Topic: [ANN] FujiCoin | Japan | Since 2014 | The Best Crypto Currency - page 42. (Read 153365 times)

this is a good 2018 development project. . .
dev at the beginning of the year said the price will reach $ 0.5 if it wants to prove store this tokens in 2018
good team

is this the wallet coin can also be located in coinomi dev?

Most mining software is judged as virus by virus detection software.
In order to mining, it is necessary to stop these virus detection software. 

Ok I can say Well..
https://s14.postimg.org/9h5gtry7l/screenshot.179.jpg

https://s14.postimg.org/cb8m79xtt/screenshot.178.jpg

but not Very Well

https://s14.postimg.org/gx4qfpr3l/screenshot.177.jpg

ok, please try fujiminer:
https://mega.nz/#!fltX0DjT!zk0wOkso2MP_vQRsvuMdFS0UK2Gs5uTQWhc3Gdz2pu8

read README.txt

My direct experience isn't a "story", is real, I spent a lot of hours trying to use a GPU miner. This is my wallett address: FWqSdiERNp9i3dtE1M1ARbH4W1imgi1r29
and as You con see here http://explorer.fujicoin.org/ I started the mining months ago, always only with CPU because GPU never worked.

These are all the miner I tried, logically not all are for fujicoin:

https://s14.postimg.org/w9ap4kbu9/screenshot.173.jpg

but just for an example these are the results with the last sgminer (sgminer-5.6.1-nicehash-51-windows-i386) with some settings:

1) the setting You suggest on the official site, wrote in a file .bat

sgminer.exe --nfactor 11 -o stratum+tcp://cryptogrinder.com:5032 -u FWqSdiERNp9i3dtE1M1ARbH4W1imgi1r29 -p x

https://s14.postimg.org/hh5zcxg41/screenshot.174.jpg

only Hardware Error

2) the setting above changing difficulty

sgminer.exe --nfactor 11 -o stratum+tcp://cryptogrinder.com:5006 -u FWqSdiERNp9i3dtE1M1ARbH4W1imgi1r29 -p x

same reults...only Hardware error
https://s14.postimg.org/rfqxztxdt/screenshot.176.jpg

3) trying to use some tips found on internet the .bat file become:
set GPU_FORCE_64BIT_PTR 1
set GPU_MAX_HEAP_SIZE 100
set GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_ALLOC_PERCENT 100
set GPU_SINGLE_ALLOC_PERCENT 100
sgminer.exe --nfactor 11 -o stratum+tcp://cryptogrinder.com:5032 -u FWqSdiERNp9i3dtE1M1ARbH4W1imgi1r29 -p x

Try to guess the result? only Harware error....

I can continue with another 20/30 different tries using the miners wrote in my first post, the only result got is...Hardware error or  "low difficulty rejected".

I have never heard of stories that Fujicoin can not be mined by AMD's GPU.
What are you setting up for sgminer? 

I think this is the answer, but I also think this is exactly what the FJC community wants - to increase the price of the coin.

Maybe that's why (AMD) GPU mining "mysteriously" doesn't work...

Good to know that I am not the only one who had this difficulty.

I can also confirm that CPU mining works fine, but as you say it is way too slow (even with a good 6-core CPU) and not profitable.

I have the same problem with my R7 250 X i can receive only HW (Hardware error) or "low difficulty rejected" , depends on configuration file of the miner . I tried with:

sgminer
yacminer
vertminer
cgminer

and also with the intial fujiminer made by motty

no one seems to work.

I can confirm that cpuminer work perfectly but too slow for me.

Thanks

Anyone have any idea why sgminer won't mine any shares on cryptogrinder?

I'm following the guide on page one.

sgminer starts up and shows it is connected and hashing, but no shares and no stats on the "workers" list for my wallet.

So I tried cpuminer and it is working as expected. Starts earning shares within a few seconds.

I have used sgminer to mine other coins/algos without any problems.

Is there a trick to getting sgminer (with an RX480 8GB) to mine Fujicoin on cryptogrinder?

1) Their stats are quite shady and shitty.
Nice stats should probably look like this, for example:
https://etn.spacepools.org
https://pool.ellaism.org

2) Start mining and after 5 minutes check https://cryptogrinder.com/workers
Do you see your wallet there? Good, you are mining.
What is your hashrate?

3) After a "while", you should get paid, who knows how long does it take, see 1).
For payments, check http://explorer.fujicoin.org/ - paste in your wallet.
I've tested that pool several days ago and it "works".

4) Maybe you should consider mining another coin and instead buy some FJC.
For $10 you can get like 1250 FJC...

Hi there,

Great coin but I am somewhat confused as the pools are down (very unfortunate!).
So my ccminer .bat file has the following command line:
ccminer.exe -a scrypt:10 -o stratum+tcp://cryptogrinder.com:5032 -u MyCoinomiWalletAddress -p MyPassword

It is running fine and I get loads of "yes!", but am now very unsure where my coins will end up, and appear?

Also I never specified my Password anywhere else - can you please help?

Thank you so much!

Wow FujiCoin to the moon, great rally going on, touches 0.00000038, good time for holders 

I'm in 

GO Fujicoin!!!!!!!!!

http://fujicoin.org/community.php

It doesn't appear so, but the Devs are pretty active on here.

Is there a discord channel for this coin?

Great news for FJC 

1 Yes
2 Yes
3 Yes