Quote
261w at the wall running 2
same for me with a Corsair cx600
Topic: [ANN] FutureBit Project Apollo: Bringing ASIC Mining Back to the Home Miner! - page 18. (Read 37626 times)
December 17, 2018, 02:48:33 PM
same for me with a Corsair cx600
December 17, 2018, 12:51:54 PM
Mine are due to arrive Monday I can take a reading from my usage monitor then if its helpful?
Please do! I will do the same, but I don't want to reset my GPU rig just to do that, or play around with other PSU just to see usage. I will have plenty of time for that. So if you have chance please do.
so they arrived an hour ago just set the first up on an 1300w psu gold rated that I had spare (the fans really noisy so I haven't been using it)
the electricity monitor I have's reading 137-139w at the wall with everything on default settings which is giving ~98mh/s temps at around 66-67C
I'll get the second one running and be back with the results
261w at the wall running 2
December 17, 2018, 12:46:44 PM
Someone from the UK is already selling an Apollo on eBay for a very inflated price. That didn't take long.
Check it out.
https://www.ebay.com/itm/Futurebit-Apollo-WiFi-Ethernet-fastest-Litecoin-miner-in-the-world-150MH-s/183578245928?hash=item2abe1dbb28:g:6a8AAOSwcZ1cDoqx:rk:1:pf:1&frcectupt=true
Check it out.
https://www.ebay.com/itm/Futurebit-Apollo-WiFi-Ethernet-fastest-Litecoin-miner-in-the-world-150MH-s/183578245928?hash=item2abe1dbb28:g:6a8AAOSwcZ1cDoqx:rk:1:pf:1&frcectupt=true
I originally saw this at 519 GBP
December 16, 2018, 08:11:42 PM
Someone from the UK is already selling an Apollo on eBay for a very inflated price. That didn't take long.
Check it out.
https://www.ebay.com/itm/Futurebit-Apollo-WiFi-Ethernet-fastest-Litecoin-miner-in-the-world-150MH-s/183578245928?hash=item2abe1dbb28:g:6a8AAOSwcZ1cDoqx:rk:1:pf:1&frcectupt=true
Check it out.
https://www.ebay.com/itm/Futurebit-Apollo-WiFi-Ethernet-fastest-Litecoin-miner-in-the-world-150MH-s/183578245928?hash=item2abe1dbb28:g:6a8AAOSwcZ1cDoqx:rk:1:pf:1&frcectupt=true
December 16, 2018, 07:22:37 PM
If anyone has any recommendations for a power supply for the Apollo I’m all ears. I have an L3+ running on an APW3++, can I use the extra connector? Or am I better off picking up a stand-alone supply? For me noise is not a concern, I’d prefer clean power and reliability over a quiet build if that helps narrow down the choices.
Thanks in advance!
Thanks in advance!
You should be able to on eco setting
December 16, 2018, 04:28:16 PM
If anyone has any recommendations for a power supply for the Apollo I’m all ears. I have an L3+ running on an APW3++, can I use the extra connector? Or am I better off picking up a stand-alone supply? For me noise is not a concern, I’d prefer clean power and reliability over a quiet build if that helps narrow down the choices.
Thanks in advance!
Thanks in advance!
December 15, 2018, 09:19:54 PM
Are regular batch #1 orders haven't started yet or already sold out? I am pretty sure it's the latter 
they are not for sale until monday or maybe sunday. but saturday is a no go.
Mine is working I am running a l3+ and this one. off a bitmain psu.
the l3+ uses jstefanop's software and does 500mhs at 700 watts not 800
I added this unit it does 100mhs at 110 watts
so I am getting 600mh at 810 watts.
Come again? You're running an L3 and the apollo on an APW++?
Picture please.
Are you using the extra 6 pin PCIe for the Apollo?
no it is on the higher end apw5. the 5 is bitmain's quiet psu that can do 2600 watts.
https://support.bitmain.com/hc/en-us/articles/115000300633-How-to-set-up-and-use-your-APW5
here is a shot of an apw 5 from block operations.com
I will photo tomorrow.
Oh I took the unit off nice hash moved it to tb dice.
http://ltc.tbdice.org/users.htm
LMFrN...n6smN Self 112M / 0.361% 91.2M / 0.420% 15.7M / 0.433% 707K / 0.436% 101K / 0.436%
December 15, 2018, 08:30:47 PM
Are regular batch #1 orders haven't started yet or already sold out? I am pretty sure it's the latter
they are not for sale until monday or maybe sunday. but saturday is a no go.
Mine is working I am running a l3+ and this one. off a bitmain psu.
the l3+ uses jstefanop's software and does 500mhs at 700 watts not 800
I added this unit it does 100mhs at 110 watts
so I am getting 600mh at 810 watts.
Come again? You're running an L3 and the apollo on an APW++?
Picture please.
Are you using the extra 6 pin PCIe for the Apollo?
December 15, 2018, 08:23:21 PM
Are regular batch #1 orders haven't started yet or already sold out? I am pretty sure it's the latter
they are not for sale until monday or maybe sunday. but saturday is a no go.
Mine is working I am running a l3+ and this one. off a bitmain psu.
the l3+ uses jstefanop's software and does 500mhs at 700 watts not 800
I added this unit it does 100mhs at 110 watts
so I am getting 600mh at 810 watts.
December 12, 2018, 06:32:15 AM
Got the package. Looking awesome, just like the pictures!
Congrats on doing a really nice job with these, impressive production and great to see improvements to the entire process.
A real step up from the moonlander. Next up Mars?
Congrats on doing a really nice job with these, impressive production and great to see improvements to the entire process.
A real step up from the moonlander. Next up Mars?
December 15, 2018, 07:59:25 PM
Are regular batch #1 orders haven't started yet or already sold out? I am pretty sure it's the latter
December 15, 2018, 05:01:50 PM
Got mine today. Pretty excited.
I had no problem setting it up except for the power supply. I bought a 600w Kentek PSU. The damn thing is busted. I'm using my Bitmain APW++ PSU temporarily.
Other than my PSU problems, the Apollo is awesome and I mean AWESOME! Love it!
The UI is top-notch. Very well made.
Here are some images:
https://i.imgur.com/luVt7Cd.jpg
https://i.imgur.com/DhJhdly.jpg
https://i.imgur.com/MGTbr0c.jpg
I do have one question though. The Apollo description on the Futurebit.io website stated that you only need one 6 pin PCIe connector. On that back of the Apollo, there are two 6 pin slots. Do I need a PSU with two connectors?
I had no problem setting it up except for the power supply. I bought a 600w Kentek PSU. The damn thing is busted. I'm using my Bitmain APW++ PSU temporarily.
Other than my PSU problems, the Apollo is awesome and I mean AWESOME! Love it!
The UI is top-notch. Very well made.
Here are some images:
https://i.imgur.com/luVt7Cd.jpg
https://i.imgur.com/DhJhdly.jpg
https://i.imgur.com/MGTbr0c.jpg
I do have one question though. The Apollo description on the Futurebit.io website stated that you only need one 6 pin PCIe connector. On that back of the Apollo, there are two 6 pin slots. Do I need a PSU with two connectors?
Thanks! That was for the pre-production version, so we decided to play it safe on the production version since I'm sure someone will run this in turbo mode with a shitty low wire gauge ATX PSU on a single PCIE and burn out their cable.
A single connector for any PSU is fine in ECO mode, since its just pulling 100 watts. Anything above I would plug in two to be safe, and any literature going forward will specify two regardless.
For the seasoned folks you can run off just one cable even in turbo mode if you have one of those nice server PSUs with breakout board and 16 gauge wires.
Obviously with anything new be safe and make sure your feeling the PCIE connector and wire, slightly warm is fine but if its hot you need to plug in a second cable.
December 11, 2018, 04:56:13 PM
Hello guys,
may I ask on which pool are you gonna mine with Apollo?
Or will be using any services like ProHashing...
Thanks for sharing!
may I ask on which pool are you gonna mine with Apollo?
Or will be using any services like ProHashing...
Thanks for sharing!
Lots of testing over the past year with Litecoinpool, prohashing, hashtocoins etc. If you want a pool you can set and forget, I have found Litecoinpool.org to be the most stable and profitable if you’re sticking with LTC as final payout. I was really attracted to prohasing, but the constant coin switching delays and high fees make it not worth it. Some testing had prohashing ahead a bit, but overall litecoinpool wins in my book. Unless you have a lot of hash power, the LTC generated is negligible enough to not have to monitor 24/7.
What are your thoughts on multipool.us. I've been using it for a little while. I like the fact that one can merge mine Dogecoin and Viacoin. However, I don't like mining LTC on multipool. It doesn't use PPS for LTC.
I haven’t use that pool yet. I believe litecoinpool merge mines dogecoin, currently PPS payout is 104%. I may point some moonlanders to various pools and do some more 24hr tests when I get some time.
December 15, 2018, 03:50:37 PM
Got mine today. Pretty excited.
I had no problem setting it up except for the power supply. I bought a 600w Kentek PSU. The damn thing is busted. I'm using my Bitmain APW++ PSU temporarily.
Other than my PSU problems, the Apollo is awesome and I mean AWESOME! Love it!
The UI is top-notch. Very well made.
Here are some images:
https://i.imgur.com/luVt7Cd.jpg
https://i.imgur.com/DhJhdly.jpg
https://i.imgur.com/MGTbr0c.jpg
I do have one question though. The Apollo description on the Futurebit.io website stated that you only need one 6 pin PCIe connector. On that back of the Apollo, there are two 6 pin slots. Do I need a PSU with two connectors?
I had no problem setting it up except for the power supply. I bought a 600w Kentek PSU. The damn thing is busted. I'm using my Bitmain APW++ PSU temporarily.
Other than my PSU problems, the Apollo is awesome and I mean AWESOME! Love it!
The UI is top-notch. Very well made.
Here are some images:
https://i.imgur.com/luVt7Cd.jpg
https://i.imgur.com/DhJhdly.jpg
https://i.imgur.com/MGTbr0c.jpg
I do have one question though. The Apollo description on the Futurebit.io website stated that you only need one 6 pin PCIe connector. On that back of the Apollo, there are two 6 pin slots. Do I need a PSU with two connectors?
December 15, 2018, 10:18:30 AM
Mine are due to arrive Monday I can take a reading from my usage monitor then if its helpful?
Please do! I will do the same, but I don't want to reset my GPU rig just to do that, or play around with other PSU just to see usage. I will have plenty of time for that. So if you have chance please do.
December 14, 2018, 11:32:04 PM
My first unit arrived.
Mining away now, with 102.65 MH/s, Eco mode, fan on auto. Temperatures 65.5 for miner and 68.0 C for MCU.
PICTURES: https://imgur.com/a/tvMZvj0
Amazing job, jstefanop!
Mining away now, with 102.65 MH/s, Eco mode, fan on auto. Temperatures 65.5 for miner and 68.0 C for MCU.
PICTURES: https://imgur.com/a/tvMZvj0
Amazing job, jstefanop!
what is your wattage at wall and if u have that info what PSU model is powering it thank you
I plugged it to my GPU rig, powered by Thermaltake Toughpower 1500W. But for day to day use, any ATX power supply will do really, as long as it have 2x 8pin PCIE connectors. I have many secondary PSU lying around which I will use to power Apollos once I decided where exactly they will live this winter.
Usage jumped up for at least 100W (according to Thermaltake app, which reads it directly from PSU, I even have USB cable which goes from PSU to motherboard USB pinout, to read all stats from it), but I didn't measure it at the wall.
Mine are due to arrive Monday I can take a reading from my usage monitor then if its helpful?
December 14, 2018, 07:39:27 PM
Order #1213.
Haven't received mine yet. Supposed to get it today but it didn't arrive.
Haven't received mine yet. Supposed to get it today but it didn't arrive.
Looks like all East coast shipments were on that same fedex truck that got delayed...you guys should have them by Monday.
December 14, 2018, 07:17:20 PM
Order #1213.
Haven't received mine yet. Supposed to get it today but it didn't arrive.
Haven't received mine yet. Supposed to get it today but it didn't arrive.
December 10, 2018, 10:00:04 AM
Hello guys,
may I ask on which pool are you gonna mine with Apollo?
Or will be using any services like ProHashing...
Thanks for sharing!
may I ask on which pool are you gonna mine with Apollo?
Or will be using any services like ProHashing...
Thanks for sharing!
Lots of testing over the past year with Litecoinpool, prohashing, hashtocoins etc. If you want a pool you can set and forget, I have found Litecoinpool.org to be the most stable and profitable if you’re sticking with LTC as final payout. I was really attracted to prohasing, but the constant coin switching delays and high fees make it not worth it. Some testing had prohashing ahead a bit, but overall litecoinpool wins in my book. Unless you have a lot of hash power, the LTC generated is negligible enough to not have to monitor 24/7.
December 14, 2018, 03:06:03 PM
My first unit arrived.
Mining away now, with 102.65 MH/s, Eco mode, fan on auto. Temperatures 65.5 for miner and 68.0 C for MCU.
PICTURES: https://imgur.com/a/tvMZvj0
Amazing job, jstefanop!
Mining away now, with 102.65 MH/s, Eco mode, fan on auto. Temperatures 65.5 for miner and 68.0 C for MCU.
PICTURES: https://imgur.com/a/tvMZvj0
Amazing job, jstefanop!
what is your wattage at wall and if u have that info what PSU model is powering it thank you
I plugged it to my GPU rig, powered by Thermaltake Toughpower 1500W. But for day to day use, any ATX power supply will do really, as long as it have 2x 8pin PCIE connectors. I have many secondary PSU lying around which I will use to power Apollos once I decided where exactly they will live this winter.
Usage jumped up for at least 100W (according to Thermaltake app, which reads it directly from PSU, I even have USB cable which goes from PSU to motherboard USB pinout, to read all stats from it), but I didn't measure it at the wall.
Jump to: