Exit from wallet. 5. Remove wallet.dat from v3 folder and run v3 wallet again. 6. In console write: importwallet "keys". 7. Say thanks to danbi if it helps .
As I understand you have another dmd address in your v2 wallet.dat (not only dNXQdyhKBTzU2X61pDVoHnr4qzmj8G2Bwm). And when you migrate to v3 this address lost in some reason. But it still present at old wallet.dat. And you need import all private keys correctly.
.As I understand you have another dmd address in your v2 wallet.dat (not only dNXQdyhKBTzU2X61pDVoHnr4qzmj8G2Bwm). And when you migrate to v3 this address lost in some reason. But it still present at old wallet.dat. And you need import all private keys correctly.
September 20, 2017, 03:00:34 PM
@crowetic
I'm no dev, but the confirmation time for a staked coin pile is 640 blocks (approx 24 hours) and maturity time is 1 hour. Then you can stake the pile again.
can someone explain how coin priority works please.
see above, some piles are lower priority yet more confirms than those with higher ?
whats the formula here ?
How does this interact with staking ?
thanks!
see above, some piles are lower priority yet more confirms than those with higher ?
whats the formula here ?
How does this interact with staking ?
thanks!
To my understanding coin priotity doesn't have anything to do with staking, since coin age is removed in DMD v3. However, to explain coin priority or if it has some other function in the new DMD wallet is a topic for Christian
September 20, 2017, 12:49:38 PM
Hello!
help me
Importing and exporting Private Keys form DMD Wallet 2.0 to 3.0
When importing, only half of Wallet Balance is sent.
Some remain on the previous wallet.
v 2: 10090 DMD → V 3: 5080 DMD
I have only one address in V2 Wallet.
What kind of problems are there?
help me
Importing and exporting Private Keys form DMD Wallet 2.0 to 3.0
When importing, only half of Wallet Balance is sent.
Some remain on the previous wallet.
v 2: 10090 DMD → V 3: 5080 DMD
I have only one address in V2 Wallet.
What kind of problems are there?
Please provide your DMD address so that we can verify your balance in the block explorer.
After confirming the balance in Block Explorer, it was 5080 DMD.
https://chainz.cryptoid.info/dmd-v2/
I understand.
The balance display of v2 wallet is 10093 DMD.
On the Block Chain Explorer, the balance is only 5080DMD.
On September 3 I sent 62DMD to bittrex.
At this time, 4982 DMD seems to be sent to somewhere.
I do not remember sending it to this address.
address:
There is a possibility that it was stolen.
When you sent the 62 DMD to Bittrex it's possible that the rest of your big pile to split and 4982 DMD went into a new generated address. Go to your old wallet and use coin control to see if the 4982 DMD are not there. If yes, then you have to dump your private key of the address dNXQdyhKBTzU2X61pDVoHnr4qzmj8G2Bwm and import it into the new wallet.
Thanks to you, it seems to be settled.
I will give you a tip if I solve the problem.
September 20, 2017, 12:48:25 PM
can someone explain how coin priority works please.
see above, some piles are lower priority yet more confirms than those with higher ?
whats the formula here ?
How does this interact with staking ?
thanks!
see above, some piles are lower priority yet more confirms than those with higher ?
whats the formula here ?
How does this interact with staking ?
thanks!
September 20, 2017, 11:47:23 AM
Hi,
my coins dont stake. I imported private keys from 2.0 into a clean 3.0 wallet.
Config file has staking=1 and no other entries.
Diamond symbol in wallet shows "Staking is active" after i unlock it.
getstakingstatus says everything is fine:

{
"validtime" : true,
"haveconnections" : true,
"walletunlocked" : true,
"mintablecoins" : true,
"enoughcoins" : true,
"mnsync" : true
}
Wallet is running several days for 4-6 hours a day but no stake so far, maybe because i have 102 DMD only or can it be another reason?
Is there any additional info i could provide to dig into it?
DMD: dJfYvxfb2kv3x6UPyfTkTjiwFoPECMa5Rk
The wallet needs to stake 24/7,not a few hours. and secondly with only 102 diamonds in one pile of coins with these difficultys,:(my coins dont stake. I imported private keys from 2.0 into a clean 3.0 wallet.
Config file has staking=1 and no other entries.
Diamond symbol in wallet shows "Staking is active" after i unlock it.
getstakingstatus says everything is fine:

{
"validtime" : true,
"haveconnections" : true,
"walletunlocked" : true,
"mintablecoins" : true,
"enoughcoins" : true,
"mnsync" : true
}
Wallet is running several days for 4-6 hours a day but no stake so far, maybe because i have 102 DMD only or can it be another reason?
Is there any additional info i could provide to dig into it?
DMD: dJfYvxfb2kv3x6UPyfTkTjiwFoPECMa5Rk
The main thing is staking is 24/7. Wallet has to be staking all the time..
Further, get used to using coin control,activate coin control in options.
Then go look and see how many piles of coins you have..I'm guessing 1..
Jump to: